Mittelklasse: Limousinen und Kombis
Toyota Avensis: Zuverlässigkeit
Bei 63.040 britischen MOT-Prüfungen fielen 20,2% der Toyota Avensis wegen eines technischen oder Karosseriemangels durch. Median eines Mittelklassewagens gleichen Alters und gleicher Laufleistung: 25,2%.
- Beste Baujahre
- 2012, 2013, 2014
- Baujahre mit den meisten Mängeln
- —
- Schwachstelle bei hoher Laufleistung
- Nichts fällt gegenüber der Klasse auf
- Amtliche Rückrufe
- 10 Rückrufe, davon 6 ernst
- Technische Mängelquote
- 20,2%
- Klassenmedian, gleiches Alter und gleiche Laufleistung
- 25,2%
- MOT-Prüfungen
- 63.040
- Beschwerden von US-Haltern
- 0
MOT-Ergebnisse nach Prüfjahr
Alle Fahrzeuge dieses Modells bei der Prüfung des jeweiligen Jahres im Vergleich mit der Klasse bei gleichem Alter und gleicher Laufleistung. Zeigt, ob das Modell mit dem Alter mithält.
| Prüfjahr | Prüfungen | Technische Mängel | Klassenmedian | Alle Mängel |
|---|---|---|---|---|
| 2024 | 63.040 | 20,2% | 25,2% | 33,9% |
| 2023 | 71.436 | 19,8% | 24,1% | 33,7% |
Mängelquote nach Jahr der Erstzulassung
Technische Mängelquote bei der MOT-Prüfung 2024 nach Jahr der Erstzulassung, verglichen mit dem Klassenmedian bei gleichem Alter und gleicher Laufleistung.
| Jahr | Prüfungen | Technische Mängel | Klassenmedian | Alle Mängel | Rückrufe |
|---|---|---|---|---|---|
| 2018 | 1.153 | 7,5% | 8,8% | 18,1% | 1 |
| 2017 | 2.510 | 8,2% | 9,2% | 17,4% | 1 |
| 2016 | 3.626 | 9,0% | 11,7% | 19,5% | 3 |
| 2015 | 3.234 | 11,4% | 15,2% | 22,7% | 1 |
| 2014 | 3.093 | 14,1% | 19,1% | 26,6% | 0 |
| 2013 | 3.201 | 15,1% | 20,8% | 28,0% | 1 |
| 2012 | 4.857 | 16,5% | 22,3% | 29,9% | 0 |
| 2011 | 4.445 | 17,6% | 22,3% | 31,7% | 0 |
| 2010 | 5.619 | 21,3% | 25,1% | 34,4% | 0 |
| 2009 | 5.255 | 22,3% | 28,0% | 36,6% | 0 |
| 2008 | 5.186 | 24,5% | 31,2% | 40,2% | 1 |
| 2007 | 5.182 | 25,2% | 31,4% | 41,7% | 1 |
| 2006 | 4.680 | 27,4% | 33,1% | 43,1% | 3 |
| 2005 | 3.603 | 26,9% | 32,2% | 42,5% | 3 |
| 2004 | 2.741 | 25,9% | 32,5% | 41,4% | 3 |
Häufigste Mängel bei der Prüfung
Die Mängel, die Prüfer bei diesem Modell am häufigsten festgestellt haben, im Originalwortlaut der DVSA (Englisch), je 1.000 Prüfungen.
Was nach Laufleistung ausfällt
Anteil der Prüfungen, die an der jeweiligen Baugruppe scheiterten. Verschleißteile (Lampen, Reifen, Wischer, Kennzeichen) zählen nicht zum Zuverlässigkeitswert.
(…) = Klassenmedian, gleiches Alter und gleiche Laufleistung
Checkliste für die Werkstatt vor dem Kauf
Abgeleitet aus den Baugruppen, bei denen dieses Modell ab 100.000 km häufiger durchfällt als seine Klasse, und aus offenen Rückrufen.
- Rückrufe: 5 ernste Rückrufe betreffen dieses Modell – lassen Sie sich die Erledigung nachweisen
- A12/01861/22 · 2002–2006 · The density of the propellant in the airbag inflator may be reduced due to high temperature cycling and moisture in the propellant and its…
- A12/00444/21 · 2015–2018 · Due to insufficient durability, the Exhaust Gas Recirculation (EGR) cooler may develop an internal coolant leak which could create…
- A12/1739/18 · 2002–2006 · The airbag control module for the supplemental restraint system (SRS ECU) has been assembled with application-specific integrated circuits…
- A12/0102/17 · 2016 · null The mixing ratio of the fire starter component may be incorrect in some initiators. As a result, the side airbag may not deploy.
- A12/1454/16 · · null In the event that the front passenger air bag is deployed, the gas inflator may rupture projecting metal fragments.
Ein bestimmtes Auto per FIN auf den offiziellen Seiten prüfen: NHTSA (US) · DVSA (UK)
Amtliche Rückrufe
Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.
The density of the propellant in the airbag inflator may be reduced due to high temperature cycling and moisture in the propellant and its sealed container. In the event of an accident this can lead to the release of…
A12/01861/22 ↗Volltext
The density of the propellant in the airbag inflator may be reduced due to high temperature cycling and moisture in the propellant and its sealed container. In the event of an accident this can lead to the release of fragments of the front airbag from the generator housing, increasing the risk of injury.
Due to insufficient durability, the Exhaust Gas Recirculation (EGR) cooler may develop an internal coolant leak which could create smouldering deposits inside the EGR cooler and the intake manifold.This may result in…
A12/00444/21 ↗Volltext
Due to insufficient durability, the Exhaust Gas Recirculation (EGR) cooler may develop an internal coolant leak which could create smouldering deposits inside the EGR cooler and the intake manifold.This may result in localised thermal damage in the intake system, which might lead to engine power reduction and to increased risk of fire.
The airbag control module for the supplemental restraint system (SRS ECU) has been assembled with application-specific integrated circuits (ASICs) that are susceptible to internal shorting when exposed to high inductive…
A12/1739/18 ↗Volltext
The airbag control module for the supplemental restraint system (SRS ECU) has been assembled with application-specific integrated circuits (ASICs) that are susceptible to internal shorting when exposed to high inductive electrical noise from various vehicle electrical components. If this occurs, there is a possibility that the ASIC could become damaged, leading to the airbag(s) and/or seat belt pretensioners being deactivated or deploying inadvertently.
There is a possibility that the bolts on the exhaust-side of the turbocharger assembly may not have been correctly tightened due to defective tightening equipment. The bolts could loosen over time, causing insufficient…
A12/1791/17 ↗Volltext
There is a possibility that the bolts on the exhaust-side of the turbocharger assembly may not have been correctly tightened due to defective tightening equipment. The bolts could loosen over time, causing insufficient sealing of the turbocharger and could allow exhaust gas leakage from the turbocharger.
null The mixing ratio of the fire starter component may be incorrect in some initiators. As a result, the side airbag may not deploy.
A12/0102/17 ↗null In the event that the front passenger air bag is deployed, the gas inflator may rupture projecting metal fragments.
A12/1454/16 ↗
4 weitere Rückrufe anzeigen
null Owing to the faulty application of primer, the panorama sunroof may become detached from the frame and fall into the passenger compartment.
A12/1286/15 ↗null The brake hydraulic pressure may not increase sufficiently during harsh braking. This could result in an increased stopping distance.
A12/1820/13 ↗null Due to their insufficient hardness, the splines which connect the intermediate extension shaft of the steering system to the steering gear box may deform, develop increased backlash and eventually wear out, which…
A12/1781/12 ↗Volltext
null Due to their insufficient hardness, the splines which connect the intermediate extension shaft of the steering system to the steering gear box may deform, develop increased backlash and eventually wear out, which could result in a loss of steering ability. This might happen if the steering wheel is frequently and forcefully turned to the full-lock position while driving at slow speed.
null The tow ball in some exceptional cases (under severe stress condition) might develop a crack. This may result in the detachable tow ball fracturing.Fracture of the detachable tow ball could release objects on the…
A12/1454/12 ↗Volltext
null The tow ball in some exceptional cases (under severe stress condition) might develop a crack. This may result in the detachable tow ball fracturing.Fracture of the detachable tow ball could release objects on the road, causing a risk of an accident and injuries to passengers of other cars or pedestrians.