AutoDefects
Polski

Nissan Juke 2019: niezawodność

o 15% więcej usterek mechanicznych niż w klasie

19 089 badań MOT egzemplarzy Nissan Juke zarejestrowanych po raz pierwszy w 2019: 5,7% nie przeszło z powodu usterki mechanicznej; mediana klasy w tym samym wieku i z tym samym przebiegiem to 4,9%.

Usterki mechaniczne
5,7%
Mediana klasy, ten sam wiek i przebieg
4,9%
Negatywne badanie (dowolny powód)
16,0%
badań MOT
19 089
Akcje przywoławcze
2

Co się psuje w zależności od przebiegu

PrzebiegBadaniaUsterki mechaniczneMediana klasy
0-50k km93663,4%2,6%
50-100k km88037,4%6,8%
100-150k km88011,0%10,3%
150k+ km4025,0%10,1%

Co się psuje w tym roczniku

UkładUsterki mechaniczne
Zawieszenie i koła1,5%
Hamulce3,1%
Silnik, wydech i emisja0,5%
Układ kierowniczy0,2%
Nadwozie, podwozie i korozja0,3%
Pasy i poduszki powietrzne0,6%
Oświetlenie i elektryka (eksploatacja)2,4%
Opony (eksploatacja)4,2%
Wycieraczki i szyba (eksploatacja)7,0%
Inne i tablice (eksploatacja)0,1%

Oficjalne akcje przywoławcze

Akcje opublikowane przez NHTSA (USA) i EU Safety Gate, w których wymieniono ten model. Czy dotyczą konkretnego auta, sprawdź po VIN.

  • EU Safety Gate2019, 2020

    Due to a design change introducing an internal chamfer in the rear seat back lock button, the latch actuation rod can catch on this chamfer, preventing its upwards movement.As a result the rear seat back may not be…

    Pełny tekst

    Due to a design change introducing an internal chamfer in the rear seat back lock button, the latch actuation rod can catch on this chamfer, preventing its upwards movement.As a result the rear seat back may not be securely latched when returned to its upright position after folding, and the occupant of the rear seat and any items stored in the luggage compartment may not be correctly restrained in the event of an accident, increasing the risk of injury.

    A12/01430/21 ↗
  • EU Safety GatePoważne2019

    Due to an error in the driver's airbag folding process, the heat shield may not move fully into position around the inflator when the airbag is activated.Consequently, hot gas can directly contact the front panel of the…

    Pełny tekst

    Due to an error in the driver's airbag folding process, the heat shield may not move fully into position around the inflator when the airbag is activated.Consequently, hot gas can directly contact the front panel of the airbag, causing burn damage to the bag material. As a result, the airbag may tear during inflation reducing its protective function.

    A12/00391/21 ↗