AutoDefects
Polski

Porsche 911 2019: niezawodność

o 47% mniej usterek mechanicznych niż w klasie

2312 badań MOT egzemplarzy Porsche 911 zarejestrowanych po raz pierwszy w 2019: 0,7% nie przeszło z powodu usterki mechanicznej; mediana klasy w tym samym wieku i z tym samym przebiegiem to 1,3%.

Usterki mechaniczne
0,7%
Mediana klasy, ten sam wiek i przebieg
1,3%
Negatywne badanie (dowolny powód)
5,5%
badań MOT
2312
Akcje przywoławcze
7

Co się psuje w zależności od przebiegu

PrzebiegBadaniaUsterki mechaniczneMediana klasy
0-50k km20400,7%1,1%
50-100k km2620,8%2,6%
100-150k km80,0%7,5%
150k+ km20,0%—%

Co się psuje w tym roczniku

UkładUsterki mechaniczne
Zawieszenie i koła0,2%
Hamulce0,2%
Silnik, wydech i emisja0,2%
Układ kierowniczy0,0%
Nadwozie, podwozie i korozja0,0%
Pasy i poduszki powietrzne0,1%
Oświetlenie i elektryka (eksploatacja)0,7%
Opony (eksploatacja)3,7%
Wycieraczki i szyba (eksploatacja)0,3%
Inne i tablice (eksploatacja)0,4%

Oficjalne akcje przywoławcze

Akcje opublikowane przez NHTSA (USA) i EU Safety Gate, w których wymieniono ten model. Czy dotyczą konkretnego auta, sprawdź po VIN.

  • EU Safety Gate2018–2021

    A screw connection on the brake booster may be defective.This could affect the use of the service brake, increasing the risk of an accident.

    A12/01364/21 ↗
  • EU Safety Gate2019, 2020

    The screw connections in the undercarriage may be inadequate.This could lead to unstable driving conditions, increasing the risk of an accident.

    A12/00856/21 ↗
  • NHTSA (US)2019

    Porsche Cars North America, Inc. (Porsche) is recalling certain 2019 Porsche 911 Speedster, 2020 Porsche 911 Carrera S Coupe, Carrera 4S Coupe, and Carrera S Cabriolet vehicles. The screw connection on the rear axle…

    Pełny tekst

    Porsche Cars North America, Inc. (Porsche) is recalling certain 2019 Porsche 911 Speedster, 2020 Porsche 911 Carrera S Coupe, Carrera 4S Coupe, and Carrera S Cabriolet vehicles. The screw connection on the rear axle upper control arm may be loose.

    21V201000 ↗
  • EU Safety GatePoważne2018, 2019

    Due to a manufacturing error, the screw connection between the front-axle transmission and the transmission mounting may loosen.Consequently, the front-axle transmission may move beyond its installed position and damage…

    Pełny tekst

    Due to a manufacturing error, the screw connection between the front-axle transmission and the transmission mounting may loosen.Consequently, the front-axle transmission may move beyond its installed position and damage the surrounding components, such as the drive shafts or the fuel tank, which may result in fuel leakage.Fuel leakage close to a source of ignition increases the risk of fire.

    A12/01157/20 ↗
  • EU Safety Gate2019

    Due to a software error in the control device, the hazard warning lights may not function when activated. As a result, the risk of an accident will be increased.

    A12/00217/20 ↗
  • EU Safety Gate2019

    The nuts connecting the driveshaft to the wheel hub may not have been tightened to the required torque. As a result, the driveshaft and the wheel hub may become loose and the wheels could be blocked, increasing the risk…

    Pełny tekst

    The nuts connecting the driveshaft to the wheel hub may not have been tightened to the required torque. As a result, the driveshaft and the wheel hub may become loose and the wheels could be blocked, increasing the risk of an accident.

    A12/1240/19 ↗
Pokaż jeszcze 1 akcji
  • EU Safety GatePoważne2019

    The break section of the airbag cover on the dashboard may be defective. This may lead to insufficient inflation of the airbag in the event of an accident, increasing the risk of injury.

    A12/1219/19 ↗