AutoDefects
Deutsch

Toyota Avensis 2016: Zuverlässigkeit

23% weniger technische Mängel als die Klasse

3.626 MOT-Prüfungen von Toyota Avensis mit Erstzulassung 2016: 9,0% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 11,7%.

Technische Mängelquote
9,0%
Klassenmedian, gleiches Alter und gleiche Laufleistung
11,7%
Durchgefallen (jeder Grund)
19,5%
MOT-Prüfungen
3.626
Rückrufe
3

Was nach Laufleistung ausfällt

LaufleistungPrüfungenTechnische MängelKlassenmedian
0-50k km1862,2%3,6%
50-100k km8925,9%8,4%
100-150k km1.0977,2%10,9%
150k+ km1.45113,1%15,4%

Was bei diesem Baujahr ausfällt

BaugruppeTechnische Mängel
Fahrwerk und Räder2,5%
Bremsen4,7%
Motor, Abgasanlage und Emissionen2,3%
Lenkung0,5%
Karosserie, Rahmen und Rost0,7%
Gurte und Airbags0,1%
Licht und Elektrik (Verschleiß)7,0%
Reifen (Verschleiß)5,2%
Wischer und Scheibe (Verschleiß)3,7%
Sonstiges und Kennzeichen (Verschleiß)0,1%

Amtliche Rückrufe

Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.

  • EU Safety GateErnst2015–2018

    Due to insufficient durability, the Exhaust Gas Recirculation (EGR) cooler may develop an internal coolant leak which could create smouldering deposits inside the EGR cooler and the intake manifold.This may result in…

    Volltext

    Due to insufficient durability, the Exhaust Gas Recirculation (EGR) cooler may develop an internal coolant leak which could create smouldering deposits inside the EGR cooler and the intake manifold.This may result in localised thermal damage in the intake system, which might lead to engine power reduction and to increased risk of fire.

    A12/00444/21 ↗
  • EU Safety Gate2016

    There is a possibility that the bolts on the exhaust-side of the turbocharger assembly may not have been correctly tightened due to defective tightening equipment. The bolts could loosen over time, causing insufficient…

    Volltext

    There is a possibility that the bolts on the exhaust-side of the turbocharger assembly may not have been correctly tightened due to defective tightening equipment. The bolts could loosen over time, causing insufficient sealing of the turbocharger and could allow exhaust gas leakage from the turbocharger.

    A12/1791/17 ↗
  • EU Safety GateErnst2016

    null The mixing ratio of the fire starter component may be incorrect in some initiators. As a result, the side airbag may not deploy.

    A12/0102/17 ↗