Ford S-MAX / Galaxy 2017: reliability
10,597 MOT tests of Ford S-MAX / Galaxy cars first registered in 2017: 8.0% failed for a mechanical defect; the class median at the same age and mileage is 12.8%.
- Mechanical failure rate
- 8.0%
- Class median, same age and mileage
- 12.8%
- Failed MOT (any reason)
- 20.4%
- MOT tests
- 10,597
- Recalls
- 7
What fails, by mileage
| Mileage | Tests | Mechanical fail | Class median |
|---|---|---|---|
| 0-50k km | 527 | 4.2% | 5.6% |
| 50-100k km | 4,079 | 6.6% | 10.7% |
| 100-150k km | 3,586 | 9.0% | 13.1% |
| 150k+ km | 2,405 | 9.7% | 17.6% |
What fails on this year
Official recalls
Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.
The diesel particulate filter (DPF) may be cracked on 2.0 l EcoBlue Diesel and 1.5 l EcoBlue vehicles. This could cause the vehicles to fail the legally required roadworthiness test, as exhaust emissions of soot may be…
SR/02468/26 ↗Full text
The diesel particulate filter (DPF) may be cracked on 2.0 l EcoBlue Diesel and 1.5 l EcoBlue vehicles. This could cause the vehicles to fail the legally required roadworthiness test, as exhaust emissions of soot may be above the authorised limit.
The original control arm bolts on the rear suspension are prone to corrosion, which may cause them to fail. As a result, the steering control of the vehicle will be impaired, increasing the risk of an accident.
A12/00273/21 ↗The ammonium nitrate propellant used in the airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and…
A12/01240/20 ↗Full text
The ammonium nitrate propellant used in the airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, it may underinflate or the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants.
Potential leakage of battery acid around the battery negative terminal could cause the battery monitoring sensor to fail. Over time growth of copper sulphate may accumulate. This, in turn, could provide a conductive…
A12/1222/19 ↗Full text
Potential leakage of battery acid around the battery negative terminal could cause the battery monitoring sensor to fail. Over time growth of copper sulphate may accumulate. This, in turn, could provide a conductive layer underneath the Battery Monitoring Sensor, creating a low resistance to ground. The increased current flow, due to low resistance, could cause the surrounding material to heat up to a point where it ignites, resulting in a fire.
The clutch pressure plate may break. This may result in reduced vehicle performance.
A12/0028/19 ↗The air conditioning clutch pulley plate could become loose. This plate could therefore detach and fall onto the road surface, posing a risk of accident.
A12/1331/18 ↗
Show 1 more recalls
The clutch pressure plate may break. If this happens while the vehicle is in motion, propulsion may be lost.
A12/0963/18 ↗