Peugeot 308 2015: Zuverlässigkeit
13.974 MOT-Prüfungen von Peugeot 308 mit Erstzulassung 2015: 20,0% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 17,1%.
- Technische Mängelquote
- 20,0%
- Klassenmedian, gleiches Alter und gleiche Laufleistung
- 17,1%
- Durchgefallen (jeder Grund)
- 31,4%
- MOT-Prüfungen
- 13.974
- Rückrufe
- 18
Was nach Laufleistung ausfällt
| Laufleistung | Prüfungen | Technische Mängel | Klassenmedian |
|---|---|---|---|
| 0-50k km | 467 | 6,9% | 6,2% |
| 50-100k km | 3.735 | 15,7% | 11,9% |
| 100-150k km | 5.620 | 20,5% | 18,0% |
| 150k+ km | 4.152 | 24,8% | 21,7% |
Was bei diesem Baujahr ausfällt
Amtliche Rückrufe
Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.
Due to a defect of the engine control unit (inverter) in the vehicles fitted with electric double clutch transmission (e-DCT), metallic soldering residues may cause an internal electric short-circuits. This could lead…
SR/01379/26 ↗Volltext
Due to a defect of the engine control unit (inverter) in the vehicles fitted with electric double clutch transmission (e-DCT), metallic soldering residues may cause an internal electric short-circuits. This could lead to continuous power supply and overheating due to a blocked relay and cause a fire.
The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may cause a fire in the vehicle.
SR/02936/25 ↗The vehicle’s exhaust gases temperature is too low, making the catalytic converter less efficient. This may lead to excessive emissions, posing a risk to the environment.
SR/03174/25 ↗The upper anchorages of the seatbelts in the second row of seats may break. This may reduce the retractor’s ability to restrain the occupants during a possible impact, leading to injuries.
SR/02874/25 ↗Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…
SR/02658/25 ↗Volltext
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.
In certain vehicles fitted with the DV5R E6.3 engine, the nitrogen oxide (NOx) emissions are above the regulatory limits. Excessive NOx emissions pose a risk to the environment.
A12/02824/24 ↗
9 weitere Rückrufe anzeigen
A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.
A12/01870/23 ↗Computer software used in after-sales operations between October 2020 and January 2021 was incorrect. This may lead to Nitrogen Oxides (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to…
A12/00046/22 ↗Volltext
Computer software used in after-sales operations between October 2020 and January 2021 was incorrect. This may lead to Nitrogen Oxides (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to the environment.
The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of…
A12/01184/21 ↗Volltext
The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The vacuum pump may be damaged due to material abrasion of the cog belt.As a result, the braking assistance could be reduced or lost, increasing the risk of an accident.
A12/01505/20 ↗The sub-frame may corrode and fracture due to defective anti-rust treatment.This can lead to loss of control over the vehicle, increasing the risk of an accident.
A12/01193/20 ↗Engine overheating may lead to an oil leak. Engine failure while driving could lead to loss of control of the vehicle resulting in a crash.
A12/0399/18 ↗null The suspension wishbone mounting bolts could break. This could lead to the driver losing control of the vehicle.
A12/0744/17 ↗null Incorrect assembly of the wheel valve and fragility of screw heads could cause rupture of the valve which can result in loss of tyre pressure. Loss of tyre pressure can lead to loss of control of the vehicle and,…
A12/1392/16 ↗Volltext
null Incorrect assembly of the wheel valve and fragility of screw heads could cause rupture of the valve which can result in loss of tyre pressure. Loss of tyre pressure can lead to loss of control of the vehicle and, consequently to an accident.
null There may be poor adhesion of the back spoiler on the boot lid. The spoiler could consequently fall.
A12/1342/16 ↗