AutoDefects
Español

SEAT / Cupra León 2020: fiabilidad

16 % más fallos mecánicos que su clase

13.851 inspecciones MOT de SEAT / Cupra León matriculados por primera vez en 2020: el 5,3 % no pasó por un defecto mecánico; la mediana de su clase con la misma edad y kilometraje es del 4,5 %.

Tasa de fallo mecánico
5,3%
Mediana de la clase, misma edad y kilometraje
4,5%
No pasó la MOT (cualquier motivo)
13,7%
inspecciones MOT
13.851
Llamadas a revisión
7

Qué falla según el kilometraje

KilometrajeInspeccionesFallo mecánicoMediana de la clase
0-50k km63233,6%2,5%
50-100k km63876,0%5,5%
100-150k km8819,5%9,5%
150k+ km26012,3%11,5%

Qué falla en este año

SistemaFallo mecánico
Suspensión y ruedas2,7%
Frenos1,6%
Motor, escape y emisiones1,0%
Dirección0,1%
Carrocería, bastidor y corrosión0,2%
Cinturones y airbags0,3%
Luces y electricidad (desgaste)2,4%
Neumáticos (desgaste)6,0%
Escobillas y parabrisas (desgaste)2,3%
Otros y matrículas (desgaste)0,2%

Llamadas a revisión oficiales

Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.

  • EU Safety Gate2020–2022

    In the event of an accident, there is a risk that the load in the baggage compartment will shoot forwards to the partition grille and cause the bracket to detach from the body, increasing the risk of injury to the…

    Texto completo

    In the event of an accident, there is a risk that the load in the baggage compartment will shoot forwards to the partition grille and cause the bracket to detach from the body, increasing the risk of injury to the passengers.

    A12/01327/22 ↗
  • EU Safety Gate2020–2022

    In the event of an accident, there is a risk that the load in the baggage compartment will shoot forwards to the partition grille and cause the bracket to detach from the body, increasing the risk of injury to the…

    Texto completo

    In the event of an accident, there is a risk that the load in the baggage compartment will shoot forwards to the partition grille and cause the bracket to detach from the body, increasing the risk of injury to the passengers.

    A12/01328/22 ↗
  • EU Safety GateGrave2020–2022

    A faulty fuse can cause an arc flash in the event of a short circuit and cause a fire.

    A12/00676/22 ↗
  • EU Safety GateGrave2020–2022

    In the event of a short circuit, a faulty fuse can cause an arc flash, which could cause fire and lead to an accident.

    A12/00697/22 ↗
  • EU Safety GateGrave2020–2022

    The engine covers installed could detach from their fixings depending on the conditions of use (e.g. very sporty driving, or poor road surfaces) and their age. A loose engine cover could come into contact with the hot…

    Texto completo

    The engine covers installed could detach from their fixings depending on the conditions of use (e.g. very sporty driving, or poor road surfaces) and their age. A loose engine cover could come into contact with the hot area of the exhaust gas turbocharger, increasing the risk of burns or fire.

    A12/00608/22 ↗
  • EU Safety Gate2020

    During the process of assembling the rear stub axle housing at the supplier’s, it is possible that the attachment screw of the rear right or rear left stub axle housing was not tightened to the required torque. Friction…

    Texto completo

    During the process of assembling the rear stub axle housing at the supplier’s, it is possible that the attachment screw of the rear right or rear left stub axle housing was not tightened to the required torque. Friction noise may occur in the area of the rear axle during operation, which may be followed by loss of control of the vehicle when the stub axle housing comes loose, increasing the risk of an accident.

    A11/00108/21 ↗
Mostrar 1 llamadas más
  • EU Safety GateGrave2020, 2021

    Due to a manufacturing error, seat belt anchorage points for the front seats may be inadequate.This will impair the seat belts' protective effect in the event of a collision or sudden braking, increase the risk of…

    Texto completo

    Due to a manufacturing error, seat belt anchorage points for the front seats may be inadequate.This will impair the seat belts' protective effect in the event of a collision or sudden braking, increase the risk of injury. The product does not meet the requirements set out in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01388/21 ↗