AutoDefects
Español

Peugeot 308 2017: fiabilidad

43 % más fallos mecánicos que su clase

9279 inspecciones MOT de Peugeot 308 matriculados por primera vez en 2017: el 14,3 % no pasó por un defecto mecánico; la mediana de su clase con la misma edad y kilometraje es del 10,0 %.

Tasa de fallo mecánico
14,3%
Mediana de la clase, misma edad y kilometraje
10,0%
No pasó la MOT (cualquier motivo)
24,7%
inspecciones MOT
9279
Llamadas a revisión
11

Qué falla según el kilometraje

KilometrajeInspeccionesFallo mecánicoMediana de la clase
0-50k km9185,8%4,3%
50-100k km427713,2%8,2%
100-150k km273516,3%12,0%
150k+ km134919,9%15,6%

Qué falla en este año

SistemaFallo mecánico
Suspensión y ruedas6,7%
Frenos4,5%
Motor, escape y emisiones3,1%
Dirección0,9%
Carrocería, bastidor y corrosión2,8%
Cinturones y airbags0,3%
Luces y electricidad (desgaste)6,6%
Neumáticos (desgaste)7,9%
Escobillas y parabrisas (desgaste)2,9%
Otros y matrículas (desgaste)0,2%

Llamadas a revisión oficiales

Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.

  • EU Safety GateGrave2008–2026

    Due to a defect of the engine control unit (inverter) in the vehicles fitted with electric double clutch transmission (e-DCT), metallic soldering residues may cause an internal electric short-circuits. This could lead…

    Texto completo

    Due to a defect of the engine control unit (inverter) in the vehicles fitted with electric double clutch transmission (e-DCT), metallic soldering residues may cause an internal electric short-circuits. This could lead to continuous power supply and overheating due to a blocked relay and cause a fire.

    SR/01379/26 ↗
  • EU Safety GateGrave2008–2025

    The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may cause a fire in the vehicle.

    SR/02936/25 ↗
  • EU Safety Gate2013–2018

    The vehicle’s exhaust gases temperature is too low, making the catalytic converter less efficient. This may lead to excessive emissions, posing a risk to the environment.

    SR/03174/25 ↗
  • EU Safety GateGrave2015–2019

    The upper anchorages of the seatbelts in the second row of seats may break. This may reduce the retractor’s ability to restrain the occupants during a possible impact, leading to injuries.

    SR/02874/25 ↗
  • EU Safety Gate2008–2023

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…

    Texto completo

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.

    SR/02658/25 ↗
  • EU Safety Gate2008–2022

    In certain vehicles fitted with the DV5R E6.3 engine, the nitrogen oxide (NOx) emissions are above the regulatory limits. Excessive NOx emissions pose a risk to the environment.

    A12/02824/24 ↗
Mostrar 5 llamadas más
  • EU Safety Gate2008–2022

    A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.

    A12/01870/23 ↗
  • EU Safety Gate2008–2019

    Computer software used in after-sales operations between October 2020 and January 2021 was incorrect. This may lead to Nitrogen Oxides (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to…

    Texto completo

    Computer software used in after-sales operations between October 2020 and January 2021 was incorrect. This may lead to Nitrogen Oxides (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to the environment.

    A12/00046/22 ↗
  • EU Safety Gate2008–2018

    The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of…

    Texto completo

    The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01184/21 ↗
  • EU Safety Gate2013–2017

    The vacuum pump may be damaged due to material abrasion of the cog belt.As a result, the braking assistance could be reduced or lost, increasing the risk of an accident.

    A12/01505/20 ↗
  • EU Safety GateGrave2017

    The airbag control units might have received a shock during transportation to the vehicle assembly plant, which might cause an internal fault. In the event of an accident, the airbags might not work correctly.

    A12/0777/18 ↗