AutoDefects
Deutsch

Premium-Mittelklasse

Mercedes-Benz CLS: Zuverlässigkeit

Bei 23.613 britischen MOT-Prüfungen fielen 16,9% der Mercedes-Benz CLS wegen eines technischen oder Karosseriemangels durch. Median eines Premium-Mittelklassewagens gleichen Alters und gleicher Laufleistung: 13,8%.

56von 100Unterdurchschnittlich23% mehr technische Mängel als die Klasse
Beste Baujahre
—
Baujahre mit den meisten Mängeln
2014, 2018, 2019
Schwachstelle bei hoher Laufleistung
Fahrwerk und Räder, Bremsen
Amtliche Rückrufe
29 Rückrufe, davon 18 ernst
Technische Mängelquote
16,9%
Klassenmedian, gleiches Alter und gleiche Laufleistung
13,8%
MOT-Prüfungen
23.613
Beschwerden von US-Haltern
0

MOT-Ergebnisse nach Prüfjahr

Alle Fahrzeuge dieses Modells bei der Prüfung des jeweiligen Jahres im Vergleich mit der Klasse bei gleichem Alter und gleicher Laufleistung. Zeigt, ob das Modell mit dem Alter mithält.

PrüfjahrPrüfungenTechnische MängelKlassenmedianAlle Mängel
202423.61316,9%13,8%26,4%
202325.19215,7%13,3%24,8%

Mängelquote nach Jahr der Erstzulassung

Technische Mängelquote bei der MOT-Prüfung 2024 nach Jahr der Erstzulassung, verglichen mit dem Klassenmedian bei gleichem Alter und gleicher Laufleistung.

Dieses ModellKlassenmedian
0%9%19%2005: 22,2%2005 Klassenmedian: 23,3%052006: 24,6%2006 Klassenmedian: 22,0%062007: 25,5%2007 Klassenmedian: 20,7%072008: 24,3%2008 Klassenmedian: 22,4%082009: 24,9%2009 Klassenmedian: 22,5%092010: 22,9%2010 Klassenmedian: 19,1%102011: 19,3%2011 Klassenmedian: 16,7%112012: 16,7%2012 Klassenmedian: 16,3%122013: 17,8%2013 Klassenmedian: 12,9%132014: 15,2%2014 Klassenmedian: 10,2%142015: 12,0%2015 Klassenmedian: 9,6%152016: 10,3%2016 Klassenmedian: 8,3%162017: 9,4%2017 Klassenmedian: 7,0%172018: 9,6%2018 Klassenmedian: 5,5%182019: 8,0%2019 Klassenmedian: 4,1%192020: 12,0%2020 Klassenmedian: 3,8%202021: 10,5%2021 Klassenmedian: 2,1%21
JahrPrüfungenTechnische MängelKlassenmedianAlle MängelRückrufe
20215710,5%2,1%17,5%8
202029112,0%3,8%21,3%7
20191.0888,0%4,1%16,1%7
20189919,6%5,5%18,2%12
20171.5059,4%7,0%20,3%10
20162.10810,3%8,3%20,8%9
20152.89012,0%9,6%21,5%9
20141.78715,2%10,2%24,1%7
20133.04217,8%12,9%25,7%4
20121.11716,7%16,3%25,8%4
20111.15619,3%16,7%27,5%3
20101.06422,9%19,1%36,0%5
20091.10824,9%22,5%36,6%3
20081.36824,3%22,4%35,8%3
20071.70725,5%20,7%34,5%3
20061.36824,6%22,0%32,3%3
200595622,2%23,3%31,4%3

Was nach Laufleistung ausfällt

Anteil der Prüfungen, die an der jeweiligen Baugruppe scheiterten. Verschleißteile (Lampen, Reifen, Wischer, Kennzeichen) zählen nicht zum Zuverlässigkeitswert.

Baugruppe0-50k km50-100k km100-150k km150k+ km
Technische Mängel6,9% (3,7)10,3% (7,2)15,8% (12,3)22,1% (19,1)
Prüfungen1.2115.1256.92410.353
Fahrwerk und Räder4,3% (0,7)5,5% (2,0)8,6% (4,8)12,9% (9,4)
Bremsen1,4% (0,8)3,2% (2,2)5,7% (3,9)9,0% (5,7)
Motor, Abgasanlage und Emissionen1,2% (0,6)2,0% (1,2)3,3% (1,7)4,3% (3,2)
Lenkung0,0% (0,0)0,2% (0,1)0,6% (0,3)2,3% (1,1)
Karosserie, Rahmen und Rost0,1% (0,2)0,4% (0,4)0,9% (0,9)1,5% (1,4)
Gurte und Airbags0,0% (0,1)0,2% (0,2)0,4% (0,5)0,7% (0,9)
Licht und Elektrik (Verschleiß)1,6% (1,1)2,0% (1,8)4,0% (3,2)8,5% (7,5)
Reifen (Verschleiß)8,0% (5,0)8,9% (6,8)10,4% (7,3)10,8% (7,8)
Wischer und Scheibe (Verschleiß)0,7% (0,9)0,9% (1,2)1,9% (1,9)3,0% (3,1)
Sonstiges und Kennzeichen (Verschleiß)0,3% (0,3)0,5% (0,4)0,5% (0,4)0,5% (0,5)

(…) = Klassenmedian, gleiches Alter und gleiche Laufleistung

Checkliste für die Werkstatt vor dem Kauf

Abgeleitet aus den Baugruppen, bei denen dieses Modell ab 100.000 km häufiger durchfällt als seine Klasse, und aus offenen Rückrufen.

  1. Fahrwerk und Räder: Querlenker, Buchsen, Traggelenke, Federn und Stoßdämpfer auf Spiel, Risse und Undichtigkeiten prüfen; auf ungleichmäßigen Reifenverschleiß achten.
  2. Bremsen: Scheiben und Beläge messen, Bremsleitungen und -schläuche auf Rost prüfen, Handbremse und ABS-Leuchte testen.
  3. Rückrufe: 5 ernste Rückrufe betreffen dieses Modell – lassen Sie sich die Erledigung nachweisen
    • SR/03711/24 · 2010–2016 · The three aluminium screws of the steering box may corrode due to exposure to spray water and aggressive road-grit (salt) used for melting…
    • A12/01979/24 · 2017–2022 · The electrical connector of the transmission wiring harness may not have been correctly processed. This can lead to water entering the…
    • A12/01980/24 · 2020, 2021 · The software of the airbag control module may be faulty. In the event of an accident, this can lead the active bonnet system not to be…
    • A12/00463/24 · 2021–2023 · The 48V ground cable bolt in the engine compartment may be incorrectly secured. This could increase electrical transition resistance at the…
    • A12/01237/22 · 2015–2022 · The seal for the special plug-in contact of the gearbox designed to protect against contact with moisture and splashing water is improperly…

    Ein bestimmtes Auto per FIN auf den offiziellen Seiten prüfen: NHTSA (US) · DVSA (UK)

Amtliche Rückrufe

Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.

  • EU Safety GateErnst2010–2016

    The three aluminium screws of the steering box may corrode due to exposure to spray water and aggressive road-grit (salt) used for melting ice. Advanced corrosion could weaken the screws, leading to potential breakage…

    Volltext

    The three aluminium screws of the steering box may corrode due to exposure to spray water and aggressive road-grit (salt) used for melting ice. Advanced corrosion could weaken the screws, leading to potential breakage during manoeuvring or parking. If all fixing screws fail, the power-assisted steering could detach, resulting in a loss of power steering and an increased risk of an accident.

    SR/03711/24 ↗
  • EU Safety GateErnst2017–2022

    The electrical connector of the transmission wiring harness may not have been correctly processed. This can lead to water entering the connector, which could cause short circuit and can create a thermal overload of the…

    Volltext

    The electrical connector of the transmission wiring harness may not have been correctly processed. This can lead to water entering the connector, which could cause short circuit and can create a thermal overload of the connector when the vehicle is parked, causing the risk of fire.

    A12/01979/24 ↗
  • EU Safety GateErnst2020, 2021

    The software of the airbag control module may be faulty. In the event of an accident, this can lead the active bonnet system not to be activated properly. This increases the risk of injury to other road users.

    A12/01980/24 ↗
  • EU Safety GateErnst2021–2023

    The 48V ground cable bolt in the engine compartment may be incorrectly secured. This could increase electrical transition resistance at the point of connection. As a result, the high electrical currents that can flow…

    Volltext

    The 48V ground cable bolt in the engine compartment may be incorrectly secured. This could increase electrical transition resistance at the point of connection. As a result, the high electrical currents that can flow through this connection could increase the temperature, increasing the risk of fire. Furthermore, the 48V electrical power supply failure may increase exhaust emissions. This could have a negative impact on the environment.

    A12/00463/24 ↗
  • EU Safety Gate2022, 2023

    The exit warning function, which warns car occupants not to open doors when traffic is approaching, may malfunction. This creates a risk of an accident.

    A12/02219/23 ↗
  • EU Safety Gate2000–2010

    Due to improper adhesive bonding of the glass panel to the sliding roof frame, the panel may detach from the moving vehicle, creating a risk of an accident, injuries.

    A12/00391/23 ↗
23 weitere Rückrufe anzeigen
  • EU Safety Gate2010–2017

    The aluminium bolts of the steering box may break. This can lead to detachment of the steering box from the power block, creating a risk of an accident.

    A12/00185/23 ↗
  • EU Safety GateErnst2015–2022

    The seal for the special plug-in contact of the gearbox designed to protect against contact with moisture and splashing water is improperly installed. Thus splashed water can enter the socket contact when driving in wet…

    Volltext

    The seal for the special plug-in contact of the gearbox designed to protect against contact with moisture and splashing water is improperly installed. Thus splashed water can enter the socket contact when driving in wet conditions and can lead to a short circuit, increasing the risk of a fire.

    A12/01237/22 ↗
  • EU Safety GateErnst2016–2020

    A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine compartment. Consequently, leaking fuel may come into contact with hot parts of the…

    Volltext

    A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine compartment. Consequently, leaking fuel may come into contact with hot parts of the engine, increasing the risk of fire.

    A12/00017/22 ↗
  • EU Safety GateErnst2021

    The screw connection of the 48 V ground connector of the coolant electric compressor may come loose and lead to improper attachment of the ground line cable head. This increases the electrical contact resistance and can…

    Volltext

    The screw connection of the 48 V ground connector of the coolant electric compressor may come loose and lead to improper attachment of the ground line cable head. This increases the electrical contact resistance and can cause the temperature at the connection point to increase, increasing the risk of fire.

    A12/00901/22 ↗
  • EU Safety GateErnst2017–2021

    The vacuum-controlled coolant pump may not be tightly sealed between the coolant and vacuum circuits. This may result in the coolant leaking into the vacuum circuit leading to an electrochemical reaction, increasing the…

    Volltext

    The vacuum-controlled coolant pump may not be tightly sealed between the coolant and vacuum circuits. This may result in the coolant leaking into the vacuum circuit leading to an electrochemical reaction, increasing the risk of fire.

    A12/00045/22 ↗
  • EU Safety Gate2021

    In certain vehicles with a calliper disc-brake system, the bolts of the brake callipers on the front axle may not meet the specifications. A brake calliper can detach during braking, which may lead to braking power…

    Volltext

    In certain vehicles with a calliper disc-brake system, the bolts of the brake callipers on the front axle may not meet the specifications. A brake calliper can detach during braking, which may lead to braking power being reduced and components being lost. That would increase the potential risk of accidents, including for the following traffic.

    A12/01658/21 ↗
  • EU Safety Gate2021

    The mounting screws of the disc brake callipers on the front axle may not be in line with specifications. As a result, when braking, a disc brake calliper may detach, increasing the risk of accidents.

    A12/01603/21 ↗
  • EU Safety Gate2020

    The electrical connector of the side-impact sensors might not be correctly latched and could become detached.This would lead to delayed activation of the restraint systems in the event of a side impact, reducing their…

    Volltext

    The electrical connector of the side-impact sensors might not be correctly latched and could become detached.This would lead to delayed activation of the restraint systems in the event of a side impact, reducing their restraining effect and increasing the risk of injury to the vehicle occupants.

    A12/01361/21 ↗
  • EU Safety GateErnst2018

    Cracks could occur in the high pressure lines between the fuel rail and the injectors. As a result, diesel fuel could leak into the engine compartment, increasing the risk of fire.Moreover, due to the fuel leak the…

    Volltext

    Cracks could occur in the high pressure lines between the fuel rail and the injectors. As a result, diesel fuel could leak into the engine compartment, increasing the risk of fire.Moreover, due to the fuel leak the engine might not start, or the emergency operating mode might be activated.

    A12/00598/21 ↗
  • EU Safety GateErnst2018–2020

    Due to the lack of documentation, there is no confirmation that the screw connections of the turbocharger’s oil-supply and oil-return pipes were correctly executed during the assembly process. In the event of a loose…

    Volltext

    Due to the lack of documentation, there is no confirmation that the screw connections of the turbocharger’s oil-supply and oil-return pipes were correctly executed during the assembly process. In the event of a loose screw connection, oil might leak at the oil-supply and/or oil-return pipe of the turbocharger.The leaking oil might then come into contact with hot components, increasing the risk of fire.

    A12/01336/20 ↗
  • EU Safety GateErnst2015–2019

    Moisture can penetrate into the busbar, giving rise to conductive contacts between the individual lines inside it. The resulting current flows could overheat the plastic material of the busbar, increasing the risk of…

    A12/00618/20 ↗
  • EU Safety Gate2000–2010

    The adhesive bond between the glass panel and the sliding-roof frame may not meet the specifications. As a result, the glass panel could become completely detached from the vehicle, posing the risk to the following…

    Volltext

    The adhesive bond between the glass panel and the sliding-roof frame may not meet the specifications. As a result, the glass panel could become completely detached from the vehicle, posing the risk to the following traffic.

    A12/00280/20 ↗
  • EU Safety GateErnst2018, 2019

    The fixing screws for the turbocharger oil return line and the crankcase breather pipe may have been interchanged. Due to a screw being too long, the pre-tensioning force of the screw connection may be insufficient and…

    Volltext

    The fixing screws for the turbocharger oil return line and the crankcase breather pipe may have been interchanged. Due to a screw being too long, the pre-tensioning force of the screw connection may be insufficient and oil could leak from the turbocharger oil return line. As a result, oil could come into contact with hot components, increasing the risk of fire.

    A12/1130/19 ↗
  • EU Safety GateErnst2017, 2018

    The riveting of the front seat belt housing covers may be inadequate under low temperatures (below -17.5°C). In the event of an accident, the rivets could fail and release the housing cover. This can result in a loss of…

    Volltext

    The riveting of the front seat belt housing covers may be inadequate under low temperatures (below -17.5°C). In the event of an accident, the rivets could fail and release the housing cover. This can result in a loss of the seat belt’s restraining effect, increasing the risk of injury.

    A12/0783/19 ↗
  • EU Safety Gate2014–2018

    In vehicles with rear-wheel drive, a lock nut in the steering gear may be cracked. Consequently, when the steering is placed under high forces it could break, which would block the steering gear and increase the risk of…

    Volltext

    In vehicles with rear-wheel drive, a lock nut in the steering gear may be cracked. Consequently, when the steering is placed under high forces it could break, which would block the steering gear and increase the risk of accident.

    A12/0296/19 ↗
  • EU Safety Gate2014–2018

    There may be cracks in a securing nut in the steering gear of rear-wheel-drive vehicles. The nut could consequently break if the steering system is subject to a very high lateral force, which could result in rotating…

    Volltext

    There may be cracks in a securing nut in the steering gear of rear-wheel-drive vehicles. The nut could consequently break if the steering system is subject to a very high lateral force, which could result in rotating parts in the steering gear affecting the casing and thereby blocking the steering system.

    A12/0164/19 ↗
  • EU Safety GateErnst2017, 2018

    The calibration of the occupant classification system for the passenger seat does not work correctly. If a child seat is installed on the passenger seat, the airbag might not be deactivated and be deployed in the event…

    Volltext

    The calibration of the occupant classification system for the passenger seat does not work correctly. If a child seat is installed on the passenger seat, the airbag might not be deactivated and be deployed in the event of an accident.

    A12/1447/18 ↗
  • EU Safety Gate2016

    null The underbody panelling under the engine compartment may not be properly connected to the front bumper. In the event of a collision with a pedestrian, this would increase the risk of injury to the pedestrian's legs.

    A12/0904/17 ↗
  • EU Safety GateErnst2003–2016

    null Following the update of the control unit coding, the coding parameters of the control unit could be defective. This could give rise to various unplanned reactions in the vehicle: the wrong airbag could be triggered…

    Volltext

    null Following the update of the control unit coding, the coding parameters of the control unit could be defective. This could give rise to various unplanned reactions in the vehicle: the wrong airbag could be triggered in the event of an accident, the airbag control unit may not recognise the belt buckle status, the engine control unit could be coded with a false maximum speed or various assistance systems may not function.

    A12/0457/17 ↗
  • EU Safety GateErnst2015

    null Cracks may form in the high-pressure fuel pipes leading to a fuel leak and a vehicle fire.

    A12/0284/16 ↗
  • EU Safety GateErnst2015

    null The seal of the engine compartment may come loose. Under certain circumstances, this could lead to a contact between the seal and hot components, posing a risk of fire.

    A12/1139/15 ↗
  • EU Safety GateErnst2012–2014

    null The engine compartment seal of the partition plate could come loose. Under certain circumstances, this could lead to contact between the seal and hot components and the risk of a fire.

    A12/0469/15 ↗
  • EU Safety Gate2014

    null The gasket seal for the engine's chain tensioner may display incorrect settling behaviour. Over time, this may result in the chain tensioner detaching from the threaded hole on the cylinder head and the leakage of…

    Volltext

    null The gasket seal for the engine's chain tensioner may display incorrect settling behaviour. Over time, this may result in the chain tensioner detaching from the threaded hole on the cylinder head and the leakage of engine oil. The loss of large amounts of engine oil may contaminate the road, leading to a possible hazard for traffic following behind.

    A12/2167/14 ↗