AutoDefects
Deutsch

Mercedes-Benz CLS 2017: Zuverlässigkeit

34% mehr technische Mängel als die Klasse

1.505 MOT-Prüfungen von Mercedes-Benz CLS mit Erstzulassung 2017: 9,4% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 7,0%.

Technische Mängelquote
9,4%
Klassenmedian, gleiches Alter und gleiche Laufleistung
7,0%
Durchgefallen (jeder Grund)
20,3%
MOT-Prüfungen
1.505
Rückrufe
10

Was nach Laufleistung ausfällt

LaufleistungPrüfungenTechnische MängelKlassenmedian
0-50k km1627,4%3,9%
50-100k km7237,8%6,2%
100-150k km45511,9%8,6%
150k+ km16511,5%9,1%

Was bei diesem Baujahr ausfällt

BaugruppeTechnische Mängel
Fahrwerk und Räder4,8%
Bremsen2,8%
Motor, Abgasanlage und Emissionen2,3%
Lenkung0,0%
Karosserie, Rahmen und Rost0,3%
Gurte und Airbags0,1%
Licht und Elektrik (Verschleiß)1,8%
Reifen (Verschleiß)11,0%
Wischer und Scheibe (Verschleiß)0,5%
Sonstiges und Kennzeichen (Verschleiß)0,6%

Amtliche Rückrufe

Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.

  • EU Safety GateErnst2017–2022

    The electrical connector of the transmission wiring harness may not have been correctly processed. This can lead to water entering the connector, which could cause short circuit and can create a thermal overload of the…

    Volltext

    The electrical connector of the transmission wiring harness may not have been correctly processed. This can lead to water entering the connector, which could cause short circuit and can create a thermal overload of the connector when the vehicle is parked, causing the risk of fire.

    A12/01979/24 ↗
  • EU Safety Gate2010–2017

    The aluminium bolts of the steering box may break. This can lead to detachment of the steering box from the power block, creating a risk of an accident.

    A12/00185/23 ↗
  • EU Safety GateErnst2015–2022

    The seal for the special plug-in contact of the gearbox designed to protect against contact with moisture and splashing water is improperly installed. Thus splashed water can enter the socket contact when driving in wet…

    Volltext

    The seal for the special plug-in contact of the gearbox designed to protect against contact with moisture and splashing water is improperly installed. Thus splashed water can enter the socket contact when driving in wet conditions and can lead to a short circuit, increasing the risk of a fire.

    A12/01237/22 ↗
  • EU Safety GateErnst2016–2020

    A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine compartment. Consequently, leaking fuel may come into contact with hot parts of the…

    Volltext

    A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine compartment. Consequently, leaking fuel may come into contact with hot parts of the engine, increasing the risk of fire.

    A12/00017/22 ↗
  • EU Safety GateErnst2017–2021

    The vacuum-controlled coolant pump may not be tightly sealed between the coolant and vacuum circuits. This may result in the coolant leaking into the vacuum circuit leading to an electrochemical reaction, increasing the…

    Volltext

    The vacuum-controlled coolant pump may not be tightly sealed between the coolant and vacuum circuits. This may result in the coolant leaking into the vacuum circuit leading to an electrochemical reaction, increasing the risk of fire.

    A12/00045/22 ↗
  • EU Safety GateErnst2015–2019

    Moisture can penetrate into the busbar, giving rise to conductive contacts between the individual lines inside it. The resulting current flows could overheat the plastic material of the busbar, increasing the risk of…

    A12/00618/20 ↗
4 weitere Rückrufe anzeigen
  • EU Safety GateErnst2017, 2018

    The riveting of the front seat belt housing covers may be inadequate under low temperatures (below -17.5°C). In the event of an accident, the rivets could fail and release the housing cover. This can result in a loss of…

    Volltext

    The riveting of the front seat belt housing covers may be inadequate under low temperatures (below -17.5°C). In the event of an accident, the rivets could fail and release the housing cover. This can result in a loss of the seat belt’s restraining effect, increasing the risk of injury.

    A12/0783/19 ↗
  • EU Safety Gate2014–2018

    In vehicles with rear-wheel drive, a lock nut in the steering gear may be cracked. Consequently, when the steering is placed under high forces it could break, which would block the steering gear and increase the risk of…

    Volltext

    In vehicles with rear-wheel drive, a lock nut in the steering gear may be cracked. Consequently, when the steering is placed under high forces it could break, which would block the steering gear and increase the risk of accident.

    A12/0296/19 ↗
  • EU Safety Gate2014–2018

    There may be cracks in a securing nut in the steering gear of rear-wheel-drive vehicles. The nut could consequently break if the steering system is subject to a very high lateral force, which could result in rotating…

    Volltext

    There may be cracks in a securing nut in the steering gear of rear-wheel-drive vehicles. The nut could consequently break if the steering system is subject to a very high lateral force, which could result in rotating parts in the steering gear affecting the casing and thereby blocking the steering system.

    A12/0164/19 ↗
  • EU Safety GateErnst2017, 2018

    The calibration of the occupant classification system for the passenger seat does not work correctly. If a child seat is installed on the passenger seat, the airbag might not be deactivated and be deployed in the event…

    Volltext

    The calibration of the occupant classification system for the passenger seat does not work correctly. If a child seat is installed on the passenger seat, the airbag might not be deactivated and be deployed in the event of an accident.

    A12/1447/18 ↗