AutoDefects
Français

Mercedes-Benz GLE / M-Class 2008 : fiabilité

9 % de défaillances mécaniques en moins que la catégorie

2 240 contrôles MOT de Mercedes-Benz GLE / M-Class immatriculées pour la première fois en 2008 : 23,0 % recalées pour un défaut mécanique ; la médiane de la catégorie au même âge et kilométrage est de 25,2 %.

Taux de défaillance mécanique
23,0%
Médiane de la catégorie, même âge et kilométrage
25,2%
Recalés (toute raison)
33,5%
contrôles MOT
2 240
Rappels
5

Ce qui lâche selon le kilométrage

KilométrageContrôlesDéfaillance mécaniqueMédiane catégorie
0-50k km70,0%6,6%
50-100k km358,6%16,1%
100-150k km27816,6%19,3%
150k+ km1 92024,3%26,3%

Ce qui lâche sur cette année

OrganeDéfaillance mécanique
Suspension et roues8,7%
Freins13,4%
Moteur, échappement et émissions5,0%
Direction1,0%
Carrosserie, châssis et corrosion3,8%
Ceintures et airbags1,9%
Éclairage et électricité (usure)17,1%
Pneus (usure)5,0%
Essuie-glaces et pare-brise (usure)3,5%
Divers et plaques (usure)0,6%

Rappels officiels

Rappels publiés par la NHTSA (États-Unis) et l’EU Safety Gate qui citent ce modèle. Vérifiez par VIN si une voiture précise est concernée.

  • NHTSA (US)Grave2006–2011

    Please refer to MBUSA's recall report for specific vehicle model details. Moisture may accumulate and cause corrosion in the brake booster housing unit, which can result in reduced brake performance or brake failure.

    Texte complet

    Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2006-2012 ML, GL, and R-Class vehicles. Please refer to MBUSA's recall report for specific vehicle model details. Moisture may accumulate and cause corrosion in the brake booster housing unit, which can result in reduced brake performance or brake failure.

    24V298000 ↗
  • EU Safety Gate2004–2015

    Severe corrosion may lead to a leakage of the brake booster, thus reducing the braking force, leading to an increase in brake pedal force required to decelerate the vehicle, resulting in a possible increase in stopping…

    Texte complet

    Severe corrosion may lead to a leakage of the brake booster, thus reducing the braking force, leading to an increase in brake pedal force required to decelerate the vehicle, resulting in a possible increase in stopping distance. Moreover, due to severe corrosion, a particularly strong or severe braking manoeuvre may cause mechanical damage to the brake booster, preventing the vehicle from decelerating through the service brake and thus increasing the risk of an accident.

    A12/00830/22 ↗
  • NHTSA (US)Grave2006–2011

    Please refer to MBUSA's recall report for specific vehicle model details. Moisture may accumulate and cause corrosion in the brake booster housing unit, which can result in reduced brake performance or brake failure.

    Texte complet

    Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2006-2012 ML-Class, GL-Class, and R-Class vehicles. Please refer to MBUSA's recall report for specific vehicle model details. Moisture may accumulate and cause corrosion in the brake booster housing unit, which can result in reduced brake performance or brake failure.

    22V315000 ↗
  • EU Safety GateGrave2004–2016

    The driver and passenger airbags of the company Takata in vehicles with ammonium nitrate gas generators without drying agents could, under certain climate conditions, lead over time to a chemical change in the fuel.In…

    Texte complet

    The driver and passenger airbags of the company Takata in vehicles with ammonium nitrate gas generators without drying agents could, under certain climate conditions, lead over time to a chemical change in the fuel.In the event of an accident triggering the release of the driver or passenger airbag, this change could cause the gas generators to burst. If a gas generator ruptures, the airbag would then have no restraining function and loose parts from the gas generator could reach the vehicle interior. This would increase the risk of injury for passengers.

    A12/01236/20 ↗
  • EU Safety GateGrave2003–2016

    null Following the update of the control unit coding, the coding parameters of the control unit could be defective. This could give rise to various unplanned reactions in the vehicle: the wrong airbag could be triggered…

    Texte complet

    null Following the update of the control unit coding, the coding parameters of the control unit could be defective. This could give rise to various unplanned reactions in the vehicle: the wrong airbag could be triggered in the event of an accident, the airbag control unit may not recognise the belt buckle status, the engine control unit could be coded with a false maximum speed or various assistance systems may not function.

    A12/0457/17 ↗