AutoDefects
English

Citroën C5 / C5 X 2021: reliability

20% more mechanical failures than the class

986 MOT tests of Citroën C5 / C5 X cars first registered in 2021: 3.3% failed for a mechanical defect; the class median at the same age and mileage is 2.7%.

Mechanical failure rate
3.3%
Class median, same age and mileage
2.7%
Failed MOT (any reason)
12.0%
MOT tests
986
Recalls
6

What fails, by mileage

MileageTestsMechanical failClass median
0-50k km7151.4%2.1%
50-100k km2567.4%4.2%
100-150k km1323.1%7.8%
150k+ km20.0%14.2%

What fails on this year

SystemMechanical fail
Suspension and wheels0.2%
Brakes2.5%
Engine, exhaust and emissions0.2%
Steering0.0%
Body, chassis and corrosion0.3%
Seat belts and airbags0.1%
Lights and electrics (wear)2.8%
Tyres (wear)6.5%
Wipers and windscreen (wear)0.9%
Other and plates (wear)0.1%

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety GateSerious2020, 2021

    The vehicle may have a faulty high-voltage battery, which could cause overheating and cause the battery or vehicle to catch fire.

    SR/03303/25 ↗
  • EU Safety Gate2015–2024

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…

    Full text

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.

    SR/03151/25 ↗
  • EU Safety Gate2017–2023

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…

    Full text

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.

    SR/02655/25 ↗
  • EU Safety GateSerious2020, 2021

    The software in the battery management control unit cannot detect certain failure modes in the battery In the vehicles concerned there may be a defect in the high-voltage battery, which could lead to overheating. This…

    Full text

    The software in the battery management control unit cannot detect certain failure modes in the battery In the vehicles concerned there may be a defect in the high-voltage battery, which could lead to overheating. This increases the risk of fire in the vehicle.

    A12/01706/24 ↗
  • EU Safety Gate2019–2022

    A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.

    A12/01876/23 ↗
  • EU Safety Gate2017–2022

    The diesel particle filter may overheat and develop cracks. This could have a negative impact on the environment.

    A12/00270/23 ↗