Mercedes-Benz CLS 2021: niezawodność
57 badań MOT egzemplarzy Mercedes-Benz CLS zarejestrowanych po raz pierwszy w 2021: 10,5% nie przeszło z powodu usterki mechanicznej; mediana klasy w tym samym wieku i z tym samym przebiegiem to 2,1%.
- Usterki mechaniczne
- 10,5%
- Mediana klasy, ten sam wiek i przebieg
- 2,1%
- Negatywne badanie (dowolny powód)
- 17,5%
- badań MOT
- 57
- Akcje przywoławcze
- 8
Co się psuje w zależności od przebiegu
| Przebieg | Badania | Usterki mechaniczne | Mediana klasy |
|---|---|---|---|
| 0-50k km | 45 | 8,9% | 1,8% |
| 50-100k km | 12 | 16,7% | 3,3% |
Oficjalne akcje przywoławcze
Akcje opublikowane przez NHTSA (USA) i EU Safety Gate, w których wymieniono ten model. Czy dotyczą konkretnego auta, sprawdź po VIN.
The electrical connector of the transmission wiring harness may not have been correctly processed. This can lead to water entering the connector, which could cause short circuit and can create a thermal overload of the…
A12/01979/24 ↗Pełny tekst
The electrical connector of the transmission wiring harness may not have been correctly processed. This can lead to water entering the connector, which could cause short circuit and can create a thermal overload of the connector when the vehicle is parked, causing the risk of fire.
The software of the airbag control module may be faulty. In the event of an accident, this can lead the active bonnet system not to be activated properly. This increases the risk of injury to other road users.
A12/01980/24 ↗The 48V ground cable bolt in the engine compartment may be incorrectly secured. This could increase electrical transition resistance at the point of connection. As a result, the high electrical currents that can flow…
A12/00463/24 ↗Pełny tekst
The 48V ground cable bolt in the engine compartment may be incorrectly secured. This could increase electrical transition resistance at the point of connection. As a result, the high electrical currents that can flow through this connection could increase the temperature, increasing the risk of fire. Furthermore, the 48V electrical power supply failure may increase exhaust emissions. This could have a negative impact on the environment.
The seal for the special plug-in contact of the gearbox designed to protect against contact with moisture and splashing water is improperly installed. Thus splashed water can enter the socket contact when driving in wet…
A12/01237/22 ↗Pełny tekst
The seal for the special plug-in contact of the gearbox designed to protect against contact with moisture and splashing water is improperly installed. Thus splashed water can enter the socket contact when driving in wet conditions and can lead to a short circuit, increasing the risk of a fire.
The screw connection of the 48 V ground connector of the coolant electric compressor may come loose and lead to improper attachment of the ground line cable head. This increases the electrical contact resistance and can…
A12/00901/22 ↗Pełny tekst
The screw connection of the 48 V ground connector of the coolant electric compressor may come loose and lead to improper attachment of the ground line cable head. This increases the electrical contact resistance and can cause the temperature at the connection point to increase, increasing the risk of fire.
The vacuum-controlled coolant pump may not be tightly sealed between the coolant and vacuum circuits. This may result in the coolant leaking into the vacuum circuit leading to an electrochemical reaction, increasing the…
A12/00045/22 ↗Pełny tekst
The vacuum-controlled coolant pump may not be tightly sealed between the coolant and vacuum circuits. This may result in the coolant leaking into the vacuum circuit leading to an electrochemical reaction, increasing the risk of fire.
Pokaż jeszcze 2 akcji
In certain vehicles with a calliper disc-brake system, the bolts of the brake callipers on the front axle may not meet the specifications. A brake calliper can detach during braking, which may lead to braking power…
A12/01658/21 ↗Pełny tekst
In certain vehicles with a calliper disc-brake system, the bolts of the brake callipers on the front axle may not meet the specifications. A brake calliper can detach during braking, which may lead to braking power being reduced and components being lost. That would increase the potential risk of accidents, including for the following traffic.
The mounting screws of the disc brake callipers on the front axle may not be in line with specifications. As a result, when braking, a disc brake calliper may detach, increasing the risk of accidents.
A12/01603/21 ↗