AutoDefects
English

BMW X6 2015: reliability

47% fewer mechanical failures than the class

1,259 MOT tests of BMW X6 cars first registered in 2015: 6.4% failed for a mechanical defect; the class median at the same age and mileage is 12.0%.

Mechanical failure rate
6.4%
Class median, same age and mileage
12.0%
Failed MOT (any reason)
14.1%
MOT tests
1,259
Recalls
7

What fails, by mileage

MileageTestsMechanical failClass median
0-50k km250.0%3.6%
50-100k km2684.5%8.8%
100-150k km5985.9%12.4%
150k+ km3689.2%14.3%

What fails on this year

SystemMechanical fail
Suspension and wheels3.9%
Brakes1.8%
Engine, exhaust and emissions0.8%
Steering0.3%
Body, chassis and corrosion0.6%
Seat belts and airbags0.2%
Lights and electrics (wear)1.4%
Tyres (wear)6.5%
Wipers and windscreen (wear)1.4%
Other and plates (wear)1.2%

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety GateSerious2003–2018

    The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants.

    A12/02573/24 ↗
  • EU Safety GateSerious2015–2021

    Water may come into contact with the starter relay and gradually cause corrosion. This could affect the electrical connection inside the relay and make the engine difficult to start. It may also result in a short…

    Full text

    Water may come into contact with the starter relay and gradually cause corrosion. This could affect the electrical connection inside the relay and make the engine difficult to start. It may also result in a short circuit and could cause the starter to overheat leading to a fire when the vehicle is in motion or when it is parked with the ignition off.

    SR/03830/25 ↗
  • EU Safety GateSerious2012–2015

    The airbag propellant may deteriorate over time, and If deployed, excessive internal pressure may cause the inflator body to burst and metal fragments could pass through the cushion material causing injury to occupants.

    A12/00783/23 ↗
  • EU Safety GateSerious2015

    The airbag may deteriorate over time, and if deployed, excessive internal pressure may cause the inflator body to burst and metal fragments could pass through the cushion material causing injury to occupants.

    A12/00868/23 ↗
  • EU Safety Gate2013–2019

    The four ISOFIX child-seat attachment brackets on the rear seats may not have the necessary structural durability. As a result, one or more of the brackets could break under increased fatigue loading during operation.…

    Full text

    The four ISOFIX child-seat attachment brackets on the rear seats may not have the necessary structural durability. As a result, one or more of the brackets could break under increased fatigue loading during operation. This may increase the risk of injury in the event of an accident.

    A12/00042/20 ↗
  • NHTSA (US)2015–2019

    BMW of North America, LLC. (BMW) is recalling certain 2015-2019 X6 sDrive35i, X6 xDrive35i, X6 xDrive50i, and X6M vehicles equipped with rear seat lower anchor bars used in securing child restraint seats. The lower…

    Full text

    BMW of North America, LLC. (BMW) is recalling certain 2015-2019 X6 sDrive35i, X6 xDrive35i, X6 xDrive50i, and X6M vehicles equipped with rear seat lower anchor bars used in securing child restraint seats. The lower anchor bars may become damaged over time when used with an ISOFIX-type, rigid-style connector, child restraint system.

    19V823000 ↗
Show 1 more recalls
  • EU Safety GateSerious2011–2016

    null The control unit of the electronic power steering may have been incorrectly manufactured. This may cause a fire even when the vehicle is parked. Furthermore, steering assistance might fail while driving.

    A12/1587/16 ↗