AutoDefects
Español

Nissan Juke 2019: fiabilidad

15 % más fallos mecánicos que su clase

19.089 inspecciones MOT de Nissan Juke matriculados por primera vez en 2019: el 5,7 % no pasó por un defecto mecánico; la mediana de su clase con la misma edad y kilometraje es del 4,9 %.

Tasa de fallo mecánico
5,7%
Mediana de la clase, misma edad y kilometraje
4,9%
No pasó la MOT (cualquier motivo)
16,0%
inspecciones MOT
19.089
Llamadas a revisión
2

Qué falla según el kilometraje

KilometrajeInspeccionesFallo mecánicoMediana de la clase
0-50k km93663,4%2,6%
50-100k km88037,4%6,8%
100-150k km88011,0%10,3%
150k+ km4025,0%10,1%

Qué falla en este año

SistemaFallo mecánico
Suspensión y ruedas1,5%
Frenos3,1%
Motor, escape y emisiones0,5%
Dirección0,2%
Carrocería, bastidor y corrosión0,3%
Cinturones y airbags0,6%
Luces y electricidad (desgaste)2,4%
Neumáticos (desgaste)4,2%
Escobillas y parabrisas (desgaste)7,0%
Otros y matrículas (desgaste)0,1%

Llamadas a revisión oficiales

Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.

  • EU Safety Gate2019, 2020

    Due to a design change introducing an internal chamfer in the rear seat back lock button, the latch actuation rod can catch on this chamfer, preventing its upwards movement.As a result the rear seat back may not be…

    Texto completo

    Due to a design change introducing an internal chamfer in the rear seat back lock button, the latch actuation rod can catch on this chamfer, preventing its upwards movement.As a result the rear seat back may not be securely latched when returned to its upright position after folding, and the occupant of the rear seat and any items stored in the luggage compartment may not be correctly restrained in the event of an accident, increasing the risk of injury.

    A12/01430/21 ↗
  • EU Safety GateGrave2019

    Due to an error in the driver's airbag folding process, the heat shield may not move fully into position around the inflator when the airbag is activated.Consequently, hot gas can directly contact the front panel of the…

    Texto completo

    Due to an error in the driver's airbag folding process, the heat shield may not move fully into position around the inflator when the airbag is activated.Consequently, hot gas can directly contact the front panel of the airbag, causing burn damage to the bag material. As a result, the airbag may tear during inflation reducing its protective function.

    A12/00391/21 ↗