AutoDefects
Deutsch

Nissan Juke 2014: Zuverlässigkeit

41% mehr technische Mängel als die Klasse

36.520 MOT-Prüfungen von Nissan Juke mit Erstzulassung 2014: 31,0% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 22,0%.

Technische Mängelquote
31,0%
Klassenmedian, gleiches Alter und gleiche Laufleistung
22,0%
Durchgefallen (jeder Grund)
39,7%
MOT-Prüfungen
36.520
Rückrufe
5

Was nach Laufleistung ausfällt

LaufleistungPrüfungenTechnische MängelKlassenmedian
0-50k km1.4768,7%8,7%
50-100k km11.64321,7%15,8%
100-150k km15.88335,1%23,2%
150k+ km7.51841,3%31,8%

Was bei diesem Baujahr ausfällt

BaugruppeTechnische Mängel
Fahrwerk und Räder18,8%
Bremsen10,0%
Motor, Abgasanlage und Emissionen4,6%
Lenkung7,9%
Karosserie, Rahmen und Rost4,0%
Gurte und Airbags1,2%
Licht und Elektrik (Verschleiß)8,9%
Reifen (Verschleiß)7,6%
Wischer und Scheibe (Verschleiß)7,3%
Sonstiges und Kennzeichen (Verschleiß)0,3%

Amtliche Rückrufe

Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.

  • EU Safety Gate2014–2016

    null The sensor of the rear oxygen sensor might fail and does not set a Diagnostic Trouble Code (DTC) in case of inappropriate content of the exhaust gases. In such cases, the user is not warned through the Malfunction…

    Volltext

    null The sensor of the rear oxygen sensor might fail and does not set a Diagnostic Trouble Code (DTC) in case of inappropriate content of the exhaust gases. In such cases, the user is not warned through the Malfunction Indicator Light (MIL) on the dashboard.

    A12/0879/16 ↗
  • NHTSA (US)2013, 2014

    Nissan North America, Inc. (Nissan) is recalling certain model year 2014 Versa Sedan vehicles manufactured July 16, 2013, to January 29, 2014, 2013-2014 Cube vehicles manufactured July 3, 2013, to October 21, 2013, and…

    Volltext

    Nissan North America, Inc. (Nissan) is recalling certain model year 2014 Versa Sedan vehicles manufactured July 16, 2013, to January 29, 2014, 2013-2014 Cube vehicles manufactured July 3, 2013, to October 21, 2013, and 2013-2014 Juke vehicles manufactured July 3, 2013, to October 22, 2013. When exposed to hot temperatures, the affected vehicles have an engine start/stop button that may stick inside the button housing.

    15V418000 ↗
  • EU Safety Gate2013–2015

    null The push engine start switch may remain in the pressed position and not return after switching the engine on. If the vehicle continues to be driven in this condition, the emergency engine stop function may operate…

    Volltext

    null The push engine start switch may remain in the pressed position and not return after switching the engine on. If the vehicle continues to be driven in this condition, the emergency engine stop function may operate and cause the engine to stop unexpectedly.

    A12/0850/15 ↗
  • EU Safety GateErnst2012–2014

    null The fuel rail pressure sensor of some vehicles may be tightened insufficiently to the fuel rail of the engine and it may loosen gradually due to heat and vibration of the engine. If left undetected and the vehicle…

    Volltext

    null The fuel rail pressure sensor of some vehicles may be tightened insufficiently to the fuel rail of the engine and it may loosen gradually due to heat and vibration of the engine. If left undetected and the vehicle continues to be driven in this condition, in an extreme case, fuel leakage may occur between the fuel rail pressure sensor and the fuel rail.

    A12/1975/14 ↗
  • NHTSA (US)Ernst2012–2014

    Nissan North America, Inc. (Nissan) is recalling certain model year 2012-2014 Nissan Juke, 2012-2013 Infiniti M56, QX56, and 2014-2015 Infiniti Q70 (V8 engine vehicles only), and QX80 vehicles. The fuel pressure sensors…

    Volltext

    Nissan North America, Inc. (Nissan) is recalling certain model year 2012-2014 Nissan Juke, 2012-2013 Infiniti M56, QX56, and 2014-2015 Infiniti Q70 (V8 engine vehicles only), and QX80 vehicles. The fuel pressure sensors may not have been sufficiently tightened during production. As a result, the fuel pressure sensor may loosen with vehicle usage and cause a fuel leak.

    14V683000 ↗