AutoDefects
Deutsch

Kleinstwagen

Toyota Aygo: Zuverlässigkeit

Bei 261.628 britischen MOT-Prüfungen fielen 13,6% der Toyota Aygo wegen eines technischen oder Karosseriemangels durch. Median eines Kleinstwagens gleichen Alters und gleicher Laufleistung: 16,2%.

83von 100Hohe Zuverlässigkeit16% weniger technische Mängel als die Klasse
Beste Baujahre
2013, 2016, 2022
Baujahre mit den meisten Mängeln
2020, 2021
Schwachstelle bei hoher Laufleistung
Motor, Abgasanlage und Emissionen, Bremsen, Karosserie, Rahmen und Rost
Amtliche Rückrufe
11 Rückrufe, davon 3 ernst
Technische Mängelquote
13,6%
Klassenmedian, gleiches Alter und gleiche Laufleistung
16,2%
MOT-Prüfungen
261.628
Beschwerden von US-Haltern
0

MOT-Ergebnisse nach Prüfjahr

Alle Fahrzeuge dieses Modells bei der Prüfung des jeweiligen Jahres im Vergleich mit der Klasse bei gleichem Alter und gleicher Laufleistung. Zeigt, ob das Modell mit dem Alter mithält.

PrüfjahrPrüfungenTechnische MängelKlassenmedianAlle Mängel
2024261.62813,6%16,2%24,3%
2023248.73412,8%15,6%23,6%

Mängelquote nach Jahr der Erstzulassung

Technische Mängelquote bei der MOT-Prüfung 2024 nach Jahr der Erstzulassung, verglichen mit dem Klassenmedian bei gleichem Alter und gleicher Laufleistung.

Dieses ModellKlassenmedian
0%14%27%2005: 37,0%2005 Klassenmedian: 37,2%052006: 34,2%2006 Klassenmedian: 37,1%062007: 33,9%2007 Klassenmedian: 34,8%072008: 34,5%2008 Klassenmedian: 35,6%082009: 28,7%2009 Klassenmedian: 31,6%092010: 26,4%2010 Klassenmedian: 29,2%102011: 22,4%2011 Klassenmedian: 27,4%112012: 19,2%2012 Klassenmedian: 21,7%122013: 14,5%2013 Klassenmedian: 21,2%132014: 13,2%2014 Klassenmedian: 17,4%142015: 9,8%2015 Klassenmedian: 13,5%152016: 7,6%2016 Klassenmedian: 13,0%162017: 6,3%2017 Klassenmedian: 9,0%172018: 4,8%2018 Klassenmedian: 6,0%182019: 3,6%2019 Klassenmedian: 4,3%192020: 2,9%2020 Klassenmedian: 2,6%202021: 2,6%2021 Klassenmedian: 2,2%212022: 1,1%2022 Klassenmedian: 1,6%22
JahrPrüfungenTechnische MängelKlassenmedianAlle MängelRückrufe
20224641,1%1,6%5,6%5
202117.1332,6%2,2%8,5%2
202016.5732,9%2,6%10,0%2
201922.2193,6%4,3%12,8%0
201822.0014,8%6,0%14,6%0
201721.4846,3%9,0%15,6%0
201622.1617,6%13,0%16,2%0
201523.1549,8%13,5%18,8%0
201419.31513,2%17,4%24,8%2
201315.20414,5%21,2%29,5%3
201214.85919,2%21,7%34,9%1
201112.89222,4%27,4%36,7%1
201011.84926,4%29,2%39,2%1
200912.61128,7%31,6%41,6%1
200811.33534,5%35,6%46,4%1
20079.24833,9%34,8%46,7%1
20067.68834,2%37,1%47,5%1
20051.41237,0%37,2%50,5%1

Was nach Laufleistung ausfällt

Anteil der Prüfungen, die an der jeweiligen Baugruppe scheiterten. Verschleißteile (Lampen, Reifen, Wischer, Kennzeichen) zählen nicht zum Zuverlässigkeitswert.

Baugruppe0-50k km50-100k km100-150k km150k+ km
Technische Mängel3,7% (4,3)10,7% (14,8)23,0% (26,9)34,5% (35,9)
Prüfungen86.04792.41253.77329.396
Fahrwerk und Räder0,9% (1,9)3,7% (7,1)9,5% (12,6)16,3% (16,3)
Bremsen2,6% (2,6)6,5% (6,2)12,5% (11,2)17,7% (15,8)
Motor, Abgasanlage und Emissionen0,3% (0,8)1,2% (2,0)4,2% (4,3)9,8% (7,8)
Lenkung0,0% (0,1)0,2% (0,5)0,6% (1,0)1,1% (1,6)
Karosserie, Rahmen und Rost0,2% (0,7)1,4% (2,2)4,7% (4,7)9,3% (7,4)
Gurte und Airbags0,1% (0,2)0,4% (0,4)1,3% (1,1)2,7% (1,8)
Licht und Elektrik (Verschleiß)2,7% (3,2)7,4% (8,3)16,9% (16,4)26,0% (22,1)
Reifen (Verschleiß)3,4% (3,4)5,5% (6,0)7,2% (7,6)8,9% (8,9)
Wischer und Scheibe (Verschleiß)3,0% (3,9)4,1% (4,9)5,0% (6,1)5,9% (7,5)
Sonstiges und Kennzeichen (Verschleiß)0,1% (0,1)0,2% (0,2)0,4% (0,3)0,7% (0,5)

(…) = Klassenmedian, gleiches Alter und gleiche Laufleistung

Checkliste für die Werkstatt vor dem Kauf

Abgeleitet aus den Baugruppen, bei denen dieses Modell ab 100.000 km häufiger durchfällt als seine Klasse, und aus offenen Rückrufen.

  1. Motor und Abgas: auf Öl- und Kühlmittelverlust, undichte oder rostige Abgasanlage und Warnleuchten achten; beim Diesel DPF/AGR und Rauch prüfen.
  2. Bremsen: Scheiben und Beläge messen, Bremsleitungen und -schläuche auf Rost prüfen, Handbremse und ABS-Leuchte testen.
  3. Karosserie und Rahmen: Schweller, Hilfsrahmen, Wagenheberaufnahmen und Boden auf Rost und Reparaturspuren prüfen.
  4. Rückrufe: 3 ernste Rückrufe betreffen dieses Modell – lassen Sie sich die Erledigung nachweisen
    • A12/00429/23 · 2021, 2022 · The auxiliary battery terminal may be faulty. This can disable the power steering support. Moreover, the battery terminal can overheat at…
    • A12/01499/22 · 2021, 2022 · Defective straps could affect the proper deployment of the front portion of the Curtain Shield Airbags, which may cause and fail to prevent…
    • A12/0841/16 · 2014 · null The shaft of the steering column could break leading to a loss of steering control and the risk of an accident.

    Ein bestimmtes Auto per FIN auf den offiziellen Seiten prüfen: NHTSA (US) · DVSA (UK)

Amtliche Rückrufe

Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.

  • EU Safety Gate2022

    Transmission joints and/or related replacement joints (such as for the lower suspension arm, battery terminal) may not be properly tightened, which could cause the joints to loosen over time. This could cause a loss of…

    Volltext

    Transmission joints and/or related replacement joints (such as for the lower suspension arm, battery terminal) may not be properly tightened, which could cause the joints to loosen over time. This could cause a loss of vehicle control, increasing the risk of an accident.

    A12/00482/23 ↗
  • EU Safety GateErnst2021, 2022

    The auxiliary battery terminal may be faulty. This can disable the power steering support. Moreover, the battery terminal can overheat at low speeds, increasing the risk of fire.

    A12/00429/23 ↗
  • EU Safety Gate2022

    The break booster may malfunction, leading to an increased stopping distance, which creates a risk of an accident.

    A12/01596/22 ↗
  • EU Safety GateErnst2021, 2022

    Defective straps could affect the proper deployment of the front portion of the Curtain Shield Airbags, which may cause and fail to prevent injuries in the event of an accident.

    A12/01499/22 ↗
  • EU Safety Gate2022

    The wrong brake pedal was installed leaving the gap between the clutch pedal and the brake pedal too narrow. The brake pedal may therefore be accidentally depressed while gear shifting, resulting in unintentional brake…

    Volltext

    The wrong brake pedal was installed leaving the gap between the clutch pedal and the brake pedal too narrow. The brake pedal may therefore be accidentally depressed while gear shifting, resulting in unintentional brake activation.

    A12/01502/22 ↗
  • EU Safety Gate2020

    The seam of the rear seat inner safety belt may break.As a result, the proper functioning of the occupant restraint systems cannot be guaranteed in the event of an accident, increasing the risk of injury.

    A12/00082/21 ↗
5 weitere Rückrufe anzeigen
  • EU Safety Gate2020

    In vehicles equipped with projector headlights, the movable part for headlights' dimming could be deformed due to an incorrect dimming process.This may lead to inability to switch from main-beam to dipped-beam or from…

    Volltext

    In vehicles equipped with projector headlights, the movable part for headlights' dimming could be deformed due to an incorrect dimming process.This may lead to inability to switch from main-beam to dipped-beam or from dipped-beam to main-beam, increasing the risk of an accident.

    A12/01820/20 ↗
  • EU Safety Gate2005–2014

    The glass on the rear door is not properly glued. The glass could consequently detach and only remain attached by one fixation point on the door panel or detach completely from the vehicle.

    A12/1769/18 ↗
  • EU Safety GateErnst2014

    null The shaft of the steering column could break leading to a loss of steering control and the risk of an accident.

    A12/0841/16 ↗
  • EU Safety Gate2013

    null There is a possibility that an internal defect with the front shock absorber rod could lead to the rod breaking. If this happens, the driver might have difficulty to control the vehicle.

    A12/2067/14 ↗
  • EU Safety Gate2013

    null There is a possibility that a weld in the rear axle beam might not be sufficiently strong. In the worst case, that could lead to a breakage of the link between the rear axle beam and the vehicle body. If this…

    Volltext

    null There is a possibility that a weld in the rear axle beam might not be sufficiently strong. In the worst case, that could lead to a breakage of the link between the rear axle beam and the vehicle body. If this occurs, the driver might have some difficulty to control the vehicle.

    A12/0248/14 ↗