AutoDefects
Deutsch

Volvo V40 2018: Zuverlässigkeit

123% mehr technische Mängel als die Klasse

12.927 MOT-Prüfungen von Volvo V40 mit Erstzulassung 2018: 11,4% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 5,1%.

Technische Mängelquote
11,4%
Klassenmedian, gleiches Alter und gleiche Laufleistung
5,1%
Durchgefallen (jeder Grund)
20,2%
MOT-Prüfungen
12.927
Rückrufe
3

Was nach Laufleistung ausfällt

LaufleistungPrüfungenTechnische MängelKlassenmedian
0-50k km3.1917,6%2,7%
50-100k km7.26911,8%5,1%
100-150k km2.05614,4%7,7%
150k+ km41118,3%9,8%

Was bei diesem Baujahr ausfällt

BaugruppeTechnische Mängel
Fahrwerk und Räder7,7%
Bremsen3,2%
Motor, Abgasanlage und Emissionen0,7%
Lenkung0,1%
Karosserie, Rahmen und Rost0,6%
Gurte und Airbags0,2%
Licht und Elektrik (Verschleiß)2,1%
Reifen (Verschleiß)8,2%
Wischer und Scheibe (Verschleiß)2,1%
Sonstiges und Kennzeichen (Verschleiß)0,2%

Amtliche Rückrufe

Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.

  • EU Safety GateErnst2014–2018

    Air bubbles may remain in the engine cooling system when filling coolant. This can cause insufficient cooling and damage the engine, increasing the risk of fire in the engine compartment.

    A12/01063/20 ↗
  • EU Safety GateErnst2016–2019

    Due to an excessive build-up of carbon deposits in the intake system, the plastic engine intake manifold may melt and deform. As a result, a localized engine bay fire may occur.

    A12/1953/19 ↗
  • EU Safety GateErnst2012–2019

    Excessive carbon deposits could build up in the intake system of the engine. Additionally, the intake valve could leak. Consequently, the temperature of the intake air could rise, causing the engine intake manifold to…

    Volltext

    Excessive carbon deposits could build up in the intake system of the engine. Additionally, the intake valve could leak. Consequently, the temperature of the intake air could rise, causing the engine intake manifold to melt and deform. This could lead to the engine to stop increasing the risk of accidents or even the engine bay to catch fire.

    A12/1597/19 ↗