Renault Mégane 2016: niezawodność
4867 badań MOT egzemplarzy Renault Mégane zarejestrowanych po raz pierwszy w 2016: 19,6% nie przeszło z powodu usterki mechanicznej; mediana klasy w tym samym wieku i z tym samym przebiegiem to 10,4%.
- Usterki mechaniczne
- 19,6%
- Mediana klasy, ten sam wiek i przebieg
- 10,4%
- Negatywne badanie (dowolny powód)
- 32,3%
- badań MOT
- 4867
- Akcje przywoławcze
- 7
Co się psuje w zależności od przebiegu
| Przebieg | Badania | Usterki mechaniczne | Mediana klasy |
|---|---|---|---|
| 0-50k km | 455 | 6,6% | 3,9% |
| 50-100k km | 1968 | 16,3% | 8,4% |
| 100-150k km | 1626 | 23,4% | 11,9% |
| 150k+ km | 818 | 27,4% | 15,7% |
Co się psuje w tym roczniku
Oficjalne akcje przywoławcze
Akcje opublikowane przez NHTSA (USA) i EU Safety Gate, w których wymieniono ten model. Czy dotyczą konkretnego auta, sprawdź po VIN.
null There is an error in the instructions for the procedure for locking the rear doors.
A12/1166/17 ↗null The mixture ratio of the ignition chemicals in the inflators for the window airbags is not correct. This could prevent the window airbags from inflating in the event of an accident.
A12/0765/17 ↗null When the rear door is closed, the child safety lock pre-set to the 'locks activated' position can disengage.
A12/0536/17 ↗null The screw for the right-hand and/or left-hand hub carrier on the rear axle may not have been tightened or tightened incorrectly. This could lead at high mileage to sudden displacement of the wheel.
A12/1664/16 ↗null Damage could occur to the front brake hoses leading to reduced braking performance.
A12/1413/16 ↗null Fixing screws on the rear seat may not be strong enough. The rear seat backrest may consequently detach in the event of a sudden deceleration or impact.
A12/1344/16 ↗
Pokaż jeszcze 1 akcji
null The hydraulic unit of the anti-lock braking /electronic stability control system may have been contaminated with plastic or metallic particles during the manufacturing process. This could lead to a decrease in the…
A12/0955/16 ↗Pełny tekst
null The hydraulic unit of the anti-lock braking /electronic stability control system may have been contaminated with plastic or metallic particles during the manufacturing process. This could lead to a decrease in the efficiency of the anti-lock braking and/or the electronic stability control.