Renault Mégane 2016: reliability
4,867 MOT tests of Renault Mégane cars first registered in 2016: 19.6% failed for a mechanical defect; the class median at the same age and mileage is 12.4%.
- Mechanical failure rate
- 19.6%
- Class median, same age and mileage
- 12.4%
- Failed MOT (any reason)
- 32.3%
- MOT tests
- 4,867
- Recalls
- 7
What fails, by mileage
| Mileage | Tests | Mechanical fail | Class median |
|---|---|---|---|
| 0-50k km | 455 | 6.6% | 6.2% |
| 50-100k km | 1,968 | 16.3% | 9.3% |
| 100-150k km | 1,626 | 23.4% | 15.0% |
| 150k+ km | 818 | 27.4% | 18.1% |
What fails on this year
Official recalls
Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.
null There is an error in the instructions for the procedure for locking the rear doors.
A12/1166/17 ↗null The mixture ratio of the ignition chemicals in the inflators for the window airbags is not correct. This could prevent the window airbags from inflating in the event of an accident.
A12/0765/17 ↗null When the rear door is closed, the child safety lock pre-set to the 'locks activated' position can disengage.
A12/0536/17 ↗null The screw for the right-hand and/or left-hand hub carrier on the rear axle may not have been tightened or tightened incorrectly. This could lead at high mileage to sudden displacement of the wheel.
A12/1664/16 ↗null Damage could occur to the front brake hoses leading to reduced braking performance.
A12/1413/16 ↗null Fixing screws on the rear seat may not be strong enough. The rear seat backrest may consequently detach in the event of a sudden deceleration or impact.
A12/1344/16 ↗
Show 1 more recalls
null The hydraulic unit of the anti-lock braking /electronic stability control system may have been contaminated with plastic or metallic particles during the manufacturing process. This could lead to a decrease in the…
A12/0955/16 ↗Full text
null The hydraulic unit of the anti-lock braking /electronic stability control system may have been contaminated with plastic or metallic particles during the manufacturing process. This could lead to a decrease in the efficiency of the anti-lock braking and/or the electronic stability control.