AutoDefects
Español

Peugeot 308 2015: fiabilidad

17 % más fallos mecánicos que su clase

13.974 inspecciones MOT de Peugeot 308 matriculados por primera vez en 2015: el 20,0 % no pasó por un defecto mecánico; la mediana de su clase con la misma edad y kilometraje es del 17,1 %.

Tasa de fallo mecánico
20,0%
Mediana de la clase, misma edad y kilometraje
17,1%
No pasó la MOT (cualquier motivo)
31,4%
inspecciones MOT
13.974
Llamadas a revisión
18

Qué falla según el kilometraje

KilometrajeInspeccionesFallo mecánicoMediana de la clase
0-50k km4676,9%6,2%
50-100k km373515,7%11,9%
100-150k km562020,5%18,0%
150k+ km415224,8%21,7%

Qué falla en este año

SistemaFallo mecánico
Suspensión y ruedas8,8%
Frenos5,4%
Motor, escape y emisiones3,6%
Dirección3,0%
Carrocería, bastidor y corrosión5,0%
Cinturones y airbags0,5%
Luces y electricidad (desgaste)10,0%
Neumáticos (desgaste)8,6%
Escobillas y parabrisas (desgaste)3,4%
Otros y matrículas (desgaste)0,2%

Llamadas a revisión oficiales

Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.

  • EU Safety GateGrave2008–2026

    Due to a defect of the engine control unit (inverter) in the vehicles fitted with electric double clutch transmission (e-DCT), metallic soldering residues may cause an internal electric short-circuits. This could lead…

    Texto completo

    Due to a defect of the engine control unit (inverter) in the vehicles fitted with electric double clutch transmission (e-DCT), metallic soldering residues may cause an internal electric short-circuits. This could lead to continuous power supply and overheating due to a blocked relay and cause a fire.

    SR/01379/26 ↗
  • EU Safety GateGrave2008–2025

    The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may cause a fire in the vehicle.

    SR/02936/25 ↗
  • EU Safety Gate2013–2018

    The vehicle’s exhaust gases temperature is too low, making the catalytic converter less efficient. This may lead to excessive emissions, posing a risk to the environment.

    SR/03174/25 ↗
  • EU Safety GateGrave2015–2019

    The upper anchorages of the seatbelts in the second row of seats may break. This may reduce the retractor’s ability to restrain the occupants during a possible impact, leading to injuries.

    SR/02874/25 ↗
  • EU Safety Gate2008–2023

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…

    Texto completo

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.

    SR/02658/25 ↗
  • EU Safety Gate2008–2022

    In certain vehicles fitted with the DV5R E6.3 engine, the nitrogen oxide (NOx) emissions are above the regulatory limits. Excessive NOx emissions pose a risk to the environment.

    A12/02824/24 ↗
Mostrar 9 llamadas más
  • EU Safety Gate2008–2022

    A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.

    A12/01870/23 ↗
  • EU Safety Gate2008–2019

    Computer software used in after-sales operations between October 2020 and January 2021 was incorrect. This may lead to Nitrogen Oxides (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to…

    Texto completo

    Computer software used in after-sales operations between October 2020 and January 2021 was incorrect. This may lead to Nitrogen Oxides (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to the environment.

    A12/00046/22 ↗
  • EU Safety Gate2008–2018

    The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of…

    Texto completo

    The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01184/21 ↗
  • EU Safety Gate2013–2017

    The vacuum pump may be damaged due to material abrasion of the cog belt.As a result, the braking assistance could be reduced or lost, increasing the risk of an accident.

    A12/01505/20 ↗
  • EU Safety Gate2015

    The sub-frame may corrode and fracture due to defective anti-rust treatment.This can lead to loss of control over the vehicle, increasing the risk of an accident.

    A12/01193/20 ↗
  • EU Safety Gate2012–2015

    Engine overheating may lead to an oil leak. Engine failure while driving could lead to loss of control of the vehicle resulting in a crash.

    A12/0399/18 ↗
  • EU Safety Gate2014, 2015

    null The suspension wishbone mounting bolts could break. This could lead to the driver losing control of the vehicle.

    A12/0744/17 ↗
  • EU Safety Gate2015

    null Incorrect assembly of the wheel valve and fragility of screw heads could cause rupture of the valve which can result in loss of tyre pressure. Loss of tyre pressure can lead to loss of control of the vehicle and,…

    Texto completo

    null Incorrect assembly of the wheel valve and fragility of screw heads could cause rupture of the valve which can result in loss of tyre pressure. Loss of tyre pressure can lead to loss of control of the vehicle and, consequently to an accident.

    A12/1392/16 ↗
  • EU Safety Gate2015

    null There may be poor adhesion of the back spoiler on the boot lid. The spoiler could consequently fall.

    A12/1342/16 ↗