Toyota C-HR 2018: fiabilidad
18.570 inspecciones MOT de Toyota C-HR matriculados por primera vez en 2018: el 2,9 % no pasó por un defecto mecánico; la mediana de su clase con la misma edad y kilometraje es del 7,9 %.
- Tasa de fallo mecánico
- 2,9%
- Mediana de la clase, misma edad y kilometraje
- 7,9%
- No pasó la MOT (cualquier motivo)
- 18,1%
- inspecciones MOT
- 18.570
- Llamadas a revisión
- 6
Qué falla según el kilometraje
| Kilometraje | Inspecciones | Fallo mecánico | Mediana de la clase |
|---|---|---|---|
| 0-50k km | 3613 | 1,4% | 2,9% |
| 50-100k km | 10.597 | 3,0% | 6,9% |
| 100-150k km | 3381 | 4,0% | 13,2% |
| 150k+ km | 979 | 3,8% | 17,8% |
Qué falla en este año
Llamadas a revisión oficiales
Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.
Insufficient pressing of parts in the high pressure fuel pump can cause movement of the cylinder in the fuel pump through which the piston moves. This can create wear between the cylinder and the pump body, resulting in…
A12/02637/23 ↗Texto completo
Insufficient pressing of parts in the high pressure fuel pump can cause movement of the cylinder in the fuel pump through which the piston moves. This can create wear between the cylinder and the pump body, resulting in increased stress on valves and/or movement valve seat inside the pump body. This increased stress can cause a crack in the weld of the affected valves, which could lead to a fuel leak, increasing the risk of fire.
The accessory seat cover kit may not be installed correctly causing the seat covers not to tear as designed in the event of an airbag deployment. As a result, the cover could prevent the seat-mounted side airbag from…
A12/1601/19 ↗Texto completo
The accessory seat cover kit may not be installed correctly causing the seat covers not to tear as designed in the event of an airbag deployment. As a result, the cover could prevent the seat-mounted side airbag from deploying properly, increasing the risk of injury in the event of a crash.
The screws retaining the wheel bearings on the hub port of the rear axle may not have been sufficiently tightened and can become loose. As a consequence, the screws can detach during use of the vehicle. If this occurs…
A12/1631/18 ↗Texto completo
The screws retaining the wheel bearings on the hub port of the rear axle may not have been sufficiently tightened and can become loose. As a consequence, the screws can detach during use of the vehicle. If this occurs during rotation of the wheels, it can damage elements of the braking system on the rear axle, or may cause the wheels to detach.
The engine wire harness has a cover attached where it is connected to the hybrid vehicle Power Control Unit. Due to assembly variation, a portion of the wire harness could contact the cover. If dust has accumulated on…
A12/1327/18 ↗Texto completo
The engine wire harness has a cover attached where it is connected to the hybrid vehicle Power Control Unit. Due to assembly variation, a portion of the wire harness could contact the cover. If dust has accumulated on the wire harness or the cover, vibration during vehicle use may cause the insulation on the wires to wear over time and expose the core wire, causing an electrical short circuit to occur between the damaged wires and generate heat. If sufficient heat is generated, there is an increased risk of fire.
null A fault with the skid control unit may result in an inability to release the parking brake or prevent the parking brake from being applied.
A12/1679/17 ↗The electronic parking brake (EPB) may not operate properly, possibly causing the parking brake not to disengage after it is applied or prevent it from being applied. As such, these vehicles fail to comply with the…
17V717000 ↗Texto completo
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2018 Toyota CH-R vehicles. The electronic parking brake (EPB) may not operate properly, possibly causing the parking brake not to disengage after it is applied or prevent it from being applied. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard FMVSS number 135, "Light Vehicle Brake Systems."