AutoDefects
English

BMW X6 2018: reliability

10% fewer mechanical failures than the class

2,095 MOT tests of BMW X6 cars first registered in 2018: 5.6% failed for a mechanical defect; the class median at the same age and mileage is 6.2%.

Mechanical failure rate
5.6%
Class median, same age and mileage
6.2%
Failed MOT (any reason)
14.2%
MOT tests
2,095
Recalls
11

What fails, by mileage

MileageTestsMechanical failClass median
0-50k km2102.9%3.5%
50-100k km1,2504.3%5.7%
100-150k km5539.0%7.9%
150k+ km828.5%9.4%

What fails on this year

SystemMechanical fail
Suspension and wheels1.9%
Brakes1.1%
Engine, exhaust and emissions2.6%
Steering0.0%
Body, chassis and corrosion0.1%
Seat belts and airbags0.3%
Lights and electrics (wear)1.7%
Tyres (wear)6.5%
Wipers and windscreen (wear)2.2%
Other and plates (wear)0.8%

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety GateSerious2003–2018

    The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants.

    A12/02573/24 ↗
  • EU Safety GateSerious2015–2021

    Water may come into contact with the starter relay and gradually cause corrosion. This could affect the electrical connection inside the relay and make the engine difficult to start. It may also result in a short…

    Full text

    Water may come into contact with the starter relay and gradually cause corrosion. This could affect the electrical connection inside the relay and make the engine difficult to start. It may also result in a short circuit and could cause the starter to overheat leading to a fire when the vehicle is in motion or when it is parked with the ignition off.

    SR/03830/25 ↗
  • EU Safety GateSerious2018–2025

    The engine starter’s electrical contacts may overheat and cause the vehicle to start improperly. Continued starting attempts can intensify the overheating and ignite surrounding components, potentially leading to a…

    Full text

    The engine starter’s electrical contacts may overheat and cause the vehicle to start improperly. Continued starting attempts can intensify the overheating and ignite surrounding components, potentially leading to a vehicle fire while driving or shortly after parking.

    SR/03823/25 ↗
  • EU Safety GateSerious2018–2020

    The software-based overload protection function cannot sufficiently prevent the starter being overloaded in the event of repeated long start-up attempts. The starter may overheat or sparks may be produced as a result of…

    Full text

    The software-based overload protection function cannot sufficiently prevent the starter being overloaded in the event of repeated long start-up attempts. The starter may overheat or sparks may be produced as a result of an increased current flow. This increases the risk of a fire.

    A12/02466/24 ↗
  • EU Safety Gate2018–2021

    Defective hydraulic unit of the braking system may cause a limited braking support and increased braking distance. Moreover, in such cases the ABS system would not be available. This will lead to increased risk of an…

    Full text

    Defective hydraulic unit of the braking system may cause a limited braking support and increased braking distance. Moreover, in such cases the ABS system would not be available. This will lead to increased risk of an accident.

    A12/00590/21 ↗
  • EU Safety Gate2013–2019

    The four ISOFIX child-seat attachment brackets on the rear seats may not have the necessary structural durability. As a result, one or more of the brackets could break under increased fatigue loading during operation.…

    Full text

    The four ISOFIX child-seat attachment brackets on the rear seats may not have the necessary structural durability. As a result, one or more of the brackets could break under increased fatigue loading during operation. This may increase the risk of injury in the event of an accident.

    A12/00042/20 ↗
Show 5 more recalls
  • NHTSA (US)2015–2019

    BMW of North America, LLC. (BMW) is recalling certain 2015-2019 X6 sDrive35i, X6 xDrive35i, X6 xDrive50i, and X6M vehicles equipped with rear seat lower anchor bars used in securing child restraint seats. The lower…

    Full text

    BMW of North America, LLC. (BMW) is recalling certain 2015-2019 X6 sDrive35i, X6 xDrive35i, X6 xDrive50i, and X6M vehicles equipped with rear seat lower anchor bars used in securing child restraint seats. The lower anchor bars may become damaged over time when used with an ISOFIX-type, rigid-style connector, child restraint system.

    19V823000 ↗
  • NHTSA (US)2018, 2019

    The wheel bolts on these vehicles may not have been properly tightened.

    Full text

    BMW of North America, LLC (BMW) is recalling certain 2018-2019 BMW X6 sDrive35i, X6 xDrive35i, X6 xDrive50i, and X6M vehicles. The wheel bolts on these vehicles may not have been properly tightened.

    18V614000 ↗
  • EU Safety Gate2018

    The ball stud of the left wishbone (control arm) on the front axle is inadequate. As a consequence, it could break and lead to impaired steering.

    A12/1182/18 ↗
  • NHTSA (US)2018

    The pivot bolt on the front lower-left control arm may not have been properly hardened, which may cause the control arm to break.

    Full text

    BMW of North America, LLC (BMW) is recalling certain 2018 BMW X5 xDrive35i, X5 xDrive50i, X5 xDrive35d, and X6 sDrive35i vehicles. The pivot bolt on the front lower-left control arm may not have been properly hardened, which may cause the control arm to break.

    18V439000 ↗
  • NHTSA (US)2018

    Bolts that secure the front suspension may not have been properly tightened.

    Full text

    BMW of North America, LLC (BMW) is recalling certain 2018 BMW X5 SAV, X5 M SAV, X6 SAV, and X6 M SAV vehicles. Bolts that secure the front suspension may not have been properly tightened.

    17V727000 ↗