AutoDefects
English

Mercedes-Benz GLE / M-Class 2009: reliability

13% fewer mechanical failures than the class

2,004 MOT tests of Mercedes-Benz GLE / M-Class cars first registered in 2009: 21.2% failed for a mechanical defect; the class median at the same age and mileage is 24.4%.

Mechanical failure rate
21.2%
Class median, same age and mileage
24.4%
Failed MOT (any reason)
34.2%
MOT tests
2,004
Recalls
6

What fails, by mileage

MileageTestsMechanical failClass median
0-50k km616.7%9.9%
50-100k km4910.2%14.7%
100-150k km31016.1%21.6%
150k+ km1,63922.5%25.3%

What fails on this year

SystemMechanical fail
Suspension and wheels7.2%
Brakes12.2%
Engine, exhaust and emissions5.0%
Steering0.6%
Body, chassis and corrosion3.6%
Seat belts and airbags1.3%
Lights and electrics (wear)20.1%
Tyres (wear)6.1%
Wipers and windscreen (wear)2.5%
Other and plates (wear)0.4%

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • NHTSA (US)Serious2006–2011

    Please refer to MBUSA's recall report for specific vehicle model details. Moisture may accumulate and cause corrosion in the brake booster housing unit, which can result in reduced brake performance or brake failure.

    Full text

    Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2006-2012 ML, GL, and R-Class vehicles. Please refer to MBUSA's recall report for specific vehicle model details. Moisture may accumulate and cause corrosion in the brake booster housing unit, which can result in reduced brake performance or brake failure.

    24V298000 ↗
  • EU Safety Gate2004–2015

    Severe corrosion may lead to a leakage of the brake booster, thus reducing the braking force, leading to an increase in brake pedal force required to decelerate the vehicle, resulting in a possible increase in stopping…

    Full text

    Severe corrosion may lead to a leakage of the brake booster, thus reducing the braking force, leading to an increase in brake pedal force required to decelerate the vehicle, resulting in a possible increase in stopping distance. Moreover, due to severe corrosion, a particularly strong or severe braking manoeuvre may cause mechanical damage to the brake booster, preventing the vehicle from decelerating through the service brake and thus increasing the risk of an accident.

    A12/00830/22 ↗
  • NHTSA (US)Serious2006–2011

    Please refer to MBUSA's recall report for specific vehicle model details. Moisture may accumulate and cause corrosion in the brake booster housing unit, which can result in reduced brake performance or brake failure.

    Full text

    Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2006-2012 ML-Class, GL-Class, and R-Class vehicles. Please refer to MBUSA's recall report for specific vehicle model details. Moisture may accumulate and cause corrosion in the brake booster housing unit, which can result in reduced brake performance or brake failure.

    22V315000 ↗
  • EU Safety GateSerious2004–2016

    The driver and passenger airbags of the company Takata in vehicles with ammonium nitrate gas generators without drying agents could, under certain climate conditions, lead over time to a chemical change in the fuel.In…

    Full text

    The driver and passenger airbags of the company Takata in vehicles with ammonium nitrate gas generators without drying agents could, under certain climate conditions, lead over time to a chemical change in the fuel.In the event of an accident triggering the release of the driver or passenger airbag, this change could cause the gas generators to burst. If a gas generator ruptures, the airbag would then have no restraining function and loose parts from the gas generator could reach the vehicle interior. This would increase the risk of injury for passengers.

    A12/01236/20 ↗
  • EU Safety GateSerious2003–2016

    null Following the update of the control unit coding, the coding parameters of the control unit could be defective. This could give rise to various unplanned reactions in the vehicle: the wrong airbag could be triggered…

    Full text

    null Following the update of the control unit coding, the coding parameters of the control unit could be defective. This could give rise to various unplanned reactions in the vehicle: the wrong airbag could be triggered in the event of an accident, the airbag control unit may not recognise the belt buckle status, the engine control unit could be coded with a false maximum speed or various assistance systems may not function.

    A12/0457/17 ↗
  • NHTSA (US)Serious2009–2011

    Mercedes-Benz USA, LLC. (MBUSA) is recalling certain model year 2009-2010 ML320 BlueTec 4Matic, GL320 BlueTec 4Matic and R320 CDI 4Matic, 2011 E350 Cabriolet and E550 Cabriolet, 2009-2011 ML350, ML350 4Matic, ML550…

    Full text

    Mercedes-Benz USA, LLC. (MBUSA) is recalling certain model year 2009-2010 ML320 BlueTec 4Matic, GL320 BlueTec 4Matic and R320 CDI 4Matic, 2011 E350 Cabriolet and E550 Cabriolet, 2009-2011 ML350, ML350 4Matic, ML550 4Matic, ML63 AMG, and C63 AMG, 2010-2011 ML450 4Matic Hybrid, E350 Coupe, E350 4Matic, E550 Coupe, E550 4Matic, and E63 AMG, 2011-2012 GL350 BlueTec 4Matic and R350 BlueTec 4Matic, 2009-2012 GL450 4Matic, GL550 4Matic and R350 4Matic, 2007-2008 SLK280, SLK350, and SLK55 AMG, 2011-2014 SLS AMG Coupe, 2012 SLS AMG Cabriolet, 2013-2014 SLS AMG GT and SLS AMG GT Cabriolet, 2005 C230 Kompressor and C320, 2006-2007 C230, 2006-2011 C350, 2008-2011 C300 and C300 4Matic, 2010-2012 GLK350 and GLK350 4Matic and 2007-2008 Chrysler Crossfire vehicles. Upon deployment of the driver's frontal air bag, excessive internal pressure may cause the inflator to rupture.

    16V081000 ↗