AutoDefects
English

Toyota C-HR 2017: reliability

59% fewer mechanical failures than the class

14,031 MOT tests of Toyota C-HR cars first registered in 2017: 4.7% failed for a mechanical defect; the class median at the same age and mileage is 11.6%.

Mechanical failure rate
4.7%
Class median, same age and mileage
11.6%
Failed MOT (any reason)
17.7%
MOT tests
14,031
Recalls
5

What fails, by mileage

MileageTestsMechanical failClass median
0-50k km1,8841.5%4.6%
50-100k km7,6584.3%10.1%
100-150k km3,4746.6%15.7%
150k+ km1,0157.0%22.0%

What fails on this year

SystemMechanical fail
Suspension and wheels1.3%
Brakes3.2%
Engine, exhaust and emissions0.1%
Steering0.2%
Body, chassis and corrosion0.1%
Seat belts and airbags0.1%
Lights and electrics (wear)5.1%
Tyres (wear)4.7%
Wipers and windscreen (wear)6.8%
Other and plates (wear)0.2%

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety GateSerious2017–2022

    Insufficient pressing of parts in the high pressure fuel pump can cause movement of the cylinder in the fuel pump through which the piston moves. This can create wear between the cylinder and the pump body, resulting in…

    Full text

    Insufficient pressing of parts in the high pressure fuel pump can cause movement of the cylinder in the fuel pump through which the piston moves. This can create wear between the cylinder and the pump body, resulting in increased stress on valves and/or movement valve seat inside the pump body. This increased stress can cause a crack in the weld of the affected valves, which could lead to a fuel leak, increasing the risk of fire.

    A12/02637/23 ↗
  • EU Safety GateSerious2014–2019

    The accessory seat cover kit may not be installed correctly causing the seat covers not to tear as designed in the event of an airbag deployment. As a result, the cover could prevent the seat-mounted side airbag from…

    Full text

    The accessory seat cover kit may not be installed correctly causing the seat covers not to tear as designed in the event of an airbag deployment. As a result, the cover could prevent the seat-mounted side airbag from deploying properly, increasing the risk of injury in the event of a crash.

    A12/1601/19 ↗
  • EU Safety GateSerious2015–2018

    The engine wire harness has a cover attached where it is connected to the hybrid vehicle Power Control Unit. Due to assembly variation, a portion of the wire harness could contact the cover. If dust has accumulated on…

    Full text

    The engine wire harness has a cover attached where it is connected to the hybrid vehicle Power Control Unit. Due to assembly variation, a portion of the wire harness could contact the cover. If dust has accumulated on the wire harness or the cover, vibration during vehicle use may cause the insulation on the wires to wear over time and expose the core wire, causing an electrical short circuit to occur between the damaged wires and generate heat. If sufficient heat is generated, there is an increased risk of fire.

    A12/1327/18 ↗
  • EU Safety Gate2017, 2018

    null A fault with the skid control unit may result in an inability to release the parking brake or prevent the parking brake from being applied.

    A12/1679/17 ↗
  • EU Safety GateSerious2016, 2017

    null Certain portions of the wall of the fuel tank may be too thin. A crack could consequently develop in the wall of the fuel tank causing a leak which could lead to a fire.

    A12/1079/17 ↗