Klasa średnia: sedany i kombi
Toyota Avensis — niezawodność
W 63 040 brytyjskich badaniach MOT 20,2% egzemplarzy Toyota Avensis nie przeszło z powodu usterki mechanicznej lub nadwozia. Mediana dla sedana/kombi klasy średniej w tym samym wieku i z tym samym przebiegiem: 25,2%.
- Najlepsze roczniki
- 2012, 2013, 2014
- Roczniki z największą liczbą usterek
- —
- Słaby punkt przy dużym przebiegu
- Nic nie wyróżnia się na tle klasy
- Oficjalne akcje przywoławcze
- 10 akcji, poważnych: 6
- Usterki mechaniczne
- 20,2%
- Mediana klasy, ten sam wiek i przebieg
- 25,2%
- badań MOT
- 63 040
- Skargi właścicieli w USA
- 0
Wyniki badań według roku
Wszystkie egzemplarze modelu na badaniach w danym roku wobec klasy w tym samym wieku i z tym samym przebiegiem. Widać, czy model utrzymuje pozycję z wiekiem.
| Rok badania | Badania | Usterki mechaniczne | Mediana klasy | Wszystkie usterki |
|---|---|---|---|---|
| 2024 | 63 040 | 20,2% | 25,2% | 33,9% |
| 2023 | 71 436 | 19,8% | 24,1% | 33,7% |
Odsetek usterek według roku pierwszej rejestracji
Odsetek usterek mechanicznych na badaniu MOT w 2024 r. według roku pierwszej rejestracji, wobec mediany klasy w tym samym wieku i z tym samym przebiegiem.
| Rok | Badania | Usterki mechaniczne | Mediana klasy | Wszystkie usterki | Akcje |
|---|---|---|---|---|---|
| 2018 | 1153 | 7,5% | 8,8% | 18,1% | 1 |
| 2017 | 2510 | 8,2% | 9,2% | 17,4% | 1 |
| 2016 | 3626 | 9,0% | 11,7% | 19,5% | 3 |
| 2015 | 3234 | 11,4% | 15,2% | 22,7% | 1 |
| 2014 | 3093 | 14,1% | 19,1% | 26,6% | 0 |
| 2013 | 3201 | 15,1% | 20,8% | 28,0% | 1 |
| 2012 | 4857 | 16,5% | 22,3% | 29,9% | 0 |
| 2011 | 4445 | 17,6% | 22,3% | 31,7% | 0 |
| 2010 | 5619 | 21,3% | 25,1% | 34,4% | 0 |
| 2009 | 5255 | 22,3% | 28,0% | 36,6% | 0 |
| 2008 | 5186 | 24,5% | 31,2% | 40,2% | 1 |
| 2007 | 5182 | 25,2% | 31,4% | 41,7% | 1 |
| 2006 | 4680 | 27,4% | 33,1% | 43,1% | 3 |
| 2005 | 3603 | 26,9% | 32,2% | 42,5% | 3 |
| 2004 | 2741 | 25,9% | 32,5% | 41,4% | 3 |
Co się psuje w zależności od przebiegu
Odsetek badań niezaliczonych z powodu danego układu. Elementy eksploatacyjne (żarówki, opony, wycieraczki, tablice) nie wpływają na wskaźnik niezawodności.
(…) = Mediana klasy, ten sam wiek i przebieg
Lista kontrolna dla mechanika przed zakupem
Na podstawie układów, w których ten model psuje się częściej niż jego klasa przy przebiegu od 100 000 km, oraz otwartych akcji przywoławczych.
- Akcje przywoławcze: poważnych akcji dla modelu — 5. Poproś o potwierdzenie wykonania napraw
- A12/01861/22 · 2002–2006 · The density of the propellant in the airbag inflator may be reduced due to high temperature cycling and moisture in the propellant and its…
- A12/00444/21 · 2015–2018 · Due to insufficient durability, the Exhaust Gas Recirculation (EGR) cooler may develop an internal coolant leak which could create…
- A12/1739/18 · 2002–2006 · The airbag control module for the supplemental restraint system (SRS ECU) has been assembled with application-specific integrated circuits…
- A12/0102/17 · 2016 · null The mixing ratio of the fire starter component may be incorrect in some initiators. As a result, the side airbag may not deploy.
- A12/1454/16 · · null In the event that the front passenger air bag is deployed, the gas inflator may rupture projecting metal fragments.
Sprawdź konkretne auto po VIN na oficjalnych stronach: NHTSA (US) · DVSA (UK)
Oficjalne akcje przywoławcze
Akcje opublikowane przez NHTSA (USA) i EU Safety Gate, w których wymieniono ten model. Czy dotyczą konkretnego auta, sprawdź po VIN.
The density of the propellant in the airbag inflator may be reduced due to high temperature cycling and moisture in the propellant and its sealed container. In the event of an accident this can lead to the release of…
A12/01861/22 ↗Pełny tekst
The density of the propellant in the airbag inflator may be reduced due to high temperature cycling and moisture in the propellant and its sealed container. In the event of an accident this can lead to the release of fragments of the front airbag from the generator housing, increasing the risk of injury.
Due to insufficient durability, the Exhaust Gas Recirculation (EGR) cooler may develop an internal coolant leak which could create smouldering deposits inside the EGR cooler and the intake manifold.This may result in…
A12/00444/21 ↗Pełny tekst
Due to insufficient durability, the Exhaust Gas Recirculation (EGR) cooler may develop an internal coolant leak which could create smouldering deposits inside the EGR cooler and the intake manifold.This may result in localised thermal damage in the intake system, which might lead to engine power reduction and to increased risk of fire.
The airbag control module for the supplemental restraint system (SRS ECU) has been assembled with application-specific integrated circuits (ASICs) that are susceptible to internal shorting when exposed to high inductive…
A12/1739/18 ↗Pełny tekst
The airbag control module for the supplemental restraint system (SRS ECU) has been assembled with application-specific integrated circuits (ASICs) that are susceptible to internal shorting when exposed to high inductive electrical noise from various vehicle electrical components. If this occurs, there is a possibility that the ASIC could become damaged, leading to the airbag(s) and/or seat belt pretensioners being deactivated or deploying inadvertently.
There is a possibility that the bolts on the exhaust-side of the turbocharger assembly may not have been correctly tightened due to defective tightening equipment. The bolts could loosen over time, causing insufficient…
A12/1791/17 ↗Pełny tekst
There is a possibility that the bolts on the exhaust-side of the turbocharger assembly may not have been correctly tightened due to defective tightening equipment. The bolts could loosen over time, causing insufficient sealing of the turbocharger and could allow exhaust gas leakage from the turbocharger.
null The mixing ratio of the fire starter component may be incorrect in some initiators. As a result, the side airbag may not deploy.
A12/0102/17 ↗null In the event that the front passenger air bag is deployed, the gas inflator may rupture projecting metal fragments.
A12/1454/16 ↗
Pokaż jeszcze 4 akcji
null Owing to the faulty application of primer, the panorama sunroof may become detached from the frame and fall into the passenger compartment.
A12/1286/15 ↗null The brake hydraulic pressure may not increase sufficiently during harsh braking. This could result in an increased stopping distance.
A12/1820/13 ↗null Due to their insufficient hardness, the splines which connect the intermediate extension shaft of the steering system to the steering gear box may deform, develop increased backlash and eventually wear out, which…
A12/1781/12 ↗Pełny tekst
null Due to their insufficient hardness, the splines which connect the intermediate extension shaft of the steering system to the steering gear box may deform, develop increased backlash and eventually wear out, which could result in a loss of steering ability. This might happen if the steering wheel is frequently and forcefully turned to the full-lock position while driving at slow speed.
null The tow ball in some exceptional cases (under severe stress condition) might develop a crack. This may result in the detachable tow ball fracturing.Fracture of the detachable tow ball could release objects on the…
A12/1454/12 ↗Pełny tekst
null The tow ball in some exceptional cases (under severe stress condition) might develop a crack. This may result in the detachable tow ball fracturing.Fracture of the detachable tow ball could release objects on the road, causing a risk of an accident and injuries to passengers of other cars or pedestrians.