SEAT / Cupra León 2020: reliability
13,851 MOT tests of SEAT / Cupra León cars first registered in 2020: 5.3% failed for a mechanical defect; the class median at the same age and mileage is 4.5%.
- Mechanical failure rate
- 5.3%
- Class median, same age and mileage
- 4.5%
- Failed MOT (any reason)
- 13.7%
- MOT tests
- 13,851
- Recalls
- 7
What fails, by mileage
| Mileage | Tests | Mechanical fail | Class median |
|---|---|---|---|
| 0-50k km | 6,323 | 3.6% | 2.5% |
| 50-100k km | 6,387 | 6.0% | 5.5% |
| 100-150k km | 881 | 9.5% | 9.5% |
| 150k+ km | 260 | 12.3% | 11.5% |
What fails on this year
Official recalls
Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.
In the event of an accident, there is a risk that the load in the baggage compartment will shoot forwards to the partition grille and cause the bracket to detach from the body, increasing the risk of injury to the…
A12/01327/22 ↗Full text
In the event of an accident, there is a risk that the load in the baggage compartment will shoot forwards to the partition grille and cause the bracket to detach from the body, increasing the risk of injury to the passengers.
In the event of an accident, there is a risk that the load in the baggage compartment will shoot forwards to the partition grille and cause the bracket to detach from the body, increasing the risk of injury to the…
A12/01328/22 ↗Full text
In the event of an accident, there is a risk that the load in the baggage compartment will shoot forwards to the partition grille and cause the bracket to detach from the body, increasing the risk of injury to the passengers.
A faulty fuse can cause an arc flash in the event of a short circuit and cause a fire.
A12/00676/22 ↗In the event of a short circuit, a faulty fuse can cause an arc flash, which could cause fire and lead to an accident.
A12/00697/22 ↗The engine covers installed could detach from their fixings depending on the conditions of use (e.g. very sporty driving, or poor road surfaces) and their age. A loose engine cover could come into contact with the hot…
A12/00608/22 ↗Full text
The engine covers installed could detach from their fixings depending on the conditions of use (e.g. very sporty driving, or poor road surfaces) and their age. A loose engine cover could come into contact with the hot area of the exhaust gas turbocharger, increasing the risk of burns or fire.
During the process of assembling the rear stub axle housing at the supplier’s, it is possible that the attachment screw of the rear right or rear left stub axle housing was not tightened to the required torque. Friction…
A11/00108/21 ↗Full text
During the process of assembling the rear stub axle housing at the supplier’s, it is possible that the attachment screw of the rear right or rear left stub axle housing was not tightened to the required torque. Friction noise may occur in the area of the rear axle during operation, which may be followed by loss of control of the vehicle when the stub axle housing comes loose, increasing the risk of an accident.
Show 1 more recalls
Due to a manufacturing error, seat belt anchorage points for the front seats may be inadequate.This will impair the seat belts' protective effect in the event of a collision or sudden braking, increase the risk of…
A12/01388/21 ↗Full text
Due to a manufacturing error, seat belt anchorage points for the front seats may be inadequate.This will impair the seat belts' protective effect in the event of a collision or sudden braking, increase the risk of injury. The product does not meet the requirements set out in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.