Mid-size saloons and estates
Citroën C5 / C5 X reliability
In 20,830 UK MOT tests, 15.2% of Citroën C5 / C5 X cars failed for a mechanical or structural defect. The median mid-size saloon/estate of the same age and mileage: 13.1%.
- Best years
- —
- Years with most failures
- 2010, 2011, 2020
- Weak spot at high mileage
- Body, chassis and corrosion, Suspension and wheels, Steering
- Official recalls
- 23 recalls, 10 serious
- Mechanical failure rate
- 15.2%
- Class median, same age and mileage
- 13.1%
- MOT tests
- 20,830
- US owner complaints
- 0
MOT results by test year
The whole fleet of this model at each year’s MOT, against its class at the same age and mileage. Shows whether the model keeps its standing as it ages.
| MOT year | Tests | Mechanical fail | Class median | Any fail |
|---|---|---|---|---|
| 2024 | 20,830 | 15.2% | 13.1% | 26.3% |
| 2023 | 21,981 | 16.1% | 13.9% | 27.3% |
Failure rate by year of first registration
Mechanical failure rate at the 2024 MOT, by the year the car was first registered, against the median of its class at the same age and mileage.
| Year | Tests | Mechanical fail | Class median | Any fail | Recalls |
|---|---|---|---|---|---|
| 2021 | 986 | 3.3% | 2.7% | 12.0% | 6 |
| 2020 | 5,202 | 5.0% | 4.0% | 14.5% | 9 |
| 2019 | 6,617 | 5.9% | 4.8% | 18.5% | 7 |
| 2016 | 103 | 17.5% | 10.0% | 32.0% | 3 |
| 2015 | 186 | 14.5% | 12.5% | 29.6% | 3 |
| 2014 | 235 | 23.4% | 17.0% | 33.2% | 3 |
| 2013 | 359 | 23.4% | 19.4% | 38.7% | 4 |
| 2012 | 372 | 24.7% | 21.7% | 33.6% | 3 |
| 2011 | 572 | 27.3% | 21.9% | 38.1% | 0 |
| 2010 | 1,163 | 31.3% | 25.3% | 43.4% | 0 |
| 2009 | 1,719 | 32.8% | 28.3% | 44.0% | 0 |
| 2008 | 1,153 | 34.1% | 31.5% | 45.1% | 0 |
| 2007 | 424 | 34.9% | 30.5% | 47.4% | 0 |
| 2006 | 421 | 32.1% | 32.5% | 43.7% | 0 |
| 2005 | 298 | 31.2% | 31.9% | 43.6% | 0 |
| 2004 | 354 | 32.2% | 32.2% | 43.2% | 0 |
What fails, by mileage
Share of MOT tests that failed on each system. Wear items (bulbs, tyres, wipers, plates) are excluded from the reliability score.
(…) = Class median, same age and mileage
Pre-purchase checklist for the mechanic
Built from the systems where this model fails more often than its class at 100,000 km and above, and from open recalls.
- Body and chassis: inspect sills, subframes, jacking points and the floor for corrosion and previous repairs.
- Suspension and wheels: check arms, bushes, ball joints, springs and shock absorbers for play, cracks and leaks; look for uneven tyre wear.
- Steering: check for play in the rack, track rod ends and column, power-steering leaks and noise on full lock.
- Recalls: 5 serious recalls name this model — ask for proof the work was done
- SR/01382/26 · 2026 · Due to a defect in the engine control unit (inverter) in vehicles equipped with electrified dual-clutch transmission (e-DCT), metal…
- SR/00368/26 · 2025 · Vehicles fitted with a DV5R engine may experience a fuel leak. The non-conformity of the round shape on the cone of the common rail may…
- SR/02935/25 · 2022–2025 · The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may…
- SR/03303/25 · 2020, 2021 · The vehicle may have a faulty high-voltage battery, which could cause overheating and cause the battery or vehicle to catch fire.
- SR/00426/25 · 2023, 2024 · Due to a weakness in the crimping interface of the quick coupling connector fitted to the high-pressure fuel pump, a leak may occur in the…
Check a specific car by its VIN on the official sites: NHTSA (US) · DVSA (UK)
Official recalls
Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.
Due to a defect in the engine control unit (inverter) in vehicles equipped with electrified dual-clutch transmission (e-DCT), metal soldering residues may pass into the unit. This can cause internal electric short…
SR/01382/26 ↗Full text
Due to a defect in the engine control unit (inverter) in vehicles equipped with electrified dual-clutch transmission (e-DCT), metal soldering residues may pass into the unit. This can cause internal electric short circuits which, can lead to continuous power supply and overheating due to a blocked relay, and cause a fire.
Vehicles fitted with a DV5R engine may experience a fuel leak. The non-conformity of the round shape on the cone of the common rail may cause the nut to loosen, resulting in the possibility of fuel leaking between the…
SR/00368/26 ↗Full text
Vehicles fitted with a DV5R engine may experience a fuel leak. The non-conformity of the round shape on the cone of the common rail may cause the nut to loosen, resulting in the possibility of fuel leaking between the nut and the thread, leading to fuel vapours and fuel flow into the hot exhaust system. This may lead to a fire under the bonnet.
The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may cause a fire in the vehicle.
SR/02935/25 ↗Due to incorrect coding in the Built-in Systems Interface, the Stop&Start function is inoperative, which may result in increased CO2 emissions.
SR/03583/25 ↗The vehicle may have a faulty high-voltage battery, which could cause overheating and cause the battery or vehicle to catch fire.
SR/03303/25 ↗The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…
SR/03151/25 ↗Full text
The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.
Show 17 more recalls
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…
SR/02655/25 ↗Full text
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.
Due to a weakness in the crimping interface of the quick coupling connector fitted to the high-pressure fuel pump, a leak may occur in the fuel pipe within the engine compartment. This can result in the vehicle catching…
SR/00426/25 ↗The software in the battery management control unit cannot detect certain failure modes in the battery In the vehicles concerned there may be a defect in the high-voltage battery, which could lead to overheating. This…
A12/01706/24 ↗Full text
The software in the battery management control unit cannot detect certain failure modes in the battery In the vehicles concerned there may be a defect in the high-voltage battery, which could lead to overheating. This increases the risk of fire in the vehicle.
A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.
A12/01876/23 ↗The safety function (charge pin temperature sensor) of the charging cable may fail and not prevent the cable from overheating, creating a risk of fire.
A12/01623/23 ↗The diesel particle filter may overheat and develop cracks. This could have a negative impact on the environment.
A12/00270/23 ↗The software in the calculator, used only in after-sales operations and for a limited period (October 2020 to January 2021), was incorrect. This may lead to Nitrogen Oxides (NOx) emissions above the regulatory limits.…
A12/00103/22 ↗Full text
The software in the calculator, used only in after-sales operations and for a limited period (October 2020 to January 2021), was incorrect. This may lead to Nitrogen Oxides (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to the environment.
The ventilation hole of the passenger side airbag is too small, which may result in insufficient deployment of the airbag in the event of activation. Furthermore, the AR suspension arm screws may be lost due to…
A12/01044/21 ↗Full text
The ventilation hole of the passenger side airbag is too small, which may result in insufficient deployment of the airbag in the event of activation. Furthermore, the AR suspension arm screws may be lost due to defective heat treatment and the nuts on the anti-roll bar bearings could break due to excessive tightening torque applied. This may impair the control over the vehicle, increasing the risk of an accident.
The welding of the tow bar may be faulty. As a result, the trailer coupling could break, increasing the risk of an accident.
A12/00645/21 ↗The trailer hitch may be defective.As a result the trailer may become detached inadvertently, increasing the risk of an accident.
A12/00411/21 ↗The high-pressure pump has not been tightened to the engine with the correct torque. As a result, fuel may leak onto the road, posing a risk to the following traffic.
A12/01463/20 ↗The two bolts attaching the trailer hitch can break.Consequently, the trailer will become detached, increasing the risk of an accident.
A12/00383/20 ↗Overheating of the engine may occur due to a problem with the engine control software. Overheating of the engine may lead to engine failure.
A12/0492/18 ↗null The power terminal on the starter is incorrectly positioned which could result in the electric starter cable being in contact with the exhaust gas recirculation valve. This could lead to wear of the insulation of…
A12/0997/17 ↗Full text
null The power terminal on the starter is incorrectly positioned which could result in the electric starter cable being in contact with the exhaust gas recirculation valve. This could lead to wear of the insulation of the electric starter cable and the risk of a short-circuit occurring.
null The driver's airbag may not deploy properly in the event of an accident due to the possible failure of one of its components.
A12/1011/16 ↗null In the case of negative exterior temperatures, and after repeated activation of the fuel heater, an electric connection on the cover of the fuel heater can overheat. This can cause the cover to melt, allowing air…
A12/1484/15 ↗Full text
null In the case of negative exterior temperatures, and after repeated activation of the fuel heater, an electric connection on the cover of the fuel heater can overheat. This can cause the cover to melt, allowing air to enter the fuel system which could lead to stalling of the engine and loss of control of the car.
null A faulty connection between the fuel lines and the diesel injectors may cause a leakage of diesel which then accumulates in the hollows at the base of the cylinder head. When these hollows are full, fuel might…
A12/1985/13 ↗Full text
null A faulty connection between the fuel lines and the diesel injectors may cause a leakage of diesel which then accumulates in the hollows at the base of the cylinder head. When these hollows are full, fuel might spill over onto the surfaces of the exhaust system, resulting in a fire hazard.