AutoDefects
Deutsch

Mercedes-Benz CLS 2020: Zuverlässigkeit

215% mehr technische Mängel als die Klasse

291 MOT-Prüfungen von Mercedes-Benz CLS mit Erstzulassung 2020: 12,0% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 3,8%.

Technische Mängelquote
12,0%
Klassenmedian, gleiches Alter und gleiche Laufleistung
3,8%
Durchgefallen (jeder Grund)
21,3%
MOT-Prüfungen
291
Rückrufe
7

Was nach Laufleistung ausfällt

LaufleistungPrüfungenTechnische MängelKlassenmedian
0-50k km14110,6%3,1%
50-100k km12814,8%4,5%
100-150k km195,3%4,4%
150k+ km30,0%3,5%

Was bei diesem Baujahr ausfällt

BaugruppeTechnische Mängel
Fahrwerk und Räder10,3%
Bremsen1,4%
Motor, Abgasanlage und Emissionen0,3%
Lenkung0,0%
Karosserie, Rahmen und Rost0,0%
Gurte und Airbags0,0%
Licht und Elektrik (Verschleiß)1,7%
Reifen (Verschleiß)11,7%
Wischer und Scheibe (Verschleiß)0,3%
Sonstiges und Kennzeichen (Verschleiß)0,0%

Amtliche Rückrufe

Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.

  • EU Safety GateErnst2017–2022

    The electrical connector of the transmission wiring harness may not have been correctly processed. This can lead to water entering the connector, which could cause short circuit and can create a thermal overload of the…

    Volltext

    The electrical connector of the transmission wiring harness may not have been correctly processed. This can lead to water entering the connector, which could cause short circuit and can create a thermal overload of the connector when the vehicle is parked, causing the risk of fire.

    A12/01979/24 ↗
  • EU Safety GateErnst2020, 2021

    The software of the airbag control module may be faulty. In the event of an accident, this can lead the active bonnet system not to be activated properly. This increases the risk of injury to other road users.

    A12/01980/24 ↗
  • EU Safety GateErnst2015–2022

    The seal for the special plug-in contact of the gearbox designed to protect against contact with moisture and splashing water is improperly installed. Thus splashed water can enter the socket contact when driving in wet…

    Volltext

    The seal for the special plug-in contact of the gearbox designed to protect against contact with moisture and splashing water is improperly installed. Thus splashed water can enter the socket contact when driving in wet conditions and can lead to a short circuit, increasing the risk of a fire.

    A12/01237/22 ↗
  • EU Safety GateErnst2016–2020

    A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine compartment. Consequently, leaking fuel may come into contact with hot parts of the…

    Volltext

    A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine compartment. Consequently, leaking fuel may come into contact with hot parts of the engine, increasing the risk of fire.

    A12/00017/22 ↗
  • EU Safety GateErnst2017–2021

    The vacuum-controlled coolant pump may not be tightly sealed between the coolant and vacuum circuits. This may result in the coolant leaking into the vacuum circuit leading to an electrochemical reaction, increasing the…

    Volltext

    The vacuum-controlled coolant pump may not be tightly sealed between the coolant and vacuum circuits. This may result in the coolant leaking into the vacuum circuit leading to an electrochemical reaction, increasing the risk of fire.

    A12/00045/22 ↗
  • EU Safety Gate2020

    The electrical connector of the side-impact sensors might not be correctly latched and could become detached.This would lead to delayed activation of the restraint systems in the event of a side impact, reducing their…

    Volltext

    The electrical connector of the side-impact sensors might not be correctly latched and could become detached.This would lead to delayed activation of the restraint systems in the event of a side impact, reducing their restraining effect and increasing the risk of injury to the vehicle occupants.

    A12/01361/21 ↗
1 weitere Rückrufe anzeigen
  • EU Safety GateErnst2018–2020

    Due to the lack of documentation, there is no confirmation that the screw connections of the turbocharger’s oil-supply and oil-return pipes were correctly executed during the assembly process. In the event of a loose…

    Volltext

    Due to the lack of documentation, there is no confirmation that the screw connections of the turbocharger’s oil-supply and oil-return pipes were correctly executed during the assembly process. In the event of a loose screw connection, oil might leak at the oil-supply and/or oil-return pipe of the turbocharger.The leaking oil might then come into contact with hot components, increasing the risk of fire.

    A12/01336/20 ↗