Kompaktowe SUV-y
Peugeot 5008 — niezawodność
W 35 613 brytyjskich badaniach MOT 17,4% egzemplarzy Peugeot 5008 nie przeszło z powodu usterki mechanicznej lub nadwozia. Mediana dla kompaktowego SUV-a w tym samym wieku i z tym samym przebiegiem: 12,9%.
- Najlepsze roczniki
- —
- Roczniki z największą liczbą usterek
- 2017, 2020, 2021
- Słaby punkt przy dużym przebiegu
- Układ kierowniczy, Zawieszenie i koła, Hamulce
- Oficjalne akcje przywoławcze
- 39 akcji, poważnych: 11
- Usterki mechaniczne
- 17,4%
- Mediana klasy, ten sam wiek i przebieg
- 12,9%
- badań MOT
- 35 613
- Skargi właścicieli w USA
- 0
Wyniki badań według roku
Wszystkie egzemplarze modelu na badaniach w danym roku wobec klasy w tym samym wieku i z tym samym przebiegiem. Widać, czy model utrzymuje pozycję z wiekiem.
| Rok badania | Badania | Usterki mechaniczne | Mediana klasy | Wszystkie usterki |
|---|---|---|---|---|
| 2024 | 35 613 | 17,4% | 12,9% | 30,0% |
| 2023 | 31 016 | 17,4% | 13,6% | 31,2% |
Odsetek usterek według roku pierwszej rejestracji
Odsetek usterek mechanicznych na badaniu MOT w 2024 r. według roku pierwszej rejestracji, wobec mediany klasy w tym samym wieku i z tym samym przebiegiem.
| Rok | Badania | Usterki mechaniczne | Mediana klasy | Wszystkie usterki | Akcje |
|---|---|---|---|---|---|
| 2022 | 249 | 6,4% | 2,2% | 11,7% | 6 |
| 2021 | 5595 | 6,5% | 3,7% | 15,6% | 6 |
| 2020 | 4803 | 8,2% | 4,4% | 17,9% | 7 |
| 2019 | 5774 | 9,8% | 6,5% | 19,9% | 10 |
| 2018 | 5086 | 12,9% | 8,3% | 23,2% | 14 |
| 2017 | 755 | 18,5% | 10,5% | 34,0% | 14 |
| 2016 | 1777 | 20,2% | 14,3% | 39,1% | 14 |
| 2015 | 1749 | 23,1% | 17,9% | 41,7% | 11 |
| 2014 | 1708 | 27,8% | 20,9% | 47,4% | 11 |
| 2013 | 2276 | 31,8% | 26,5% | 50,1% | 11 |
| 2012 | 1999 | 34,9% | 28,2% | 50,6% | 10 |
| 2011 | 1784 | 34,5% | 30,9% | 50,0% | 8 |
| 2010 | 2019 | 38,4% | 31,6% | 52,6% | 8 |
Co się psuje w zależności od przebiegu
Odsetek badań niezaliczonych z powodu danego układu. Elementy eksploatacyjne (żarówki, opony, wycieraczki, tablice) nie wpływają na wskaźnik niezawodności.
(…) = Mediana klasy, ten sam wiek i przebieg
Lista kontrolna dla mechanika przed zakupem
Na podstawie układów, w których ten model psuje się częściej niż jego klasa przy przebiegu od 100 000 km, oraz otwartych akcji przywoławczych.
- Układ kierowniczy: sprawdź luzy przekładni, drążków i końcówek, wycieki wspomagania i hałas przy pełnym skręcie.
- Zawieszenie i koła: sprawdź wahacze, tuleje, sworznie, sprężyny i amortyzatory pod kątem luzów, pęknięć i wycieków; zwróć uwagę na nierówne zużycie opon.
- Hamulce: zmierz tarcze i klocki, sprawdź przewody hamulcowe pod kątem korozji, hamulec ręczny i kontrolkę ABS.
- Akcje przywoławcze: poważnych akcji dla modelu — 5. Poproś o potwierdzenie wykonania napraw
- SR/01379/26 · 2008–2026 · Due to a defect of the engine control unit (inverter) in the vehicles fitted with electric double clutch transmission (e-DCT), metallic…
- SR/01314/26 · 2025 · Vehicles may be fitted with cylinder blocks which are missing a cooling nozzle. If a cooling nozzle is missing, the piston may not be…
- SR/02936/25 · 2008–2025 · The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may…
- SR/03373/25 · 2025 · The connection for the auxiliary heating in the 48 V battery harness terminal may not be adequate. This issue could lead to the heating not…
- SR/01778/25 · 2023–2025 · The low-pressure fuel line may touch the screw of the ignition coil. This contact may damage the fuel line and eventually lead to a fuel…
Sprawdź konkretne auto po VIN na oficjalnych stronach: NHTSA (US) · DVSA (UK)
Oficjalne akcje przywoławcze
Akcje opublikowane przez NHTSA (USA) i EU Safety Gate, w których wymieniono ten model. Czy dotyczą konkretnego auta, sprawdź po VIN.
Some vehicles have been registered with class A+ tyres, while the tyres actually fitted are class B. Therefore, the CO₂ emissions declared in the certificate of conformity, which are related to the tyre class, are…
OR/00115/26 ↗Pełny tekst
Some vehicles have been registered with class A+ tyres, while the tyres actually fitted are class B. Therefore, the CO₂ emissions declared in the certificate of conformity, which are related to the tyre class, are incorrect. The tyre class has an impact on rolling resistance and therefore affects CO₂ emissions. Class B tyres generally have a higher rolling resistance than class A+ tyres.
Interior door handles may deactivate when the key is in engine-running mode, which could prevent occupants from exiting the vehicle, potentially leading to injury in the event of an accident.
SR/01735/26 ↗Due to a defect of the engine control unit (inverter) in the vehicles fitted with electric double clutch transmission (e-DCT), metallic soldering residues may cause an internal electric short-circuits. This could lead…
SR/01379/26 ↗Pełny tekst
Due to a defect of the engine control unit (inverter) in the vehicles fitted with electric double clutch transmission (e-DCT), metallic soldering residues may cause an internal electric short-circuits. This could lead to continuous power supply and overheating due to a blocked relay and cause a fire.
Vehicles may be fitted with cylinder blocks which are missing a cooling nozzle. If a cooling nozzle is missing, the piston may not be cooled down sufficiently, potentially causing it to weaken, warp or break. This could…
SR/01314/26 ↗Pełny tekst
Vehicles may be fitted with cylinder blocks which are missing a cooling nozzle. If a cooling nozzle is missing, the piston may not be cooled down sufficiently, potentially causing it to weaken, warp or break. This could lead to sudden engine failure, causing power transmission loss. This could also trigger thermal runaway leading to fire and injuries of the passengers.
The wheel nuts are not securely tightened, which could result in the wheel nut coming loose while the vehicle is in motion, or the loss of a wheel. This could result in an accident and injuries.
SR/00476/26 ↗The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may cause a fire in the vehicle.
SR/02936/25 ↗
Pokaż jeszcze 33 akcji
The fixing screws on the front left and right ball joint mount on the front lower suspension arm may break. This could cause the ball joint mount to pivot and the affected wheel to change direction and hit the mudguard,…
SR/04357/25 ↗Pełny tekst
The fixing screws on the front left and right ball joint mount on the front lower suspension arm may break. This could cause the ball joint mount to pivot and the affected wheel to change direction and hit the mudguard, which may affect the steering capacity of the vehicle and cause an accident.
Due to incorrect coding in the Built-in Systems Interface, the Stop&Start function is inoperative, which may result in increased CO2 emissions.
SR/03887/25 ↗The connection for the auxiliary heating in the 48 V battery harness terminal may not be adequate. This issue could lead to the heating not functioning properly. In rare instances, there is a possibility of an electric…
SR/03373/25 ↗Pełny tekst
The connection for the auxiliary heating in the 48 V battery harness terminal may not be adequate. This issue could lead to the heating not functioning properly. In rare instances, there is a possibility of an electric arc and overheating, which might increase the risk of a fire in the vehicle.
The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…
SR/03153/25 ↗Pełny tekst
The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…
SR/02658/25 ↗Pełny tekst
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.
The low-pressure fuel line may touch the screw of the ignition coil. This contact may damage the fuel line and eventually lead to a fuel leak, which may cause the vehicle to catch fire.
SR/01778/25 ↗The headrests may not stay in the position they have been set in, due to defective lock slots on the headrest supports. In the event of an accident, they can come loose, which can compromise their protective function,…
SR/00884/25 ↗Pełny tekst
The headrests may not stay in the position they have been set in, due to defective lock slots on the headrest supports. In the event of an accident, they can come loose, which can compromise their protective function, increasing the risk of injuries.
Due to a weakness in the crimping interface of the quick coupling connector fitted to the high-pressure fuel pump, a leak may occur in the fuel pipe within the engine compartment. This can result in the vehicle catching…
SR/00445/25 ↗The front left or right ball joint mount on the front lower suspension arm may have defective fixing screws, which could break. Two missing screws will cause the ball joint mount to pivot and the affected wheel to…
SR/00050/25 ↗Pełny tekst
The front left or right ball joint mount on the front lower suspension arm may have defective fixing screws, which could break. Two missing screws will cause the ball joint mount to pivot and the affected wheel to change direction and hit the mudguard, which may affect the steering capacity of the vehicle, increasing the risk of an accident.
The subframe support can corrode, leading to cracks. This can result in the loss of structural integrity and the consequent loss of control of the vehicle.
A12/03137/24 ↗In certain vehicles fitted with the DV5R E6.3 engine, the nitrogen oxide (NOx) emissions are above the regulatory limits. Excessive NOx emissions pose a risk to the environment.
A12/02824/24 ↗A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.
A12/01870/23 ↗Computer software used in after-sales operations between October 2020 and January 2021 was incorrect. This may lead to Nitrogen Oxides (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to…
A12/00046/22 ↗Pełny tekst
Computer software used in after-sales operations between October 2020 and January 2021 was incorrect. This may lead to Nitrogen Oxides (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to the environment.
The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of…
A12/01184/21 ↗Pełny tekst
The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The passenger seat may not be adequately fastened.As a result, the seatback may not provide sufficient support in the event of an accident, increasing the risk of an injury.
A12/00822/20 ↗The welding of the tow bar may be faulty. As a result, the trailer coupling could break, increasing the risk of an accident.
A12/00646/21 ↗The vacuum pump may be damaged due to material abrasion of the cog belt.As a result, the braking assistance could be reduced or lost, increasing the risk of an accident.
A12/01505/20 ↗The sub-frame may corrode and fracture due to defective anti-rust treatment.This can lead to loss of control over the vehicle, increasing the risk of an accident.
A12/01193/20 ↗The two bolts attaching the trailer hitch can break.Consequently, the trailer will become detached, increasing the risk of an accident.
A12/00381/20 ↗The screws of the spare wheel support may be insufficiently tightened. As a result, the spare wheel could be detached inadvertently, increasing the risk of an accident and posing a risk to the following traffic.
A12/1895/19 ↗Wrong engine calibration tuning might cause the exhaust emissions' level of nitrogen oxides (NOx) to exceed regulated limits. Nitrogen oxides are harmful to human health and the environment.
A12/1594/19 ↗The wiring harness on the voltage retaining device (DMTR) may have been inadequately tightened, which may cause the device to break. This could result in the engine not starting and, in very rare cases, it could start a…
A12/0661/19 ↗The wheel fastening nuts may have been insufficiently tightened. There is a risk that the wheel may come off or crack during driving, increasing the risk of accident.
A12/1812/18 ↗The cylinder-housing oil gallery plug may not have been correctly tightened. As a consequence oil might leak which presents a skid hazard for following traffic.
A12/1364/18 ↗Engine overheating may lead to an oil leak. Engine failure while driving could lead to loss of control of the vehicle resulting in a crash.
A12/0399/18 ↗There could be contact between a fuel hose and the aerodynamic screen located under the fuel tank. Over time, this could cause a fuel leak underneath the vehicle.
A12/0272/18 ↗null The fixing screws of the wheel hubs on the rear cross member may not be tightened correctly. As a result, they could loosen which could lead to a loss of vehicle control while driving.
A12/1360/17 ↗null The starter motor supply terminal may come into contact with an engine component. This could lead to damage to the supply terminal and to a short circuit. As a result, it may be impossible to start the vehicle.
A12/1344/17 ↗null The power terminal on the starter is incorrectly positioned which could result in the electric starter cable being in contact with the exhaust gas recirculation valve. This could lead to wear of the insulation of…
A12/0996/17 ↗Pełny tekst
null The power terminal on the starter is incorrectly positioned which could result in the electric starter cable being in contact with the exhaust gas recirculation valve. This could lead to wear of the insulation of the electric starter cable and the risk of a short-circuit occurring.
null The hinge pin of the doors and of the retaining clip for this axis might have been incorrectly positioned, which could make it difficult to open and close the doors. If the door falls during the opening, it cannot…
A12/0281/17 ↗Pełny tekst
null The hinge pin of the doors and of the retaining clip for this axis might have been incorrectly positioned, which could make it difficult to open and close the doors. If the door falls during the opening, it cannot be excluded that it could hurt a passer-by or the person opening the door from the outside.
null Oil may leak from the turbocharger on to hot engine parts which could lead to a fire breaking out, even after the engine has been switched off.
A12/0437/16 ↗null In the case of negative exterior temperatures, and after repeated activation of the fuel heater, an electric connection on the cover of the fuel heater can overheat. This can cause the cover to melt, allowing air…
A12/1317/15 ↗Pełny tekst
null In the case of negative exterior temperatures, and after repeated activation of the fuel heater, an electric connection on the cover of the fuel heater can overheat. This can cause the cover to melt, allowing air to enter the fuel system which could lead to stalling of the engine and loss of control of the car.
null The affected vehicles may exhibit friction wear on the driver's seat wiring harness, potentially causing an electrical malfunction or localised overheating and/or causing the driver's airbag to be triggered.
A12/1068/14 ↗