AutoDefects
English

Citroën C5 / C5 X 2015: reliability

16% more mechanical failures than the class

186 MOT tests of Citroën C5 / C5 X cars first registered in 2015: 14.5% failed for a mechanical defect; the class median at the same age and mileage is 12.5%.

Mechanical failure rate
14.5%
Class median, same age and mileage
12.5%
Failed MOT (any reason)
29.6%
MOT tests
186
Recalls
3

What fails, by mileage

MileageTestsMechanical failClass median
0-50k km140.0%3.4%
50-100k km659.2%8.2%
100-150k km5815.5%14.2%
150k+ km4924.5%18.7%

What fails on this year

SystemMechanical fail
Suspension and wheels4.3%
Brakes2.7%
Engine, exhaust and emissions2.2%
Steering0.0%
Body, chassis and corrosion6.5%
Seat belts and airbags0.0%
Lights and electrics (wear)14.0%
Tyres (wear)6.5%
Wipers and windscreen (wear)2.2%
Other and plates (wear)0.5%

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety Gate2015–2024

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…

    Full text

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.

    SR/03151/25 ↗
  • EU Safety Gate2012–2015

    Overheating of the engine may occur due to a problem with the engine control software. Overheating of the engine may lead to engine failure.

    A12/0492/18 ↗
  • EU Safety Gate2013–2017

    null The power terminal on the starter is incorrectly positioned which could result in the electric starter cable being in contact with the exhaust gas recirculation valve. This could lead to wear of the insulation of…

    Full text

    null The power terminal on the starter is incorrectly positioned which could result in the electric starter cable being in contact with the exhaust gas recirculation valve. This could lead to wear of the insulation of the electric starter cable and the risk of a short-circuit occurring.

    A12/0997/17 ↗