AutoDefects
Français

Mercedes-Benz CLS 2018 : fiabilité

74 % de défaillances mécaniques en plus que la catégorie

991 contrôles MOT de Mercedes-Benz CLS immatriculées pour la première fois en 2018 : 9,6 % recalées pour un défaut mécanique ; la médiane de la catégorie au même âge et kilométrage est de 5,5 %.

Taux de défaillance mécanique
9,6%
Médiane de la catégorie, même âge et kilométrage
5,5%
Recalés (toute raison)
18,2%
contrôles MOT
991
Rappels
12

Ce qui lâche selon le kilométrage

KilométrageContrôlesDéfaillance mécaniqueMédiane catégorie
0-50k km1775,7%3,1%
50-100k km57410,1%5,7%
100-150k km20211,4%6,4%
150k+ km3810,5%8,4%

Ce qui lâche sur cette année

OrganeDéfaillance mécanique
Suspension et roues6,3%
Freins1,3%
Moteur, échappement et émissions1,7%
Direction0,2%
Carrosserie, châssis et corrosion0,9%
Ceintures et airbags0,0%
Éclairage et électricité (usure)1,3%
Pneus (usure)9,6%
Essuie-glaces et pare-brise (usure)0,7%
Divers et plaques (usure)0,3%

Rappels officiels

Rappels publiés par la NHTSA (États-Unis) et l’EU Safety Gate qui citent ce modèle. Vérifiez par VIN si une voiture précise est concernée.

  • EU Safety GateGrave2017–2022

    The electrical connector of the transmission wiring harness may not have been correctly processed. This can lead to water entering the connector, which could cause short circuit and can create a thermal overload of the…

    Texte complet

    The electrical connector of the transmission wiring harness may not have been correctly processed. This can lead to water entering the connector, which could cause short circuit and can create a thermal overload of the connector when the vehicle is parked, causing the risk of fire.

    A12/01979/24 ↗
  • EU Safety GateGrave2015–2022

    The seal for the special plug-in contact of the gearbox designed to protect against contact with moisture and splashing water is improperly installed. Thus splashed water can enter the socket contact when driving in wet…

    Texte complet

    The seal for the special plug-in contact of the gearbox designed to protect against contact with moisture and splashing water is improperly installed. Thus splashed water can enter the socket contact when driving in wet conditions and can lead to a short circuit, increasing the risk of a fire.

    A12/01237/22 ↗
  • EU Safety GateGrave2016–2020

    A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine compartment. Consequently, leaking fuel may come into contact with hot parts of the…

    Texte complet

    A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine compartment. Consequently, leaking fuel may come into contact with hot parts of the engine, increasing the risk of fire.

    A12/00017/22 ↗
  • EU Safety GateGrave2017–2021

    The vacuum-controlled coolant pump may not be tightly sealed between the coolant and vacuum circuits. This may result in the coolant leaking into the vacuum circuit leading to an electrochemical reaction, increasing the…

    Texte complet

    The vacuum-controlled coolant pump may not be tightly sealed between the coolant and vacuum circuits. This may result in the coolant leaking into the vacuum circuit leading to an electrochemical reaction, increasing the risk of fire.

    A12/00045/22 ↗
  • EU Safety GateGrave2018

    Cracks could occur in the high pressure lines between the fuel rail and the injectors. As a result, diesel fuel could leak into the engine compartment, increasing the risk of fire.Moreover, due to the fuel leak the…

    Texte complet

    Cracks could occur in the high pressure lines between the fuel rail and the injectors. As a result, diesel fuel could leak into the engine compartment, increasing the risk of fire.Moreover, due to the fuel leak the engine might not start, or the emergency operating mode might be activated.

    A12/00598/21 ↗
  • EU Safety GateGrave2018–2020

    Due to the lack of documentation, there is no confirmation that the screw connections of the turbocharger’s oil-supply and oil-return pipes were correctly executed during the assembly process. In the event of a loose…

    Texte complet

    Due to the lack of documentation, there is no confirmation that the screw connections of the turbocharger’s oil-supply and oil-return pipes were correctly executed during the assembly process. In the event of a loose screw connection, oil might leak at the oil-supply and/or oil-return pipe of the turbocharger.The leaking oil might then come into contact with hot components, increasing the risk of fire.

    A12/01336/20 ↗
Afficher 6 rappels de plus
  • EU Safety GateGrave2015–2019

    Moisture can penetrate into the busbar, giving rise to conductive contacts between the individual lines inside it. The resulting current flows could overheat the plastic material of the busbar, increasing the risk of…

    A12/00618/20 ↗
  • EU Safety GateGrave2018, 2019

    The fixing screws for the turbocharger oil return line and the crankcase breather pipe may have been interchanged. Due to a screw being too long, the pre-tensioning force of the screw connection may be insufficient and…

    Texte complet

    The fixing screws for the turbocharger oil return line and the crankcase breather pipe may have been interchanged. Due to a screw being too long, the pre-tensioning force of the screw connection may be insufficient and oil could leak from the turbocharger oil return line. As a result, oil could come into contact with hot components, increasing the risk of fire.

    A12/1130/19 ↗
  • EU Safety GateGrave2017, 2018

    The riveting of the front seat belt housing covers may be inadequate under low temperatures (below -17.5°C). In the event of an accident, the rivets could fail and release the housing cover. This can result in a loss of…

    Texte complet

    The riveting of the front seat belt housing covers may be inadequate under low temperatures (below -17.5°C). In the event of an accident, the rivets could fail and release the housing cover. This can result in a loss of the seat belt’s restraining effect, increasing the risk of injury.

    A12/0783/19 ↗
  • EU Safety Gate2014–2018

    In vehicles with rear-wheel drive, a lock nut in the steering gear may be cracked. Consequently, when the steering is placed under high forces it could break, which would block the steering gear and increase the risk of…

    Texte complet

    In vehicles with rear-wheel drive, a lock nut in the steering gear may be cracked. Consequently, when the steering is placed under high forces it could break, which would block the steering gear and increase the risk of accident.

    A12/0296/19 ↗
  • EU Safety Gate2014–2018

    There may be cracks in a securing nut in the steering gear of rear-wheel-drive vehicles. The nut could consequently break if the steering system is subject to a very high lateral force, which could result in rotating…

    Texte complet

    There may be cracks in a securing nut in the steering gear of rear-wheel-drive vehicles. The nut could consequently break if the steering system is subject to a very high lateral force, which could result in rotating parts in the steering gear affecting the casing and thereby blocking the steering system.

    A12/0164/19 ↗
  • EU Safety GateGrave2017, 2018

    The calibration of the occupant classification system for the passenger seat does not work correctly. If a child seat is installed on the passenger seat, the airbag might not be deactivated and be deployed in the event…

    Texte complet

    The calibration of the occupant classification system for the passenger seat does not work correctly. If a child seat is installed on the passenger seat, the airbag might not be deactivated and be deployed in the event of an accident.

    A12/1447/18 ↗