AutoDefects
Polski

Volvo V40 2018: niezawodność

o 75% więcej usterek mechanicznych niż w klasie

12 927 badań MOT egzemplarzy Volvo V40 zarejestrowanych po raz pierwszy w 2018: 11,4% nie przeszło z powodu usterki mechanicznej; mediana klasy w tym samym wieku i z tym samym przebiegiem to 6,5%.

Usterki mechaniczne
11,4%
Mediana klasy, ten sam wiek i przebieg
6,5%
Negatywne badanie (dowolny powód)
20,2%
badań MOT
12 927
Akcje przywoławcze
3

Co się psuje w zależności od przebiegu

PrzebiegBadaniaUsterki mechaniczneMediana klasy
0-50k km31917,6%3,6%
50-100k km726911,8%7,0%
100-150k km205614,4%8,9%
150k+ km41118,3%9,8%

Co się psuje w tym roczniku

UkładUsterki mechaniczne
Zawieszenie i koła7,7%
Hamulce3,2%
Silnik, wydech i emisja0,7%
Układ kierowniczy0,1%
Nadwozie, podwozie i korozja0,6%
Pasy i poduszki powietrzne0,2%
Oświetlenie i elektryka (eksploatacja)2,1%
Opony (eksploatacja)8,2%
Wycieraczki i szyba (eksploatacja)2,1%
Inne i tablice (eksploatacja)0,2%

Oficjalne akcje przywoławcze

Akcje opublikowane przez NHTSA (USA) i EU Safety Gate, w których wymieniono ten model. Czy dotyczą konkretnego auta, sprawdź po VIN.

  • EU Safety GatePoważne2014–2018

    Air bubbles may remain in the engine cooling system when filling coolant. This can cause insufficient cooling and damage the engine, increasing the risk of fire in the engine compartment.

    A12/01063/20 ↗
  • EU Safety GatePoważne2016–2019

    Due to an excessive build-up of carbon deposits in the intake system, the plastic engine intake manifold may melt and deform. As a result, a localized engine bay fire may occur.

    A12/1953/19 ↗
  • EU Safety GatePoważne2012–2019

    Excessive carbon deposits could build up in the intake system of the engine. Additionally, the intake valve could leak. Consequently, the temperature of the intake air could rise, causing the engine intake manifold to…

    Pełny tekst

    Excessive carbon deposits could build up in the intake system of the engine. Additionally, the intake valve could leak. Consequently, the temperature of the intake air could rise, causing the engine intake manifold to melt and deform. This could lead to the engine to stop increasing the risk of accidents or even the engine bay to catch fire.

    A12/1597/19 ↗