AutoDefects
English

Porsche 911 2019: reliability

47% fewer mechanical failures than the class

2,312 MOT tests of Porsche 911 cars first registered in 2019: 0.7% failed for a mechanical defect; the class median at the same age and mileage is 1.3%.

Mechanical failure rate
0.7%
Class median, same age and mileage
1.3%
Failed MOT (any reason)
5.5%
MOT tests
2,312
Recalls
7

What fails, by mileage

MileageTestsMechanical failClass median
0-50k km2,0400.7%1.1%
50-100k km2620.8%2.6%
100-150k km80.0%7.5%
150k+ km20.0%—%

What fails on this year

SystemMechanical fail
Suspension and wheels0.2%
Brakes0.2%
Engine, exhaust and emissions0.2%
Steering0.0%
Body, chassis and corrosion0.0%
Seat belts and airbags0.1%
Lights and electrics (wear)0.7%
Tyres (wear)3.7%
Wipers and windscreen (wear)0.3%
Other and plates (wear)0.4%

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety Gate2018–2021

    A screw connection on the brake booster may be defective.This could affect the use of the service brake, increasing the risk of an accident.

    A12/01364/21 ↗
  • EU Safety Gate2019, 2020

    The screw connections in the undercarriage may be inadequate.This could lead to unstable driving conditions, increasing the risk of an accident.

    A12/00856/21 ↗
  • NHTSA (US)2019

    Porsche Cars North America, Inc. (Porsche) is recalling certain 2019 Porsche 911 Speedster, 2020 Porsche 911 Carrera S Coupe, Carrera 4S Coupe, and Carrera S Cabriolet vehicles. The screw connection on the rear axle…

    Full text

    Porsche Cars North America, Inc. (Porsche) is recalling certain 2019 Porsche 911 Speedster, 2020 Porsche 911 Carrera S Coupe, Carrera 4S Coupe, and Carrera S Cabriolet vehicles. The screw connection on the rear axle upper control arm may be loose.

    21V201000 ↗
  • EU Safety GateSerious2018, 2019

    Due to a manufacturing error, the screw connection between the front-axle transmission and the transmission mounting may loosen.Consequently, the front-axle transmission may move beyond its installed position and damage…

    Full text

    Due to a manufacturing error, the screw connection between the front-axle transmission and the transmission mounting may loosen.Consequently, the front-axle transmission may move beyond its installed position and damage the surrounding components, such as the drive shafts or the fuel tank, which may result in fuel leakage.Fuel leakage close to a source of ignition increases the risk of fire.

    A12/01157/20 ↗
  • EU Safety Gate2019

    Due to a software error in the control device, the hazard warning lights may not function when activated. As a result, the risk of an accident will be increased.

    A12/00217/20 ↗
  • EU Safety Gate2019

    The nuts connecting the driveshaft to the wheel hub may not have been tightened to the required torque. As a result, the driveshaft and the wheel hub may become loose and the wheels could be blocked, increasing the risk…

    Full text

    The nuts connecting the driveshaft to the wheel hub may not have been tightened to the required torque. As a result, the driveshaft and the wheel hub may become loose and the wheels could be blocked, increasing the risk of an accident.

    A12/1240/19 ↗
Show 1 more recalls
  • EU Safety GateSerious2019

    The break section of the airbag cover on the dashboard may be defective. This may lead to insufficient inflation of the airbag in the event of an accident, increasing the risk of injury.

    A12/1219/19 ↗