AutoDefects
English

Mercedes-Benz GLE / M-Class 2008: reliability

9% fewer mechanical failures than the class

2,240 MOT tests of Mercedes-Benz GLE / M-Class cars first registered in 2008: 23.0% failed for a mechanical defect; the class median at the same age and mileage is 25.2%.

Mechanical failure rate
23.0%
Class median, same age and mileage
25.2%
Failed MOT (any reason)
33.5%
MOT tests
2,240
Recalls
5

What fails, by mileage

MileageTestsMechanical failClass median
0-50k km70.0%6.6%
50-100k km358.6%16.1%
100-150k km27816.6%19.3%
150k+ km1,92024.3%26.3%

What fails on this year

SystemMechanical fail
Suspension and wheels8.7%
Brakes13.4%
Engine, exhaust and emissions5.0%
Steering1.0%
Body, chassis and corrosion3.8%
Seat belts and airbags1.9%
Lights and electrics (wear)17.1%
Tyres (wear)5.0%
Wipers and windscreen (wear)3.5%
Other and plates (wear)0.6%

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • NHTSA (US)Serious2006–2011

    Please refer to MBUSA's recall report for specific vehicle model details. Moisture may accumulate and cause corrosion in the brake booster housing unit, which can result in reduced brake performance or brake failure.

    Full text

    Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2006-2012 ML, GL, and R-Class vehicles. Please refer to MBUSA's recall report for specific vehicle model details. Moisture may accumulate and cause corrosion in the brake booster housing unit, which can result in reduced brake performance or brake failure.

    24V298000 ↗
  • EU Safety Gate2004–2015

    Severe corrosion may lead to a leakage of the brake booster, thus reducing the braking force, leading to an increase in brake pedal force required to decelerate the vehicle, resulting in a possible increase in stopping…

    Full text

    Severe corrosion may lead to a leakage of the brake booster, thus reducing the braking force, leading to an increase in brake pedal force required to decelerate the vehicle, resulting in a possible increase in stopping distance. Moreover, due to severe corrosion, a particularly strong or severe braking manoeuvre may cause mechanical damage to the brake booster, preventing the vehicle from decelerating through the service brake and thus increasing the risk of an accident.

    A12/00830/22 ↗
  • NHTSA (US)Serious2006–2011

    Please refer to MBUSA's recall report for specific vehicle model details. Moisture may accumulate and cause corrosion in the brake booster housing unit, which can result in reduced brake performance or brake failure.

    Full text

    Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2006-2012 ML-Class, GL-Class, and R-Class vehicles. Please refer to MBUSA's recall report for specific vehicle model details. Moisture may accumulate and cause corrosion in the brake booster housing unit, which can result in reduced brake performance or brake failure.

    22V315000 ↗
  • EU Safety GateSerious2004–2016

    The driver and passenger airbags of the company Takata in vehicles with ammonium nitrate gas generators without drying agents could, under certain climate conditions, lead over time to a chemical change in the fuel.In…

    Full text

    The driver and passenger airbags of the company Takata in vehicles with ammonium nitrate gas generators without drying agents could, under certain climate conditions, lead over time to a chemical change in the fuel.In the event of an accident triggering the release of the driver or passenger airbag, this change could cause the gas generators to burst. If a gas generator ruptures, the airbag would then have no restraining function and loose parts from the gas generator could reach the vehicle interior. This would increase the risk of injury for passengers.

    A12/01236/20 ↗
  • EU Safety GateSerious2003–2016

    null Following the update of the control unit coding, the coding parameters of the control unit could be defective. This could give rise to various unplanned reactions in the vehicle: the wrong airbag could be triggered…

    Full text

    null Following the update of the control unit coding, the coding parameters of the control unit could be defective. This could give rise to various unplanned reactions in the vehicle: the wrong airbag could be triggered in the event of an accident, the airbag control unit may not recognise the belt buckle status, the engine control unit could be coded with a false maximum speed or various assistance systems may not function.

    A12/0457/17 ↗