AutoDefects
Français

Audi Q3 2020 : fiabilité

3 % de défaillances mécaniques en moins que la catégorie

12 756 contrôles MOT de Audi Q3 immatriculées pour la première fois en 2020 : 2,6 % recalées pour un défaut mécanique ; la médiane de la catégorie au même âge et kilométrage est de 2,6 %.

Taux de défaillance mécanique
2,6%
Médiane de la catégorie, même âge et kilométrage
2,6%
Recalés (toute raison)
7,7%
contrôles MOT
12 756
Rappels
11

Ce qui lâche selon le kilométrage

KilométrageContrôlesDéfaillance mécaniqueMédiane catégorie
0-50k km7 0091,7%1,9%
50-100k km5 4153,5%3,5%
100-150k km3036,3%5,4%
150k+ km290,0%5,5%

Ce qui lâche sur cette année

OrganeDéfaillance mécanique
Suspension et roues0,2%
Freins2,0%
Moteur, échappement et émissions0,1%
Direction0,0%
Carrosserie, châssis et corrosion0,1%
Ceintures et airbags0,2%
Éclairage et électricité (usure)0,7%
Pneus (usure)4,0%
Essuie-glaces et pare-brise (usure)1,2%
Divers et plaques (usure)0,2%

Rappels officiels

Rappels publiés par la NHTSA (États-Unis) et l’EU Safety Gate qui citent ce modèle. Vérifiez par VIN si une voiture précise est concernée.

  • EU Safety GateGrave2017–2024

    Moisture ingress in the steering rack area may cause corrosion of a steering rack bolt. As a result, the bolt could fracture and lead to a loss of steering capability, increasing the risk of an accident.

    SR/03079/26 ↗
  • NHTSA (US)Grave2019–2021

    Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2018 Tiguan, 2018-2019 Atlas, and 2019-2021 Audi Q3 vehicles. One of the bolts that attaches the steering rack to the subframe may corrode and break.…

    Texte complet

    Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2018 Tiguan, 2018-2019 Atlas, and 2019-2021 Audi Q3 vehicles. One of the bolts that attaches the steering rack to the subframe may corrode and break. If this happens, the steering rack housing can break.

    26V590000 ↗
  • EU Safety GateGrave2020–2022

    The fuse in the high-voltage (HV) system may have been produced with an insufficient amount of extinguishing sand. In the event of a short circuit in the high-voltage system, a voltage flashover could occur inside the…

    Texte complet

    The fuse in the high-voltage (HV) system may have been produced with an insufficient amount of extinguishing sand. In the event of a short circuit in the high-voltage system, a voltage flashover could occur inside the vehicle and subsequently pose a risk of fire and injuries.

    A12/00667/22 ↗
  • EU Safety GateGrave2020–2022

    Design engine covers installed on all affected vehicles could detach from their fixings depending on the conditions of use (e.g. very sporty driving, or poor road surfaces) and their age. A loose engine cover could come…

    Texte complet

    Design engine covers installed on all affected vehicles could detach from their fixings depending on the conditions of use (e.g. very sporty driving, or poor road surfaces) and their age. A loose engine cover could come into contact with the hot area of the exhaust gas turbocharger, increasing the risk of burns or fire.

    A12/00541/22 ↗
  • EU Safety Gate2020, 2021

    The bolt of the pressure-input shaft situated between the electromechanical brake servo and the brake pedal may come loose.As a result, the mechanical connection between the brake pedal and thebrake servo would no…

    Texte complet

    The bolt of the pressure-input shaft situated between the electromechanical brake servo and the brake pedal may come loose.As a result, the mechanical connection between the brake pedal and thebrake servo would no longer be guaranteed, increasing the risk of anaccident.In the event of an emergency, the vehicle can be immobilised by activating the electronic parking brake. The product does not meet the requirements set out in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles

    A12/01389/21 ↗
  • EU Safety Gate2020

    Due to a manufacturing error, a weld joint between the brake pedal and the brake-pedal plate could break when the brake pedal is suddenly applied.This can result in complete detachment of the brake-pedal plate,…

    Texte complet

    Due to a manufacturing error, a weld joint between the brake pedal and the brake-pedal plate could break when the brake pedal is suddenly applied.This can result in complete detachment of the brake-pedal plate, increasing the risk of an accident.

    A12/00345/21 ↗
Afficher 5 rappels de plus
  • EU Safety Gate2019, 2020

    Due to a manufacturing error, the belt-pulley securing ring of the steering system may not be fully engaged. As a result, the securing ring may become detached and subsequently jam with surrounding components, leading…

    Texte complet

    Due to a manufacturing error, the belt-pulley securing ring of the steering system may not be fully engaged. As a result, the securing ring may become detached and subsequently jam with surrounding components, leading to possible locking of the steering system.

    A12/00221/21 ↗
  • NHTSA (US)2020

    Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2020 Audi Q3 vehicles. The brake pedal plate can bend or detach under the pressure applied during sudden stopping.

    20V786000 ↗
  • EU Safety Gate2020

    The screw connection attaching the seat frame to the seat rail may not be correctly executed. As a result, it may fail in the event of an accident, increasing the risk of injury.

    A12/01482/20 ↗
  • NHTSA (US)2020

    Volkswagen Group of America, Inc. (Audi) is recalling one 2020 Audi Q3 vehicle. The driver's seat frame may have incorrectly been bolted to the seat rail.

    20V644000 ↗
  • EU Safety GateGrave2019, 2020

    The breaking point for the release of the front passenger airbag in the console may not have been fabricated correctly. As a result, the airbag may not penetrate the console as required in the event of deployment.This…

    Texte complet

    The breaking point for the release of the front passenger airbag in the console may not have been fabricated correctly. As a result, the airbag may not penetrate the console as required in the event of deployment.This will impair its restraining and protective functions, increasing the risk of an injury.

    A12/00879/20 ↗