AutoDefects
English

Ford S-MAX / Galaxy 2018: reliability

29% fewer mechanical failures than the class

5,989 MOT tests of Ford S-MAX / Galaxy cars first registered in 2018: 7.4% failed for a mechanical defect; the class median at the same age and mileage is 10.5%.

Mechanical failure rate
7.4%
Class median, same age and mileage
10.5%
Failed MOT (any reason)
20.7%
MOT tests
5,989
Recalls
6

What fails, by mileage

MileageTestsMechanical failClass median
0-50k km6454.7%4.7%
50-100k km2,6117.3%9.2%
100-150k km1,1857.9%13.4%
150k+ km1,5488.5%12.8%

What fails on this year

SystemMechanical fail
Suspension and wheels0.9%
Brakes4.8%
Engine, exhaust and emissions0.9%
Steering0.1%
Body, chassis and corrosion0.3%
Seat belts and airbags1.1%
Lights and electrics (wear)7.4%
Tyres (wear)7.2%
Wipers and windscreen (wear)4.1%
Other and plates (wear)0.3%

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety Gate2014–2024

    The diesel particulate filter (DPF) may be cracked on 2.0 l EcoBlue Diesel and 1.5 l EcoBlue vehicles. This could cause the vehicles to fail the legally required roadworthiness test, as exhaust emissions of soot may be…

    Full text

    The diesel particulate filter (DPF) may be cracked on 2.0 l EcoBlue Diesel and 1.5 l EcoBlue vehicles. This could cause the vehicles to fail the legally required roadworthiness test, as exhaust emissions of soot may be above the authorised limit.

    SR/02468/26 ↗
  • EU Safety Gate2015–2020

    The original control arm bolts on the rear suspension are prone to corrosion, which may cause them to fail. As a result, the steering control of the vehicle will be impaired, increasing the risk of an accident.

    A12/00273/21 ↗
  • EU Safety GateSerious2014–2019

    Potential leakage of battery acid around the battery negative terminal could cause the battery monitoring sensor to fail. Over time growth of copper sulphate may accumulate. This, in turn, could provide a conductive…

    Full text

    Potential leakage of battery acid around the battery negative terminal could cause the battery monitoring sensor to fail. Over time growth of copper sulphate may accumulate. This, in turn, could provide a conductive layer underneath the Battery Monitoring Sensor, creating a low resistance to ground. The increased current flow, due to low resistance, could cause the surrounding material to heat up to a point where it ignites, resulting in a fire.

    A12/1222/19 ↗
  • EU Safety Gate2016–2018

    The clutch pressure plate may break. This may result in reduced vehicle performance.

    A12/0028/19 ↗
  • EU Safety Gate2014–2018

    The air conditioning clutch pulley plate could become loose. This plate could therefore detach and fall onto the road surface, posing a risk of accident.

    A12/1331/18 ↗
  • EU Safety Gate2014–2018

    The clutch pressure plate may break. If this happens while the vehicle is in motion, propulsion may be lost.

    A12/0963/18 ↗