AutoDefects
English

Toyota C-HR 2020: reliability

81% fewer mechanical failures than the class

16,387 MOT tests of Toyota C-HR cars first registered in 2020: 0.7% failed for a mechanical defect; the class median at the same age and mileage is 3.7%.

Mechanical failure rate
0.7%
Class median, same age and mileage
3.7%
Failed MOT (any reason)
11.9%
MOT tests
16,387
Recalls
4

What fails, by mileage

MileageTestsMechanical failClass median
0-50k km8,5550.4%2.2%
50-100k km6,7551.0%5.0%
100-150k km9041.6%7.4%
150k+ km1732.3%4.1%

What fails on this year

SystemMechanical fail
Suspension and wheels0.2%
Brakes0.4%
Engine, exhaust and emissions0.0%
Steering0.0%
Body, chassis and corrosion0.1%
Seat belts and airbags0.1%
Lights and electrics (wear)4.9%
Tyres (wear)3.3%
Wipers and windscreen (wear)4.4%
Other and plates (wear)0.2%

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety GateSerious2017–2022

    Insufficient pressing of parts in the high pressure fuel pump can cause movement of the cylinder in the fuel pump through which the piston moves. This can create wear between the cylinder and the pump body, resulting in…

    Full text

    Insufficient pressing of parts in the high pressure fuel pump can cause movement of the cylinder in the fuel pump through which the piston moves. This can create wear between the cylinder and the pump body, resulting in increased stress on valves and/or movement valve seat inside the pump body. This increased stress can cause a crack in the weld of the affected valves, which could lead to a fuel leak, increasing the risk of fire.

    A12/02637/23 ↗
  • EU Safety Gate2020, 2021

    The radar sensor may malfunction due to a faulty installation. This can result in a failure to detect a vehicle in front through the PCS (pre-collision system), which will not provide warnings or brake assistance and…

    Full text

    The radar sensor may malfunction due to a faulty installation. This can result in a failure to detect a vehicle in front through the PCS (pre-collision system), which will not provide warnings or brake assistance and the vehicle will not show the driver a message or indicator that the PCS is not working. This may increase the risk of an accident.

    A12/00469/22 ↗
  • EU Safety Gate2020

    The front right-hand axle shafts may have been produced with lower material strength. If an affected vehicle is frequently driven under certain conditions where higher torque is applied to the front axle shafts, such as…

    Full text

    The front right-hand axle shafts may have been produced with lower material strength. If an affected vehicle is frequently driven under certain conditions where higher torque is applied to the front axle shafts, such as rapid acceleration when starting, the shaft may break, leading to loss of driving force and increased the risk of an accident.

    A12/01416/20 ↗
  • NHTSA (US)Serious2019, 2020

    The seat belt webbing sensor locking mechanism may not lock as intended.

    Full text

    Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2019-2020 C-HR and 2020 Corolla and Corolla Hybrid vehicles equipped with rear seat belt assemblies with a dual-mode locking mechanism. The seat belt webbing sensor locking mechanism may not lock as intended.

    19V877000 ↗