AutoDefects
Français

Mercedes-Benz CLS 2021 : fiabilité

399 % de défaillances mécaniques en plus que la catégorie

57 contrôles MOT de Mercedes-Benz CLS immatriculées pour la première fois en 2021 : 10,5 % recalées pour un défaut mécanique ; la médiane de la catégorie au même âge et kilométrage est de 2,1 %.

Taux de défaillance mécanique
10,5%
Médiane de la catégorie, même âge et kilométrage
2,1%
Recalés (toute raison)
17,5%
contrôles MOT
57
Rappels
8

Ce qui lâche selon le kilométrage

KilométrageContrôlesDéfaillance mécaniqueMédiane catégorie
0-50k km458,9%1,8%
50-100k km1216,7%3,3%

Rappels officiels

Rappels publiés par la NHTSA (États-Unis) et l’EU Safety Gate qui citent ce modèle. Vérifiez par VIN si une voiture précise est concernée.

  • EU Safety GateGrave2017–2022

    The electrical connector of the transmission wiring harness may not have been correctly processed. This can lead to water entering the connector, which could cause short circuit and can create a thermal overload of the…

    Texte complet

    The electrical connector of the transmission wiring harness may not have been correctly processed. This can lead to water entering the connector, which could cause short circuit and can create a thermal overload of the connector when the vehicle is parked, causing the risk of fire.

    A12/01979/24 ↗
  • EU Safety GateGrave2020, 2021

    The software of the airbag control module may be faulty. In the event of an accident, this can lead the active bonnet system not to be activated properly. This increases the risk of injury to other road users.

    A12/01980/24 ↗
  • EU Safety GateGrave2021–2023

    The 48V ground cable bolt in the engine compartment may be incorrectly secured. This could increase electrical transition resistance at the point of connection. As a result, the high electrical currents that can flow…

    Texte complet

    The 48V ground cable bolt in the engine compartment may be incorrectly secured. This could increase electrical transition resistance at the point of connection. As a result, the high electrical currents that can flow through this connection could increase the temperature, increasing the risk of fire. Furthermore, the 48V electrical power supply failure may increase exhaust emissions. This could have a negative impact on the environment.

    A12/00463/24 ↗
  • EU Safety GateGrave2015–2022

    The seal for the special plug-in contact of the gearbox designed to protect against contact with moisture and splashing water is improperly installed. Thus splashed water can enter the socket contact when driving in wet…

    Texte complet

    The seal for the special plug-in contact of the gearbox designed to protect against contact with moisture and splashing water is improperly installed. Thus splashed water can enter the socket contact when driving in wet conditions and can lead to a short circuit, increasing the risk of a fire.

    A12/01237/22 ↗
  • EU Safety GateGrave2021

    The screw connection of the 48 V ground connector of the coolant electric compressor may come loose and lead to improper attachment of the ground line cable head. This increases the electrical contact resistance and can…

    Texte complet

    The screw connection of the 48 V ground connector of the coolant electric compressor may come loose and lead to improper attachment of the ground line cable head. This increases the electrical contact resistance and can cause the temperature at the connection point to increase, increasing the risk of fire.

    A12/00901/22 ↗
  • EU Safety GateGrave2017–2021

    The vacuum-controlled coolant pump may not be tightly sealed between the coolant and vacuum circuits. This may result in the coolant leaking into the vacuum circuit leading to an electrochemical reaction, increasing the…

    Texte complet

    The vacuum-controlled coolant pump may not be tightly sealed between the coolant and vacuum circuits. This may result in the coolant leaking into the vacuum circuit leading to an electrochemical reaction, increasing the risk of fire.

    A12/00045/22 ↗
Afficher 2 rappels de plus
  • EU Safety Gate2021

    In certain vehicles with a calliper disc-brake system, the bolts of the brake callipers on the front axle may not meet the specifications. A brake calliper can detach during braking, which may lead to braking power…

    Texte complet

    In certain vehicles with a calliper disc-brake system, the bolts of the brake callipers on the front axle may not meet the specifications. A brake calliper can detach during braking, which may lead to braking power being reduced and components being lost. That would increase the potential risk of accidents, including for the following traffic.

    A12/01658/21 ↗
  • EU Safety Gate2021

    The mounting screws of the disc brake callipers on the front axle may not be in line with specifications. As a result, when braking, a disc brake calliper may detach, increasing the risk of accidents.

    A12/01603/21 ↗