AutoDefects
English

BMW X6 2020: reliability

5% fewer mechanical failures than the class

1,058 MOT tests of BMW X6 cars first registered in 2020: 3.2% failed for a mechanical defect; the class median at the same age and mileage is 3.4%.

Mechanical failure rate
3.2%
Class median, same age and mileage
3.4%
Failed MOT (any reason)
13.3%
MOT tests
1,058
Recalls
22

What fails, by mileage

MileageTestsMechanical failClass median
0-50k km4312.3%2.5%
50-100k km5553.8%3.9%
100-150k km644.7%5.1%
150k+ km80.0%6.6%

What fails on this year

SystemMechanical fail
Suspension and wheels1.0%
Brakes0.9%
Engine, exhaust and emissions1.0%
Steering0.0%
Body, chassis and corrosion0.1%
Seat belts and airbags0.5%
Lights and electrics (wear)1.5%
Tyres (wear)8.9%
Wipers and windscreen (wear)1.6%
Other and plates (wear)1.0%

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety GateSerious2020–2026

    The RSW22 starter with reinforced water tightness (RWT) may experience increased abrasion of the magnetic contact, causing deposits to build up at the lowest point inside the relay. These deposits may increase relay…

    Full text

    The RSW22 starter with reinforced water tightness (RWT) may experience increased abrasion of the magnetic contact, causing deposits to build up at the lowest point inside the relay. These deposits may increase relay contact resistance, leading to starting failures or short circuits. If a short circuit occurs, either when attempting to start the vehicle or while driving due to vibration-related movement of the deposits, it could cause a thermal event and increase the risk of fire.

    SR/02180/26 ↗
  • EU Safety GateSerious2020–2024

    The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn…

    Full text

    The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire.

    SR/00568/26 ↗
  • EU Safety GateSerious2015–2021

    Water may come into contact with the starter relay and gradually cause corrosion. This could affect the electrical connection inside the relay and make the engine difficult to start. It may also result in a short…

    Full text

    Water may come into contact with the starter relay and gradually cause corrosion. This could affect the electrical connection inside the relay and make the engine difficult to start. It may also result in a short circuit and could cause the starter to overheat leading to a fire when the vehicle is in motion or when it is parked with the ignition off.

    SR/03830/25 ↗
  • EU Safety GateSerious2018–2025

    The engine starter’s electrical contacts may overheat and cause the vehicle to start improperly. Continued starting attempts can intensify the overheating and ignite surrounding components, potentially leading to a…

    Full text

    The engine starter’s electrical contacts may overheat and cause the vehicle to start improperly. Continued starting attempts can intensify the overheating and ignite surrounding components, potentially leading to a vehicle fire while driving or shortly after parking.

    SR/03823/25 ↗
  • NHTSA (US)Serious2020

    After repeated attempts, the starter motor may overheat from an electrical overload.

    Full text

    BMW of North America, LLC (BMW) is recalling certain 2020 340I, X6, 2020-2025 840I, 2020-2022 740LI, 2019-2020 X7, and X5 vehicles. After repeated attempts, the starter motor may overheat from an electrical overload.

    25V644000 ↗
  • EU Safety GateSerious2018–2020

    The software-based overload protection function cannot sufficiently prevent the starter being overloaded in the event of repeated long start-up attempts. The starter may overheat or sparks may be produced as a result of…

    Full text

    The software-based overload protection function cannot sufficiently prevent the starter being overloaded in the event of repeated long start-up attempts. The starter may overheat or sparks may be produced as a result of an increased current flow. This increases the risk of a fire.

    A12/02466/24 ↗
Show 9 more recalls
  • NHTSA (US)Serious2020

    Please see the recall report for the complete list of models. In the event the starter motor fails, repeated attempts to start the vehicle can cause the starter motor to overheat from an electrical overload.

    Full text

    BMW of North America, LLC is recalling certain 2019-2020 X5, X7, 2020 3 Series Sedan, X6, 2020-2021 7 Series Sedan, 2020 8 Series Convertible, 8 Series Coupe, and 2020 8 Series Gran Coupe vehicles. Please see the recall report for the complete list of models. In the event the starter motor fails, repeated attempts to start the vehicle can cause the starter motor to overheat from an electrical overload.

    24V576000 ↗
  • NHTSA (US)2020–2022

    The roof function control unit may be programmed incorrectly, allowing the sunroof to close without the key fob present inside the vehicle. As such, these vehicles fail to comply with the requirements of Federal Motor…

    Full text

    BMW of North America, LLC (BMW) is recalling certain 2022 4 Series Gran Coupe (430i, 430i xDrive, M440i xDrive); 2019-2022 X5 sDrive40i, X5 xDrive40i, X5 xDrive50i, X5 M50i, X5M; 2021-2022 X5 xdrive45e; 2020-2022 X6 sDrive40i, X6 xDrive40i, X6 xDrive50i, X6M and 2019-2023 X7 xDrive40i, X7 xDrive50i, X7 M50i, X7 xDrive60i, X7 M60i, X7M, Alpina XB7 vehicles. The roof function control unit may be programmed incorrectly, allowing the sunroof to close without the key fob present inside the vehicle. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 118, "Power-Operated Window Systems."

    22V267000 ↗
  • EU Safety Gate2018–2021

    Defective hydraulic unit of the braking system may cause a limited braking support and increased braking distance. Moreover, in such cases the ABS system would not be available. This will lead to increased risk of an…

    Full text

    Defective hydraulic unit of the braking system may cause a limited braking support and increased braking distance. Moreover, in such cases the ABS system would not be available. This will lead to increased risk of an accident.

    A12/00590/21 ↗
  • EU Safety Gate2020

    The steering spindle may not have been properly bolted and could become detached.As a result the steering control would be lost, increasing the risk of an accident.

    A12/00307/21 ↗
  • NHTSA (US)2020, 2021

    When shifting into Reverse, a small portion of the rearview image may be obscured, or the screen may not illuminate. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard…

    Full text

    BMW of North America, LLC (BMW) is recalling certain 2019-2021 X3 sDrive30i, X3 xDrive30i, X3 M40i, X3M, X4 xDrive30i, X4 M40i, M550i, X4M, X5 sDrive40i, X5 xDrive40i, X5 xDrive50i, X5M, X5 M50i, X7 xDrive40i, X7 xDrive50i, X7 M50i, Alpina XB7, 330i, 330i xDrive, M340i, M340i xDrive, and 8 Series Coupe, Convertible and Grand Coupe, 840i, 840i xDrive, M850i xDrive, M8, 2020-2021 530e, 530e xDrive, 330e, 330e xDrive, 745Le, 745Le xDrive, X5 xDrive45e, X3 xDrive30e, X6 sDrive40i, X6 xDrive40i, X6 xDrive50i, X6 M50i, X6M, 530i, 530i xDrive, 540i, 540i xDrive, M550i xDrive, M5, 740i, 740Li, 740Li xDrive, M760i Drive, M760Li xDrive, 750Li xDrive Alpina, Alpina B7 xDrive, and 2021 4 Series Coupe 430i, 430i xDrive, M440i xDrive vehicles. When shifting into Reverse, a small portion of the rearview image may be obscured, or the screen may not illuminate. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."

    21V096000 ↗
  • NHTSA (US)2020, 2021

    The rotor and shaft within the integrated brake system may not have been welded properly and could separate during a hard braking event, possibly resulting in a loss of the Antilock Brake System (ABS) and braking…

    Full text

    BMW of North America, LLC (BMW) is recalling certain 2020-2021 8 Series Coupe, Grand Coupe and convertible 840i, 840i xDrive, M850i xDrive, M8 and 740 Li, 740 Li xDrive, 750 Li xDrive, M760 Li xDrive, X6 sDrive40i, X6 xDrive40i, X6 xdrive50i, X6 M50i, X6M, and 2019-2021 X5 sDrive40i, X5 xDrive40i, X5 xDrive50i, X5 M50i, X5M, X7 xDrive40i, X7 xDrive50i, X7 M50i, and 2021 M3, M3 Competition, M4 Coupe, M4 Competition Coupe, X5 xDrive45e, 745 Le xDrive. The rotor and shaft within the integrated brake system may not have been welded properly and could separate during a hard braking event, possibly resulting in a loss of the Antilock Brake System (ABS) and braking assistance.

    21V062000 ↗
  • EU Safety Gate2020

    The tyres on the affected vehicles may not have been manufactured according to the specifications. Consequently, sudden loss of pressure and partial or complete tread separation may occur while driving, increasing the…

    Full text

    The tyres on the affected vehicles may not have been manufactured according to the specifications. Consequently, sudden loss of pressure and partial or complete tread separation may occur while driving, increasing the risk of an accident.

    A12/00099/21 ↗
  • EU Safety Gate2020

    The upper rear (roof) spoiler may not have been properly attached during the production process. This may cause the spoiler to become detached, posing a risk to the following traffic.

    A12/00031/21 ↗
  • EU Safety Gate2020

    Due to defective welding, the push bars on the front axle beam may become detached.Moreover, a failure of the welding quality may result in a crack of the bearing bracket. This could lead to loss of wheel control,…

    Full text

    Due to defective welding, the push bars on the front axle beam may become detached.Moreover, a failure of the welding quality may result in a crack of the bearing bracket. This could lead to loss of wheel control, increasing the risk of an accident.

    A12/01855/20 ↗