Volvo V40 2017: niezawodność
13 526 badań MOT egzemplarzy Volvo V40 zarejestrowanych po raz pierwszy w 2017: 13,2% nie przeszło z powodu usterki mechanicznej; mediana klasy w tym samym wieku i z tym samym przebiegiem to 8,5%.
- Usterki mechaniczne
- 13,2%
- Mediana klasy, ten sam wiek i przebieg
- 8,5%
- Negatywne badanie (dowolny powód)
- 21,9%
- badań MOT
- 13 526
- Akcje przywoławcze
- 8
Co się psuje w zależności od przebiegu
| Przebieg | Badania | Usterki mechaniczne | Mediana klasy |
|---|---|---|---|
| 0-50k km | 1853 | 8,2% | 3,7% |
| 50-100k km | 6791 | 13,3% | 7,8% |
| 100-150k km | 3770 | 14,5% | 10,9% |
| 150k+ km | 1112 | 17,3% | 12,7% |
Co się psuje w tym roczniku
Oficjalne akcje przywoławcze
Akcje opublikowane przez NHTSA (USA) i EU Safety Gate, w których wymieniono ten model. Czy dotyczą konkretnego auta, sprawdź po VIN.
Air bubbles may remain in the engine cooling system when filling coolant. This can cause insufficient cooling and damage the engine, increasing the risk of fire in the engine compartment.
A12/01063/20 ↗Air bubbles may remain in the engine's cooling system after filling with coolant.Consequently, the cooling of the engine might be impaired, causing the engine to overheat, leading to its damage or even to fire.
A12/01056/20 ↗Excessive carbon deposits could build up in the intake system of the engine.Consequently, the temperature of the intake air could rise, causing the engine's intake manifold to melt and deform. This could lead to the…
A12/00538/20 ↗Pełny tekst
Excessive carbon deposits could build up in the intake system of the engine.Consequently, the temperature of the intake air could rise, causing the engine's intake manifold to melt and deform. This could lead to the engine to stall, increasing the risk of accidents or even the engine bay to catch fire.
Excessive carbon deposits could build up in the intake system of the engine.Consequently, the temperature of the intake air could rise, causing the engine's intake manifold to melt and deform. This could lead to the…
A12/00539/20 ↗Pełny tekst
Excessive carbon deposits could build up in the intake system of the engine.Consequently, the temperature of the intake air could rise, causing the engine's intake manifold to melt and deform. This could lead to the engine to stall, increasing the risk of accidents or even the engine bay to catch fire.
Excessive carbon deposits could build up in the intake system of the engine.Additionally, the intake valve could leak.Consequently, the temperature of the intake air could rise, causing the engine intake manifold to…
A12/00028/19 ↗Pełny tekst
Excessive carbon deposits could build up in the intake system of the engine.Additionally, the intake valve could leak.Consequently, the temperature of the intake air could rise, causing the engine intake manifold to melt and deform. This could lead to the engine to stop increasing the risk of accidents or even the engine bay to catch fire.
Excessive carbon deposits could build up in the intake system of the engine. Consequently, the temperature of the intake air could rise, causing the engine's intake manifold to melt and deform. This could lead to the…
A12/00032/19 ↗Pełny tekst
Excessive carbon deposits could build up in the intake system of the engine. Consequently, the temperature of the intake air could rise, causing the engine's intake manifold to melt and deform. This could lead to the engine to stop, increasing the risk of accidents or even the engine bay to catch fire.
Pokaż jeszcze 2 akcji
Due to an excessive build-up of carbon deposits in the intake system, the plastic engine intake manifold may melt and deform. As a result, a localized engine bay fire may occur.
A12/1953/19 ↗Excessive carbon deposits could build up in the intake system of the engine. Additionally, the intake valve could leak. Consequently, the temperature of the intake air could rise, causing the engine intake manifold to…
A12/1597/19 ↗Pełny tekst
Excessive carbon deposits could build up in the intake system of the engine. Additionally, the intake valve could leak. Consequently, the temperature of the intake air could rise, causing the engine intake manifold to melt and deform. This could lead to the engine to stop increasing the risk of accidents or even the engine bay to catch fire.