Renault Mégane 2016: Zuverlässigkeit
4.867 MOT-Prüfungen von Renault Mégane mit Erstzulassung 2016: 19,6% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 10,4%.
- Technische Mängelquote
- 19,6%
- Klassenmedian, gleiches Alter und gleiche Laufleistung
- 10,4%
- Durchgefallen (jeder Grund)
- 32,3%
- MOT-Prüfungen
- 4.867
- Rückrufe
- 7
Was nach Laufleistung ausfällt
| Laufleistung | Prüfungen | Technische Mängel | Klassenmedian |
|---|---|---|---|
| 0-50k km | 455 | 6,6% | 3,9% |
| 50-100k km | 1.968 | 16,3% | 8,4% |
| 100-150k km | 1.626 | 23,4% | 11,9% |
| 150k+ km | 818 | 27,4% | 15,7% |
Was bei diesem Baujahr ausfällt
Amtliche Rückrufe
Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.
null There is an error in the instructions for the procedure for locking the rear doors.
A12/1166/17 ↗null The mixture ratio of the ignition chemicals in the inflators for the window airbags is not correct. This could prevent the window airbags from inflating in the event of an accident.
A12/0765/17 ↗null When the rear door is closed, the child safety lock pre-set to the 'locks activated' position can disengage.
A12/0536/17 ↗null The screw for the right-hand and/or left-hand hub carrier on the rear axle may not have been tightened or tightened incorrectly. This could lead at high mileage to sudden displacement of the wheel.
A12/1664/16 ↗null Damage could occur to the front brake hoses leading to reduced braking performance.
A12/1413/16 ↗null Fixing screws on the rear seat may not be strong enough. The rear seat backrest may consequently detach in the event of a sudden deceleration or impact.
A12/1344/16 ↗
1 weitere Rückrufe anzeigen
null The hydraulic unit of the anti-lock braking /electronic stability control system may have been contaminated with plastic or metallic particles during the manufacturing process. This could lead to a decrease in the…
A12/0955/16 ↗Volltext
null The hydraulic unit of the anti-lock braking /electronic stability control system may have been contaminated with plastic or metallic particles during the manufacturing process. This could lead to a decrease in the efficiency of the anti-lock braking and/or the electronic stability control.