AutoDefects
Español

Toyota Avensis 2016: fiabilidad

23 % menos fallos mecánicos que su clase

3626 inspecciones MOT de Toyota Avensis matriculados por primera vez en 2016: el 9,0 % no pasó por un defecto mecánico; la mediana de su clase con la misma edad y kilometraje es del 11,7 %.

Tasa de fallo mecánico
9,0%
Mediana de la clase, misma edad y kilometraje
11,7%
No pasó la MOT (cualquier motivo)
19,5%
inspecciones MOT
3626
Llamadas a revisión
3

Qué falla según el kilometraje

KilometrajeInspeccionesFallo mecánicoMediana de la clase
0-50k km1862,2%3,6%
50-100k km8925,9%8,4%
100-150k km10977,2%10,9%
150k+ km145113,1%15,4%

Qué falla en este año

SistemaFallo mecánico
Suspensión y ruedas2,5%
Frenos4,7%
Motor, escape y emisiones2,3%
Dirección0,5%
Carrocería, bastidor y corrosión0,7%
Cinturones y airbags0,1%
Luces y electricidad (desgaste)7,0%
Neumáticos (desgaste)5,2%
Escobillas y parabrisas (desgaste)3,7%
Otros y matrículas (desgaste)0,1%

Llamadas a revisión oficiales

Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.

  • EU Safety GateGrave2015–2018

    Due to insufficient durability, the Exhaust Gas Recirculation (EGR) cooler may develop an internal coolant leak which could create smouldering deposits inside the EGR cooler and the intake manifold.This may result in…

    Texto completo

    Due to insufficient durability, the Exhaust Gas Recirculation (EGR) cooler may develop an internal coolant leak which could create smouldering deposits inside the EGR cooler and the intake manifold.This may result in localised thermal damage in the intake system, which might lead to engine power reduction and to increased risk of fire.

    A12/00444/21 ↗
  • EU Safety Gate2016

    There is a possibility that the bolts on the exhaust-side of the turbocharger assembly may not have been correctly tightened due to defective tightening equipment. The bolts could loosen over time, causing insufficient…

    Texto completo

    There is a possibility that the bolts on the exhaust-side of the turbocharger assembly may not have been correctly tightened due to defective tightening equipment. The bolts could loosen over time, causing insufficient sealing of the turbocharger and could allow exhaust gas leakage from the turbocharger.

    A12/1791/17 ↗
  • EU Safety GateGrave2016

    null The mixing ratio of the fire starter component may be incorrect in some initiators. As a result, the side airbag may not deploy.

    A12/0102/17 ↗