AutoDefects
Español

Toyota C-HR 2017: fiabilidad

59 % menos fallos mecánicos que su clase

14.031 inspecciones MOT de Toyota C-HR matriculados por primera vez en 2017: el 4,7 % no pasó por un defecto mecánico; la mediana de su clase con la misma edad y kilometraje es del 11,6 %.

Tasa de fallo mecánico
4,7%
Mediana de la clase, misma edad y kilometraje
11,6%
No pasó la MOT (cualquier motivo)
17,7%
inspecciones MOT
14.031
Llamadas a revisión
5

Qué falla según el kilometraje

KilometrajeInspeccionesFallo mecánicoMediana de la clase
0-50k km18841,5%4,6%
50-100k km76584,3%10,1%
100-150k km34746,6%15,7%
150k+ km10157,0%22,0%

Qué falla en este año

SistemaFallo mecánico
Suspensión y ruedas1,3%
Frenos3,2%
Motor, escape y emisiones0,1%
Dirección0,2%
Carrocería, bastidor y corrosión0,1%
Cinturones y airbags0,1%
Luces y electricidad (desgaste)5,1%
Neumáticos (desgaste)4,7%
Escobillas y parabrisas (desgaste)6,8%
Otros y matrículas (desgaste)0,2%

Llamadas a revisión oficiales

Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.

  • EU Safety GateGrave2017–2022

    Insufficient pressing of parts in the high pressure fuel pump can cause movement of the cylinder in the fuel pump through which the piston moves. This can create wear between the cylinder and the pump body, resulting in…

    Texto completo

    Insufficient pressing of parts in the high pressure fuel pump can cause movement of the cylinder in the fuel pump through which the piston moves. This can create wear between the cylinder and the pump body, resulting in increased stress on valves and/or movement valve seat inside the pump body. This increased stress can cause a crack in the weld of the affected valves, which could lead to a fuel leak, increasing the risk of fire.

    A12/02637/23 ↗
  • EU Safety GateGrave2014–2019

    The accessory seat cover kit may not be installed correctly causing the seat covers not to tear as designed in the event of an airbag deployment. As a result, the cover could prevent the seat-mounted side airbag from…

    Texto completo

    The accessory seat cover kit may not be installed correctly causing the seat covers not to tear as designed in the event of an airbag deployment. As a result, the cover could prevent the seat-mounted side airbag from deploying properly, increasing the risk of injury in the event of a crash.

    A12/1601/19 ↗
  • EU Safety GateGrave2015–2018

    The engine wire harness has a cover attached where it is connected to the hybrid vehicle Power Control Unit. Due to assembly variation, a portion of the wire harness could contact the cover. If dust has accumulated on…

    Texto completo

    The engine wire harness has a cover attached where it is connected to the hybrid vehicle Power Control Unit. Due to assembly variation, a portion of the wire harness could contact the cover. If dust has accumulated on the wire harness or the cover, vibration during vehicle use may cause the insulation on the wires to wear over time and expose the core wire, causing an electrical short circuit to occur between the damaged wires and generate heat. If sufficient heat is generated, there is an increased risk of fire.

    A12/1327/18 ↗
  • EU Safety Gate2017, 2018

    null A fault with the skid control unit may result in an inability to release the parking brake or prevent the parking brake from being applied.

    A12/1679/17 ↗
  • EU Safety GateGrave2016, 2017

    null Certain portions of the wall of the fuel tank may be too thin. A crack could consequently develop in the wall of the fuel tank causing a leak which could lead to a fire.

    A12/1079/17 ↗