Mercedes-Benz CLS 2017: reliability
1,505 MOT tests of Mercedes-Benz CLS cars first registered in 2017: 9.4% failed for a mechanical defect; the class median at the same age and mileage is 7.0%.
- Mechanical failure rate
- 9.4%
- Class median, same age and mileage
- 7.0%
- Failed MOT (any reason)
- 20.3%
- MOT tests
- 1,505
- Recalls
- 10
What fails, by mileage
| Mileage | Tests | Mechanical fail | Class median |
|---|---|---|---|
| 0-50k km | 162 | 7.4% | 3.9% |
| 50-100k km | 723 | 7.8% | 6.2% |
| 100-150k km | 455 | 11.9% | 8.6% |
| 150k+ km | 165 | 11.5% | 9.1% |
What fails on this year
Official recalls
Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.
The electrical connector of the transmission wiring harness may not have been correctly processed. This can lead to water entering the connector, which could cause short circuit and can create a thermal overload of the…
A12/01979/24 ↗Full text
The electrical connector of the transmission wiring harness may not have been correctly processed. This can lead to water entering the connector, which could cause short circuit and can create a thermal overload of the connector when the vehicle is parked, causing the risk of fire.
The aluminium bolts of the steering box may break. This can lead to detachment of the steering box from the power block, creating a risk of an accident.
A12/00185/23 ↗The seal for the special plug-in contact of the gearbox designed to protect against contact with moisture and splashing water is improperly installed. Thus splashed water can enter the socket contact when driving in wet…
A12/01237/22 ↗Full text
The seal for the special plug-in contact of the gearbox designed to protect against contact with moisture and splashing water is improperly installed. Thus splashed water can enter the socket contact when driving in wet conditions and can lead to a short circuit, increasing the risk of a fire.
A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine compartment. Consequently, leaking fuel may come into contact with hot parts of the…
A12/00017/22 ↗Full text
A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine compartment. Consequently, leaking fuel may come into contact with hot parts of the engine, increasing the risk of fire.
The vacuum-controlled coolant pump may not be tightly sealed between the coolant and vacuum circuits. This may result in the coolant leaking into the vacuum circuit leading to an electrochemical reaction, increasing the…
A12/00045/22 ↗Full text
The vacuum-controlled coolant pump may not be tightly sealed between the coolant and vacuum circuits. This may result in the coolant leaking into the vacuum circuit leading to an electrochemical reaction, increasing the risk of fire.
Moisture can penetrate into the busbar, giving rise to conductive contacts between the individual lines inside it. The resulting current flows could overheat the plastic material of the busbar, increasing the risk of…
A12/00618/20 ↗
Show 4 more recalls
The riveting of the front seat belt housing covers may be inadequate under low temperatures (below -17.5°C). In the event of an accident, the rivets could fail and release the housing cover. This can result in a loss of…
A12/0783/19 ↗Full text
The riveting of the front seat belt housing covers may be inadequate under low temperatures (below -17.5°C). In the event of an accident, the rivets could fail and release the housing cover. This can result in a loss of the seat belt’s restraining effect, increasing the risk of injury.
In vehicles with rear-wheel drive, a lock nut in the steering gear may be cracked. Consequently, when the steering is placed under high forces it could break, which would block the steering gear and increase the risk of…
A12/0296/19 ↗Full text
In vehicles with rear-wheel drive, a lock nut in the steering gear may be cracked. Consequently, when the steering is placed under high forces it could break, which would block the steering gear and increase the risk of accident.
There may be cracks in a securing nut in the steering gear of rear-wheel-drive vehicles. The nut could consequently break if the steering system is subject to a very high lateral force, which could result in rotating…
A12/0164/19 ↗Full text
There may be cracks in a securing nut in the steering gear of rear-wheel-drive vehicles. The nut could consequently break if the steering system is subject to a very high lateral force, which could result in rotating parts in the steering gear affecting the casing and thereby blocking the steering system.
The calibration of the occupant classification system for the passenger seat does not work correctly. If a child seat is installed on the passenger seat, the airbag might not be deactivated and be deployed in the event…
A12/1447/18 ↗Full text
The calibration of the occupant classification system for the passenger seat does not work correctly. If a child seat is installed on the passenger seat, the airbag might not be deactivated and be deployed in the event of an accident.