Toyota Avensis 2004: niezawodność
2741 badań MOT egzemplarzy Toyota Avensis zarejestrowanych po raz pierwszy w 2004: 25,9% nie przeszło z powodu usterki mechanicznej; mediana klasy w tym samym wieku i z tym samym przebiegiem to 32,5%.
- Usterki mechaniczne
- 25,9%
- Mediana klasy, ten sam wiek i przebieg
- 32,5%
- Negatywne badanie (dowolny powód)
- 41,4%
- badań MOT
- 2741
- Akcje przywoławcze
- 3
Co się psuje w zależności od przebiegu
| Przebieg | Badania | Usterki mechaniczne | Mediana klasy |
|---|---|---|---|
| 0-50k km | 13 | 0,0% | —% |
| 50-100k km | 177 | 10,7% | 21,9% |
| 100-150k km | 629 | 21,3% | 28,6% |
| 150k+ km | 1922 | 29,0% | 34,8% |
Co się psuje w tym roczniku
Oficjalne akcje przywoławcze
Akcje opublikowane przez NHTSA (USA) i EU Safety Gate, w których wymieniono ten model. Czy dotyczą konkretnego auta, sprawdź po VIN.
The density of the propellant in the airbag inflator may be reduced due to high temperature cycling and moisture in the propellant and its sealed container. In the event of an accident this can lead to the release of…
A12/01861/22 ↗Pełny tekst
The density of the propellant in the airbag inflator may be reduced due to high temperature cycling and moisture in the propellant and its sealed container. In the event of an accident this can lead to the release of fragments of the front airbag from the generator housing, increasing the risk of injury.
The airbag control module for the supplemental restraint system (SRS ECU) has been assembled with application-specific integrated circuits (ASICs) that are susceptible to internal shorting when exposed to high inductive…
A12/1739/18 ↗Pełny tekst
The airbag control module for the supplemental restraint system (SRS ECU) has been assembled with application-specific integrated circuits (ASICs) that are susceptible to internal shorting when exposed to high inductive electrical noise from various vehicle electrical components. If this occurs, there is a possibility that the ASIC could become damaged, leading to the airbag(s) and/or seat belt pretensioners being deactivated or deploying inadvertently.
null The brake hydraulic pressure may not increase sufficiently during harsh braking. This could result in an increased stopping distance.
A12/1820/13 ↗