AutoDefects
English

Mercedes-Benz CLS 2016: reliability

24% more mechanical failures than the class

2,108 MOT tests of Mercedes-Benz CLS cars first registered in 2016: 10.3% failed for a mechanical defect; the class median at the same age and mileage is 8.3%.

Mechanical failure rate
10.3%
Class median, same age and mileage
8.3%
Failed MOT (any reason)
20.8%
MOT tests
2,108
Recalls
9

What fails, by mileage

MileageTestsMechanical failClass median
0-50k km1104.6%3.9%
50-100k km7868.3%7.1%
100-150k km85311.4%9.1%
150k+ km35913.9%10.5%

What fails on this year

SystemMechanical fail
Suspension and wheels4.4%
Brakes3.5%
Engine, exhaust and emissions2.9%
Steering0.1%
Body, chassis and corrosion0.1%
Seat belts and airbags0.4%
Lights and electrics (wear)2.4%
Tyres (wear)10.6%
Wipers and windscreen (wear)1.1%
Other and plates (wear)0.5%

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety GateSerious2010–2016

    The three aluminium screws of the steering box may corrode due to exposure to spray water and aggressive road-grit (salt) used for melting ice. Advanced corrosion could weaken the screws, leading to potential breakage…

    Full text

    The three aluminium screws of the steering box may corrode due to exposure to spray water and aggressive road-grit (salt) used for melting ice. Advanced corrosion could weaken the screws, leading to potential breakage during manoeuvring or parking. If all fixing screws fail, the power-assisted steering could detach, resulting in a loss of power steering and an increased risk of an accident.

    SR/03711/24 ↗
  • EU Safety Gate2010–2017

    The aluminium bolts of the steering box may break. This can lead to detachment of the steering box from the power block, creating a risk of an accident.

    A12/00185/23 ↗
  • EU Safety GateSerious2015–2022

    The seal for the special plug-in contact of the gearbox designed to protect against contact with moisture and splashing water is improperly installed. Thus splashed water can enter the socket contact when driving in wet…

    Full text

    The seal for the special plug-in contact of the gearbox designed to protect against contact with moisture and splashing water is improperly installed. Thus splashed water can enter the socket contact when driving in wet conditions and can lead to a short circuit, increasing the risk of a fire.

    A12/01237/22 ↗
  • EU Safety GateSerious2016–2020

    A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine compartment. Consequently, leaking fuel may come into contact with hot parts of the…

    Full text

    A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine compartment. Consequently, leaking fuel may come into contact with hot parts of the engine, increasing the risk of fire.

    A12/00017/22 ↗
  • EU Safety GateSerious2015–2019

    Moisture can penetrate into the busbar, giving rise to conductive contacts between the individual lines inside it. The resulting current flows could overheat the plastic material of the busbar, increasing the risk of…

    A12/00618/20 ↗
  • EU Safety Gate2014–2018

    In vehicles with rear-wheel drive, a lock nut in the steering gear may be cracked. Consequently, when the steering is placed under high forces it could break, which would block the steering gear and increase the risk of…

    Full text

    In vehicles with rear-wheel drive, a lock nut in the steering gear may be cracked. Consequently, when the steering is placed under high forces it could break, which would block the steering gear and increase the risk of accident.

    A12/0296/19 ↗
Show 3 more recalls
  • EU Safety Gate2014–2018

    There may be cracks in a securing nut in the steering gear of rear-wheel-drive vehicles. The nut could consequently break if the steering system is subject to a very high lateral force, which could result in rotating…

    Full text

    There may be cracks in a securing nut in the steering gear of rear-wheel-drive vehicles. The nut could consequently break if the steering system is subject to a very high lateral force, which could result in rotating parts in the steering gear affecting the casing and thereby blocking the steering system.

    A12/0164/19 ↗
  • EU Safety Gate2016

    null The underbody panelling under the engine compartment may not be properly connected to the front bumper. In the event of a collision with a pedestrian, this would increase the risk of injury to the pedestrian's legs.

    A12/0904/17 ↗
  • EU Safety GateSerious2003–2016

    null Following the update of the control unit coding, the coding parameters of the control unit could be defective. This could give rise to various unplanned reactions in the vehicle: the wrong airbag could be triggered…

    Full text

    null Following the update of the control unit coding, the coding parameters of the control unit could be defective. This could give rise to various unplanned reactions in the vehicle: the wrong airbag could be triggered in the event of an accident, the airbag control unit may not recognise the belt buckle status, the engine control unit could be coded with a false maximum speed or various assistance systems may not function.

    A12/0457/17 ↗