AutoDefects
Deutsch

Porsche 911 2019: Zuverlässigkeit

47% weniger technische Mängel als die Klasse

2.312 MOT-Prüfungen von Porsche 911 mit Erstzulassung 2019: 0,7% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 1,3%.

Technische Mängelquote
0,7%
Klassenmedian, gleiches Alter und gleiche Laufleistung
1,3%
Durchgefallen (jeder Grund)
5,5%
MOT-Prüfungen
2.312
Rückrufe
7

Was nach Laufleistung ausfällt

LaufleistungPrüfungenTechnische MängelKlassenmedian
0-50k km2.0400,7%1,1%
50-100k km2620,8%2,6%
100-150k km80,0%7,5%
150k+ km20,0%—%

Was bei diesem Baujahr ausfällt

BaugruppeTechnische Mängel
Fahrwerk und Räder0,2%
Bremsen0,2%
Motor, Abgasanlage und Emissionen0,2%
Lenkung0,0%
Karosserie, Rahmen und Rost0,0%
Gurte und Airbags0,1%
Licht und Elektrik (Verschleiß)0,7%
Reifen (Verschleiß)3,7%
Wischer und Scheibe (Verschleiß)0,3%
Sonstiges und Kennzeichen (Verschleiß)0,4%

Amtliche Rückrufe

Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.

  • EU Safety Gate2018–2021

    A screw connection on the brake booster may be defective.This could affect the use of the service brake, increasing the risk of an accident.

    A12/01364/21 ↗
  • EU Safety Gate2019, 2020

    The screw connections in the undercarriage may be inadequate.This could lead to unstable driving conditions, increasing the risk of an accident.

    A12/00856/21 ↗
  • NHTSA (US)2019

    Porsche Cars North America, Inc. (Porsche) is recalling certain 2019 Porsche 911 Speedster, 2020 Porsche 911 Carrera S Coupe, Carrera 4S Coupe, and Carrera S Cabriolet vehicles. The screw connection on the rear axle…

    Volltext

    Porsche Cars North America, Inc. (Porsche) is recalling certain 2019 Porsche 911 Speedster, 2020 Porsche 911 Carrera S Coupe, Carrera 4S Coupe, and Carrera S Cabriolet vehicles. The screw connection on the rear axle upper control arm may be loose.

    21V201000 ↗
  • EU Safety GateErnst2018, 2019

    Due to a manufacturing error, the screw connection between the front-axle transmission and the transmission mounting may loosen.Consequently, the front-axle transmission may move beyond its installed position and damage…

    Volltext

    Due to a manufacturing error, the screw connection between the front-axle transmission and the transmission mounting may loosen.Consequently, the front-axle transmission may move beyond its installed position and damage the surrounding components, such as the drive shafts or the fuel tank, which may result in fuel leakage.Fuel leakage close to a source of ignition increases the risk of fire.

    A12/01157/20 ↗
  • EU Safety Gate2019

    Due to a software error in the control device, the hazard warning lights may not function when activated. As a result, the risk of an accident will be increased.

    A12/00217/20 ↗
  • EU Safety Gate2019

    The nuts connecting the driveshaft to the wheel hub may not have been tightened to the required torque. As a result, the driveshaft and the wheel hub may become loose and the wheels could be blocked, increasing the risk…

    Volltext

    The nuts connecting the driveshaft to the wheel hub may not have been tightened to the required torque. As a result, the driveshaft and the wheel hub may become loose and the wheels could be blocked, increasing the risk of an accident.

    A12/1240/19 ↗
1 weitere Rückrufe anzeigen
  • EU Safety GateErnst2019

    The break section of the airbag cover on the dashboard may be defective. This may lead to insufficient inflation of the airbag in the event of an accident, increasing the risk of injury.

    A12/1219/19 ↗