AutoDefects
Deutsch

Kompakte SUVs

Peugeot 5008: Zuverlässigkeit

Bei 35.613 britischen MOT-Prüfungen fielen 17,4% der Peugeot 5008 wegen eines technischen oder Karosseriemangels durch. Median eines kompakten SUVs gleichen Alters und gleicher Laufleistung: 12,9%.

47von 100Unterdurchschnittlich35% mehr technische Mängel als die Klasse
Beste Baujahre
—
Baujahre mit den meisten Mängeln
2017, 2020, 2021
Schwachstelle bei hoher Laufleistung
Lenkung, Fahrwerk und Räder, Bremsen
Amtliche Rückrufe
39 Rückrufe, davon 11 ernst
Technische Mängelquote
17,4%
Klassenmedian, gleiches Alter und gleiche Laufleistung
12,9%
MOT-Prüfungen
35.613
Beschwerden von US-Haltern
0

MOT-Ergebnisse nach Prüfjahr

Alle Fahrzeuge dieses Modells bei der Prüfung des jeweiligen Jahres im Vergleich mit der Klasse bei gleichem Alter und gleicher Laufleistung. Zeigt, ob das Modell mit dem Alter mithält.

PrüfjahrPrüfungenTechnische MängelKlassenmedianAlle Mängel
202435.61317,4%12,9%30,0%
202331.01617,4%13,6%31,2%

Mängelquote nach Jahr der Erstzulassung

Technische Mängelquote bei der MOT-Prüfung 2024 nach Jahr der Erstzulassung, verglichen mit dem Klassenmedian bei gleichem Alter und gleicher Laufleistung.

Dieses ModellKlassenmedian
0%14%28%2010: 38,4%2010 Klassenmedian: 31,6%102011: 34,5%2011 Klassenmedian: 30,9%112012: 34,9%2012 Klassenmedian: 28,2%122013: 31,8%2013 Klassenmedian: 26,5%132014: 27,8%2014 Klassenmedian: 20,9%142015: 23,1%2015 Klassenmedian: 17,9%152016: 20,2%2016 Klassenmedian: 14,3%162017: 18,5%2017 Klassenmedian: 10,5%172018: 12,9%2018 Klassenmedian: 8,3%182019: 9,8%2019 Klassenmedian: 6,5%192020: 8,2%2020 Klassenmedian: 4,4%202021: 6,5%2021 Klassenmedian: 3,7%212022: 6,4%2022 Klassenmedian: 2,2%22
JahrPrüfungenTechnische MängelKlassenmedianAlle MängelRückrufe
20222496,4%2,2%11,7%6
20215.5956,5%3,7%15,6%6
20204.8038,2%4,4%17,9%7
20195.7749,8%6,5%19,9%10
20185.08612,9%8,3%23,2%14
201775518,5%10,5%34,0%14
20161.77720,2%14,3%39,1%14
20151.74923,1%17,9%41,7%11
20141.70827,8%20,9%47,4%11
20132.27631,8%26,5%50,1%11
20121.99934,9%28,2%50,6%10
20111.78434,5%30,9%50,0%8
20102.01938,4%31,6%52,6%8

Was nach Laufleistung ausfällt

Anteil der Prüfungen, die an der jeweiligen Baugruppe scheiterten. Verschleißteile (Lampen, Reifen, Wischer, Kennzeichen) zählen nicht zum Zuverlässigkeitswert.

Baugruppe0-50k km50-100k km100-150k km150k+ km
Technische Mängel5,3% (2,9)12,0% (7,5)22,3% (17,1)34,7% (28,9)
Prüfungen7.48213.6826.9797.470
Fahrwerk und Räder0,5% (0,7)2,4% (2,3)8,5% (7,8)18,7% (15,6)
Bremsen3,2% (1,6)5,8% (4,2)8,3% (6,2)12,5% (9,6)
Motor, Abgasanlage und Emissionen0,4% (0,4)1,1% (0,8)2,5% (2,0)5,1% (4,3)
Lenkung0,0% (0,1)0,4% (0,3)2,4% (1,5)7,0% (3,7)
Karosserie, Rahmen und Rost0,9% (0,2)2,8% (0,5)5,9% (1,5)7,0% (4,4)
Gurte und Airbags0,7% (0,2)0,9% (0,3)2,1% (0,6)3,4% (1,0)
Licht und Elektrik (Verschleiß)2,4% (2,0)6,3% (3,2)18,3% (7,5)28,6% (15,0)
Reifen (Verschleiß)6,3% (3,2)7,4% (5,0)9,8% (6,1)11,9% (6,9)
Wischer und Scheibe (Verschleiß)2,3% (2,4)3,8% (3,0)6,0% (3,7)8,8% (5,5)
Sonstiges und Kennzeichen (Verschleiß)0,1% (0,1)0,2% (0,2)0,2% (0,2)0,3% (0,4)

(…) = Klassenmedian, gleiches Alter und gleiche Laufleistung

Checkliste für die Werkstatt vor dem Kauf

Abgeleitet aus den Baugruppen, bei denen dieses Modell ab 100.000 km häufiger durchfällt als seine Klasse, und aus offenen Rückrufen.

  1. Lenkung: Spiel in Lenkgetriebe, Spurstangen und -köpfen, Undichtigkeiten der Servolenkung und Geräusche bei Volleinschlag prüfen.
  2. Fahrwerk und Räder: Querlenker, Buchsen, Traggelenke, Federn und Stoßdämpfer auf Spiel, Risse und Undichtigkeiten prüfen; auf ungleichmäßigen Reifenverschleiß achten.
  3. Bremsen: Scheiben und Beläge messen, Bremsleitungen und -schläuche auf Rost prüfen, Handbremse und ABS-Leuchte testen.
  4. Rückrufe: 5 ernste Rückrufe betreffen dieses Modell – lassen Sie sich die Erledigung nachweisen
    • SR/01379/26 · 2008–2026 · Due to a defect of the engine control unit (inverter) in the vehicles fitted with electric double clutch transmission (e-DCT), metallic…
    • SR/01314/26 · 2025 · Vehicles may be fitted with cylinder blocks which are missing a cooling nozzle. If a cooling nozzle is missing, the piston may not be…
    • SR/02936/25 · 2008–2025 · The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may…
    • SR/03373/25 · 2025 · The connection for the auxiliary heating in the 48 V battery harness terminal may not be adequate. This issue could lead to the heating not…
    • SR/01778/25 · 2023–2025 · The low-pressure fuel line may touch the screw of the ignition coil. This contact may damage the fuel line and eventually lead to a fuel…

    Ein bestimmtes Auto per FIN auf den offiziellen Seiten prüfen: NHTSA (US) · DVSA (UK)

Amtliche Rückrufe

Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.

  • EU Safety Gate2025

    Some vehicles have been registered with class A+ tyres, while the tyres actually fitted are class B. Therefore, the CO₂ emissions declared in the certificate of conformity, which are related to the tyre class, are…

    Volltext

    Some vehicles have been registered with class A+ tyres, while the tyres actually fitted are class B. Therefore, the CO₂ emissions declared in the certificate of conformity, which are related to the tyre class, are incorrect. The tyre class has an impact on rolling resistance and therefore affects CO₂ emissions. Class B tyres generally have a higher rolling resistance than class A+ tyres.

    OR/00115/26 ↗
  • EU Safety Gate2023–2026

    Interior door handles may deactivate when the key is in engine-running mode, which could prevent occupants from exiting the vehicle, potentially leading to injury in the event of an accident.

    SR/01735/26 ↗
  • EU Safety GateErnst2008–2026

    Due to a defect of the engine control unit (inverter) in the vehicles fitted with electric double clutch transmission (e-DCT), metallic soldering residues may cause an internal electric short-circuits. This could lead…

    Volltext

    Due to a defect of the engine control unit (inverter) in the vehicles fitted with electric double clutch transmission (e-DCT), metallic soldering residues may cause an internal electric short-circuits. This could lead to continuous power supply and overheating due to a blocked relay and cause a fire.

    SR/01379/26 ↗
  • EU Safety GateErnst2025

    Vehicles may be fitted with cylinder blocks which are missing a cooling nozzle. If a cooling nozzle is missing, the piston may not be cooled down sufficiently, potentially causing it to weaken, warp or break. This could…

    Volltext

    Vehicles may be fitted with cylinder blocks which are missing a cooling nozzle. If a cooling nozzle is missing, the piston may not be cooled down sufficiently, potentially causing it to weaken, warp or break. This could lead to sudden engine failure, causing power transmission loss. This could also trigger thermal runaway leading to fire and injuries of the passengers.

    SR/01314/26 ↗
  • EU Safety Gate2024, 2025

    The wheel nuts are not securely tightened, which could result in the wheel nut coming loose while the vehicle is in motion, or the loss of a wheel. This could result in an accident and injuries.

    SR/00476/26 ↗
  • EU Safety GateErnst2008–2025

    The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may cause a fire in the vehicle.

    SR/02936/25 ↗
33 weitere Rückrufe anzeigen
  • EU Safety Gate2023–2025

    The fixing screws on the front left and right ball joint mount on the front lower suspension arm may break. This could cause the ball joint mount to pivot and the affected wheel to change direction and hit the mudguard,…

    Volltext

    The fixing screws on the front left and right ball joint mount on the front lower suspension arm may break. This could cause the ball joint mount to pivot and the affected wheel to change direction and hit the mudguard, which may affect the steering capacity of the vehicle and cause an accident.

    SR/04357/25 ↗
  • EU Safety Gate2023–2035

    Due to incorrect coding in the Built-in Systems Interface, the Stop&Start function is inoperative, which may result in increased CO2 emissions.

    SR/03887/25 ↗
  • EU Safety GateErnst2025

    The connection for the auxiliary heating in the 48 V battery harness terminal may not be adequate. This issue could lead to the heating not functioning properly. In rare instances, there is a possibility of an electric…

    Volltext

    The connection for the auxiliary heating in the 48 V battery harness terminal may not be adequate. This issue could lead to the heating not functioning properly. In rare instances, there is a possibility of an electric arc and overheating, which might increase the risk of a fire in the vehicle.

    SR/03373/25 ↗
  • EU Safety Gate1928–1957

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…

    Volltext

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.

    SR/03153/25 ↗
  • EU Safety Gate2008–2023

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…

    Volltext

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.

    SR/02658/25 ↗
  • EU Safety GateErnst2023–2025

    The low-pressure fuel line may touch the screw of the ignition coil. This contact may damage the fuel line and eventually lead to a fuel leak, which may cause the vehicle to catch fire.

    SR/01778/25 ↗
  • EU Safety Gate2024

    The headrests may not stay in the position they have been set in, due to defective lock slots on the headrest supports. In the event of an accident, they can come loose, which can compromise their protective function,…

    Volltext

    The headrests may not stay in the position they have been set in, due to defective lock slots on the headrest supports. In the event of an accident, they can come loose, which can compromise their protective function, increasing the risk of injuries.

    SR/00884/25 ↗
  • EU Safety GateErnst2023, 2024

    Due to a weakness in the crimping interface of the quick coupling connector fitted to the high-pressure fuel pump, a leak may occur in the fuel pipe within the engine compartment. This can result in the vehicle catching…

    SR/00445/25 ↗
  • EU Safety Gate2023, 2024

    The front left or right ball joint mount on the front lower suspension arm may have defective fixing screws, which could break. Two missing screws will cause the ball joint mount to pivot and the affected wheel to…

    Volltext

    The front left or right ball joint mount on the front lower suspension arm may have defective fixing screws, which could break. Two missing screws will cause the ball joint mount to pivot and the affected wheel to change direction and hit the mudguard, which may affect the steering capacity of the vehicle, increasing the risk of an accident.

    SR/00050/25 ↗
  • EU Safety Gate2024

    The subframe support can corrode, leading to cracks. This can result in the loss of structural integrity and the consequent loss of control of the vehicle.

    A12/03137/24 ↗
  • EU Safety Gate2008–2022

    In certain vehicles fitted with the DV5R E6.3 engine, the nitrogen oxide (NOx) emissions are above the regulatory limits. Excessive NOx emissions pose a risk to the environment.

    A12/02824/24 ↗
  • EU Safety Gate2008–2022

    A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.

    A12/01870/23 ↗
  • EU Safety Gate2008–2019

    Computer software used in after-sales operations between October 2020 and January 2021 was incorrect. This may lead to Nitrogen Oxides (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to…

    Volltext

    Computer software used in after-sales operations between October 2020 and January 2021 was incorrect. This may lead to Nitrogen Oxides (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to the environment.

    A12/00046/22 ↗
  • EU Safety Gate2008–2018

    The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of…

    Volltext

    The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01184/21 ↗
  • EU Safety Gate2018

    The passenger seat may not be adequately fastened.As a result, the seatback may not provide sufficient support in the event of an accident, increasing the risk of an injury.

    A12/00822/20 ↗
  • EU Safety Gate2016–2020

    The welding of the tow bar may be faulty. As a result, the trailer coupling could break, increasing the risk of an accident.

    A12/00646/21 ↗
  • EU Safety Gate2013–2017

    The vacuum pump may be damaged due to material abrasion of the cog belt.As a result, the braking assistance could be reduced or lost, increasing the risk of an accident.

    A12/01505/20 ↗
  • EU Safety Gate2015

    The sub-frame may corrode and fracture due to defective anti-rust treatment.This can lead to loss of control over the vehicle, increasing the risk of an accident.

    A12/01193/20 ↗
  • EU Safety Gate2019

    The two bolts attaching the trailer hitch can break.Consequently, the trailer will become detached, increasing the risk of an accident.

    A12/00381/20 ↗
  • EU Safety Gate2018, 2019

    The screws of the spare wheel support may be insufficiently tightened. As a result, the spare wheel could be detached inadvertently, increasing the risk of an accident and posing a risk to the following traffic.

    A12/1895/19 ↗
  • EU Safety Gate2008–2037

    Wrong engine calibration tuning might cause the exhaust emissions' level of nitrogen oxides (NOx) to exceed regulated limits. Nitrogen oxides are harmful to human health and the environment.

    A12/1594/19 ↗
  • EU Safety GateErnst2018

    The wiring harness on the voltage retaining device (DMTR) may have been inadequately tightened, which may cause the device to break. This could result in the engine not starting and, in very rare cases, it could start a…

    A12/0661/19 ↗
  • EU Safety GateErnst2018

    The wheel fastening nuts may have been insufficiently tightened. There is a risk that the wheel may come off or crack during driving, increasing the risk of accident.

    A12/1812/18 ↗
  • EU Safety Gate2018

    The cylinder-housing oil gallery plug may not have been correctly tightened. As a consequence oil might leak which presents a skid hazard for following traffic.

    A12/1364/18 ↗
  • EU Safety Gate2012–2015

    Engine overheating may lead to an oil leak. Engine failure while driving could lead to loss of control of the vehicle resulting in a crash.

    A12/0399/18 ↗
  • EU Safety GateErnst2016, 2017

    There could be contact between a fuel hose and the aerodynamic screen located under the fuel tank. Over time, this could cause a fuel leak underneath the vehicle.

    A12/0272/18 ↗
  • EU Safety Gate2017

    null The fixing screws of the wheel hubs on the rear cross member may not be tightened correctly. As a result, they could loosen which could lead to a loss of vehicle control while driving.

    A12/1360/17 ↗
  • EU Safety Gate2016, 2017

    null The starter motor supply terminal may come into contact with an engine component. This could lead to damage to the supply terminal and to a short circuit. As a result, it may be impossible to start the vehicle.

    A12/1344/17 ↗
  • EU Safety Gate

    null The power terminal on the starter is incorrectly positioned which could result in the electric starter cable being in contact with the exhaust gas recirculation valve. This could lead to wear of the insulation of…

    Volltext

    null The power terminal on the starter is incorrectly positioned which could result in the electric starter cable being in contact with the exhaust gas recirculation valve. This could lead to wear of the insulation of the electric starter cable and the risk of a short-circuit occurring.

    A12/0996/17 ↗
  • EU Safety Gate2016, 2017

    null The hinge pin of the doors and of the retaining clip for this axis might have been incorrectly positioned, which could make it difficult to open and close the doors. If the door falls during the opening, it cannot…

    Volltext

    null The hinge pin of the doors and of the retaining clip for this axis might have been incorrectly positioned, which could make it difficult to open and close the doors. If the door falls during the opening, it cannot be excluded that it could hurt a passer-by or the person opening the door from the outside.

    A12/0281/17 ↗
  • EU Safety GateErnst2016

    null Oil may leak from the turbocharger on to hot engine parts which could lead to a fire breaking out, even after the engine has been switched off.

    A12/0437/16 ↗
  • EU Safety Gate2012–2014

    null In the case of negative exterior temperatures, and after repeated activation of the fuel heater, an electric connection on the cover of the fuel heater can overheat. This can cause the cover to melt, allowing air…

    Volltext

    null In the case of negative exterior temperatures, and after repeated activation of the fuel heater, an electric connection on the cover of the fuel heater can overheat. This can cause the cover to melt, allowing air to enter the fuel system which could lead to stalling of the engine and loss of control of the car.

    A12/1317/15 ↗
  • EU Safety GateErnst

    null The affected vehicles may exhibit friction wear on the driver's seat wiring harness, potentially causing an electrical malfunction or localised overheating and/or causing the driver's airbag to be triggered.

    A12/1068/14 ↗