AutoDefects
Deutsch

Audi Q3 2020: Zuverlässigkeit

4% weniger technische Mängel als die Klasse

12.756 MOT-Prüfungen von Audi Q3 mit Erstzulassung 2020: 2,6% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 2,7%.

Technische Mängelquote
2,6%
Klassenmedian, gleiches Alter und gleiche Laufleistung
2,7%
Durchgefallen (jeder Grund)
7,7%
MOT-Prüfungen
12.756
Rückrufe
11

Was nach Laufleistung ausfällt

LaufleistungPrüfungenTechnische MängelKlassenmedian
0-50k km7.0091,7%1,9%
50-100k km5.4153,5%3,6%
100-150k km3036,3%4,9%
150k+ km290,0%5,5%

Was bei diesem Baujahr ausfällt

BaugruppeTechnische Mängel
Fahrwerk und Räder0,2%
Bremsen2,0%
Motor, Abgasanlage und Emissionen0,1%
Lenkung0,0%
Karosserie, Rahmen und Rost0,1%
Gurte und Airbags0,2%
Licht und Elektrik (Verschleiß)0,7%
Reifen (Verschleiß)4,0%
Wischer und Scheibe (Verschleiß)1,2%
Sonstiges und Kennzeichen (Verschleiß)0,2%

Amtliche Rückrufe

Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.

  • EU Safety GateErnst2017–2024

    Moisture ingress in the steering rack area may cause corrosion of a steering rack bolt. As a result, the bolt could fracture and lead to a loss of steering capability, increasing the risk of an accident.

    SR/03079/26 ↗
  • NHTSA (US)Ernst2019–2021

    Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2018 Tiguan, 2018-2019 Atlas, and 2019-2021 Audi Q3 vehicles. One of the bolts that attaches the steering rack to the subframe may corrode and break.…

    Volltext

    Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2018 Tiguan, 2018-2019 Atlas, and 2019-2021 Audi Q3 vehicles. One of the bolts that attaches the steering rack to the subframe may corrode and break. If this happens, the steering rack housing can break.

    26V590000 ↗
  • EU Safety GateErnst2020–2022

    The fuse in the high-voltage (HV) system may have been produced with an insufficient amount of extinguishing sand. In the event of a short circuit in the high-voltage system, a voltage flashover could occur inside the…

    Volltext

    The fuse in the high-voltage (HV) system may have been produced with an insufficient amount of extinguishing sand. In the event of a short circuit in the high-voltage system, a voltage flashover could occur inside the vehicle and subsequently pose a risk of fire and injuries.

    A12/00667/22 ↗
  • EU Safety GateErnst2020–2022

    Design engine covers installed on all affected vehicles could detach from their fixings depending on the conditions of use (e.g. very sporty driving, or poor road surfaces) and their age. A loose engine cover could come…

    Volltext

    Design engine covers installed on all affected vehicles could detach from their fixings depending on the conditions of use (e.g. very sporty driving, or poor road surfaces) and their age. A loose engine cover could come into contact with the hot area of the exhaust gas turbocharger, increasing the risk of burns or fire.

    A12/00541/22 ↗
  • EU Safety Gate2020, 2021

    The bolt of the pressure-input shaft situated between the electromechanical brake servo and the brake pedal may come loose.As a result, the mechanical connection between the brake pedal and thebrake servo would no…

    Volltext

    The bolt of the pressure-input shaft situated between the electromechanical brake servo and the brake pedal may come loose.As a result, the mechanical connection between the brake pedal and thebrake servo would no longer be guaranteed, increasing the risk of anaccident.In the event of an emergency, the vehicle can be immobilised by activating the electronic parking brake. The product does not meet the requirements set out in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles

    A12/01389/21 ↗
  • EU Safety Gate2020

    Due to a manufacturing error, a weld joint between the brake pedal and the brake-pedal plate could break when the brake pedal is suddenly applied.This can result in complete detachment of the brake-pedal plate,…

    Volltext

    Due to a manufacturing error, a weld joint between the brake pedal and the brake-pedal plate could break when the brake pedal is suddenly applied.This can result in complete detachment of the brake-pedal plate, increasing the risk of an accident.

    A12/00345/21 ↗
5 weitere Rückrufe anzeigen
  • EU Safety Gate2019, 2020

    Due to a manufacturing error, the belt-pulley securing ring of the steering system may not be fully engaged. As a result, the securing ring may become detached and subsequently jam with surrounding components, leading…

    Volltext

    Due to a manufacturing error, the belt-pulley securing ring of the steering system may not be fully engaged. As a result, the securing ring may become detached and subsequently jam with surrounding components, leading to possible locking of the steering system.

    A12/00221/21 ↗
  • NHTSA (US)2020

    Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2020 Audi Q3 vehicles. The brake pedal plate can bend or detach under the pressure applied during sudden stopping.

    20V786000 ↗
  • EU Safety Gate2020

    The screw connection attaching the seat frame to the seat rail may not be correctly executed. As a result, it may fail in the event of an accident, increasing the risk of injury.

    A12/01482/20 ↗
  • NHTSA (US)2020

    Volkswagen Group of America, Inc. (Audi) is recalling one 2020 Audi Q3 vehicle. The driver's seat frame may have incorrectly been bolted to the seat rail.

    20V644000 ↗
  • EU Safety GateErnst2019, 2020

    The breaking point for the release of the front passenger airbag in the console may not have been fabricated correctly. As a result, the airbag may not penetrate the console as required in the event of deployment.This…

    Volltext

    The breaking point for the release of the front passenger airbag in the console may not have been fabricated correctly. As a result, the airbag may not penetrate the console as required in the event of deployment.This will impair its restraining and protective functions, increasing the risk of an injury.

    A12/00879/20 ↗